The value of the machine as parts depends upon the age. Was made from 1984 to 1989. Most valuable part is the ignition coil, but only if from a later model (1986 or later, three-leg, 81-2810). Retail is $175, I've sold on Ebay for $50 to $75. If it is earlier two-leg (81-1990 or 17-1529) actually retails more at $235, but since they rarely fail and there are relatively few machines still out there, not much secondary market. I've seen them listed for $25 and never sell. Other salable parts are the recoil assembly and the Mikuni carburetor. Bag, BBC, and other stuff is usually too expense to ship unless you have someone local interested.

I have a HRX217HXA mower. The transmission cable broke and was replaced under warranty a year ago (with original type cable). It broke again and they replaced it with the new cable/kit. Now the mower self propelled speed is very slow. Tried adjusting the cable per the owner's manual and still slow. Trying to advance the cable to gain speed and then the rear wheels lock when you try to pull the mower backwards (drive disengaged of course). Took it back to the dealer ( A Harley/Honda dealer where I bought it) and they called and told me there is nothing wrong. Any Suggestions? Will a slipping belt cause a loss of speed? How important is the two control cable bands? ( I made sure they were at the right places when I adjusted it, and then as the mechanic had told me after the cable change that they sometimes hurt more than helped I removed them, but still same slow speed) When I go get it tomorrow (a 70 mile round trip) I will try it out and if still slow show your previous suggestions (for other models) to them. Thanks, Cliff

Personally I think this is a really interesting discussion. I am an engineer at Honda R&D near Columbus, OH. At my location, there are over a thousand white collar workers, mostly technical. Within a hundred mile radius of me, there are a 4 Honda assembly plants, employing around 10,000 people. At