You can bring the bulblets on if you like, but they will not bloom for at least two years. Give the bulbs Mediterranean conditions in summer--think the Maquis, where lavender and artemisia grow well. Baking hot, and fairly dry. In winter, give them cold, dry conditions, as can be found in the mountains of Turkey. I live in a climate where tulips multiply and establish easily, so I allow my tulips in containers to continue to grow until the foliage fades, then place the containers in an out-of-the-way spot where they will receive only natural rainfall (very little--about 15 cm rainfall per YEAR) until autumn. I then remove the bulbs and plant them in my xeric front garden (excellent drainage, dry conditions), where they recover regardless of size. I plant both bulbs and bulblets, either one good-sized bulb or two or three bulblets per hole. I do not attempt to recover these bulbs once they have been planted in the ground, because it takes a great deal of effort on my part to dig through the rocks, clay and sand in that garden. Still, if you can replicate these conditions, you can eventually bring the bulblets to flowering size.

Hi Melinda, I am mainly looking for the Species because they are supposedly more perennial then so many other varieties. I do know there are numerous others that are specially bred to be more perennial than others, but 'most' tulips just don't do much here beyond their first good year of bloom. About Perennial Tulips and More tulips that are 'supposed to be' perennials. Might you have any of those from the link above or below? I don't need any Darwin Pink, red, or yellow, as I have those already. Might you have any other named hardy spring bulbs? Sue Here is a link that might be useful: Numerous specie tulip varieties.

I do have a white garden a section of the whole garden, if you don't count the coral Lycoris radiata in August nor the pink Crinum that I cannot kill nor the Spring and Fall crocus. It is unlike Vita's in that hers included many grey leaved plants to extend the effect. My leaves are an emphatically green background for the flowers, Taxus media, Vinca minor (white flowered), Nandina (white berried), Daphne odora marginata, Skimmia japonica (white berried), and the various leaves of flowering plants, roses, ('Katharina Ziemet', 'Blanc Double de Coubert', 'Sombreuil', 'Ilse Krohn Superior', 'White Pet', 'Mlle de Sombreuil', and 'White Maman Cochet' - 'Bolero' died but will be replaced in multiples), Helleborus niger, H.xhybridus and bulbs, Tulipa 'Purissima', Narcissus 'Thalia' and Colchicum autumnalis alba. The Gardenias, Citrus trees and Tabernaemontana grandiflora (an unfussy gardenia relative) reside in this patio garden in the summer so I guess that's more white. Cath

Posted by canarybird (My Page) on Wed, Aug 12, 09 at 11:45 Food Photo Tips: Part 6 - Making a Mini Light Box Hi again everyone. I'm back with another entry on how to use your digital camera for taking tabletop photos. This time I'm going to show how to make a miniature version of a light box, which can be useful for photographing small objects. I'm also working on making a full sized box out of a cardboard printer box which will be used for photographing larger objects, including plates and dishes of food. Mini box (left) Full size box under construction (right) But it might be easier to practise with a mini box to test your results and your skills with a box cutter or sharp scissors. If you have a handy teenager, (or other person clever with crafts and model building, who won't cut off a finger with the box cutter) you may enlist some help with this although it takes less than an hour to make, requires no special skills and doesn't have to be good looking. The idea of a light box is to create a partially enclosed 'white room', with white walls, a white sweep (that paper background we made previously in Part 4 - Seamless Backgrounds), with cutout windows and ceiling covered with white paper, into which we project a strong overhead light and usually a light on either side aimed at the white paper windows so that any object introduced into the box will be bathed in total white light with no shadows. You will have often seen pictures on the web of an object which seems to float on a pure white background. Eg: Cook's Thesaurus. This effect can be achieved in a light box. And it's quite entertaining to see what you can produce from this setup. These last two pictures were taken with my 15 watt CFL desk lamp overhead and one 7 watt CFL spot lamp (that green one) at the left window. Even better would be a 2nd spot pointing at the right window. (I need to go out and buy that 2nd spot lamp...they cost about $12 here so not an expensive item and good for the mini box.) Construction of the Mini Box: Materials needed: small box of sturdy cardboard, box cutter or small sharp scissors, ruler or metal straight edge, pen, glue stick, white paper (I always seem to use printer paper.) I used a small box measuring 5.25 x 7 inches (13.5 x 18 cm) that contained a little desk lamp. You can use a larger box as well of course, but your lights will have to be accordingly more powerful. And I think it's better that you keep it as a vertical box, higher than wider, so that the lid opening will be your ceiling. We can still make the bigger box later once we have caught the idea of how best to create the whitest environment. On my little box I took off the top flaps of the lid and using a box cutter, cut out windows on the sides, leaving a frame of cardboard about 1 inch (2.5 cm) all around, except for the bottom edge of the front 'door' which I cut off. Then I took white printer paper and after cutting it to the size of one side (5.25 x 7 inches/ 13.5 x 18 cm) glued it with a glue stick into the INSIDE of a window side, then repeated that on the inside of the window facing it. Glue carefully and smooth out any wrinkles, which would show up in your photos. To further cover the edges, cut out strips of white paper to size and overlap the newly installed white paper to the back wall and the floor, smoothing carefully so the edges are well stuck down and wrinkle free. Do this on both window sides. Cut a paper sweep to go inside your box, but DON"T GLUE it in, just slide it in so it is removable when it becomes spotted . The measurements should be....width a little smaller than the width of your box. In my example, with a 5.25 inch (13.5 cm) box width, my paper sweep was perfect at 1/4 inch less than the box width...that is at 5 inches wide (11.5 cm). Length of the sweep:....start with a piece of paper a little shorter than the box height plus the box depth (from back wall to front door) and slip it into place until it reaches the edges of the door, as in the photo below. Check that you have a nice curve in the sweep, that it reaches the 'front door' and trim off any excess that sticks up over the top at the back. The finished box should look something like this. Many light boxes also use a thin sheet of paper...often white tissue paper or white tracing paper over the 'roof' of the box and this will give you a soft diffused light. If you are going to photograph any reflective item of metal, ceramic or glass you won't want a reflection of the light bulb in the top lamp showing on your object, so you should then use a thin white material or paper to soften the white glare. If you have a good strong light on both top and sides you will be okay with the diffusor on top as the light will be sufficient. If the light is too strong, then move the lamps away a little from the box. Some examples with fruit: First a sideview of the setup and one example of creating a very soft photo using Exposure Compensation (EV +1.3)... that's 4 clicks up from 0.0... to give deliberate over exposure. Here I was able to get photos using just the overhead desk lamp. If you don't have extra lamps (they must all have the same type of bulb...tungsten or CFL, not mixed) see how you can do with the overhead lamp close to the top opening of your box and raising the EV value to make the picture lighter. This you can do while looking through the viewfinder before taking the photo. A little less raising of the Exposure Compensation, that is.... pushing it up 3 clicks (instead of 4) to EV +1.0, makes the image a little less over exposed and more defined (left photo). With no EV changes to the picture, you would have a normal exposure, as in the second photo. Now you know how to make misty white photos if you wish to have that effect. When you raise the EV value using the plus+, you are actually decreasing the shutter speed of your camera, so it stays open longer, lets in more light and gives you a more exposed (lighter) image. Conversely, when you lower the EV value using the minus -, you are in fact increasing the shutter speed, the shutter closes sooner, letting in less light and your image is darker. If you manage to make this mini light box, try using a PORTRAIT setting, and maybe add a click on the MACRO option as mentioned below. Remember to set the White Balance WB for the type of bulb you are using...hopefully you have a CFL fluorescent in there, and practice using the EV button to lighten or darken your image while looking through the viewfinder. I think this is enough for one day but I did want to introduce MACRO, or closeup photography. If you look at the back your camera you will have noticed a little tulip icon somewhere on or near the round touchpad. That is your option to tell the camera that you want to make closeup photos. You should be able to click on it from any of the other options that you have, such as AUTO, PORTRAIT, INDOOR. By clicking on the tulip icon you will probably bring up three options: OFF, the tulip icon representing MACRO, or another tulip icon with a small 's' beside it. Some point and shoot cameras may not have this second tulip but it refers to SUPER MACRO where you can get even closer to your subject. Try it out....remember you can still be in another mode and add the macro option. I'll explain more next time with examples of how you can capture very close, sharp pictures of food, insects and plants. I hope you are understanding it all and if you have questions please ask here or PM me. So thanks for joining me. I'll be uploading the next installment soon. And please feel free to save the pages on your computer. Sharon (Canarybird) :-) (All text and photos copyrighted) Free for personal, non-commercial use Follow-Up Postings: o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by loves2cook4six (My Page) on Wed, Aug 12, 09 at 22:36 Ahh Sharon. THANK YOU!! When will the book be published :) I'm going to be the first to buy it! o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by ntt_hou (My Page) on Sun, Aug 16, 09 at 20:25 Wow, I learned more in these 6 parts than some photography books I have. Thank you so much !!! o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by antiquesilver (My Page) on Mon, Aug 17, 09 at 19:32 Ditto to what ntt_hou said! And now I'm going to make a light box so I can photograph my silver. Your instructions are great. Thanks for taking the time to do this. Hester o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by canarybird (My Page) on Mon, Aug 17, 09 at 19:56 Thank you again for your comments! They are appreciated. I'm looking forward to seeing your results. Hester I'm sure your silver will look beautiful in a light box! SharonCb o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by antiquesilver (My Page) on Sun, Aug 30, 09 at 0:38 Finally got around to semi-finishing my light box - WOW, what a difference! I gave it a quick trial run using an under counter light as an overhead with a thin cloth on top & a POS snake light on one side. I'm amazed that I got good shots without a tripod, although I know it will be necessary when I use a macro lense for the maker's mark photos. I didn't have time today for that, but wanted to thank you for taking time to enlighten all of us who aren't quite in the 21st century - at least photography-wise! Florentine Pie Server Florentine blade detail Florentine Shoulder detail o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by canarybird (My Page) on Sun, Aug 30, 09 at 6:40 Lovely shots antiquesilver! The focusing looks good but you do need a stronger light to brighten up the images. Keep the thin cloth on top as you have done to avoid sharp reflections on the silver (beautiful piece by the way,) and raise the Exposure Compensation (EV) higher...start with +0.3, then +0.7, and +1.0, taking one or two shots at each and see how they turn out. You would need a tripod as changing the Exposure Compensation will probably slow the shutter speed, opening up the possibility of camera shake. I would also check the ISO setting if you can do that. Perhaps that's not possible if you are using an automatic setting. Raising the ISO increases the camera sensor's sensitivity to light, so a higher number makes the photo brighter. (Same as when using film we could buy ASA 100, 200 or 400 for different film speeds.) For sure you can change the ISO when in manual or semi-automatic modes, which show as M, A, S, or P on your mode dial. I'm so glad to see you are trying this out and showing your photos here! Keep going....you are doing well! SharonCb o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by antiquesilver (My Page) on Mon, Aug 31, 09 at 15:06 I need to buy at least 1 more lamp but I wanted to try it out anyway & the difference (box vs. no box) is amazing even without the needed adjustments. Taking a decent photo of silver without glare, blur, & a tripod is no small feat so P&S is a small miracle! I did play with the EV but overexposure was a problem when going higher; maybe not so much overexposure as a loss of silver details - another problem w/silver. Yesterday, I realized the overhead light I used is halogen & I changed my setting to adjust for it & that got rid of the yellow tones. I can't remember if I can change the ISO in Portrait mode or not - I've found so many things on this camera that I didn't know were there, it's mindboggling! FYI - it's a Panasonic Lumix. o RE: Food Photo Tips: Part 6 - Mini Light Box & Macro clip this post email this post what is this? see most clipped and recent clippings * Posted by canarybird (My Page) on Wed, Sep 2, 09 at 18:01 Antiquesilver...I imagine that ISO is not changeable when in any semi automatic mode. The camera wants to do that for you so it will most likely be automatic. However you should be able to raise the EV just one notch up to +0.3, or get a stronger light bulb. Also try substituting the thin cloth with white tissue paper or tracing paper. The cloth might be cutting out too much light. I know what you mean about too strong a light blowing out the detail on the silver pieces. But keep experimenting to get the right combination of camera setting, light and diffusor. If you are interested in reading photography books, I can highly recommend this one "Light - Science & Magic. An Introduction to Photographic Lighting."" by Fil Hunter, Steven Biver, Paul Fuqua. There are detailed explanations of setting up tabletop lighting with a whole chapter dealing with how to photograph metal objects. You might want to have a look in your library or bookstores. The ISBN (I have the 3rd edition) is: ISBN-13:978-0-240-80819-2 , published by Focal Press. Tutorial number nine will be a few days late this week. Probably have it ready for the weekend since we had a lot to do this week, including rescuing our new cat from a neighbour's locked backyard LOL. (All turned out well there.) SharonCb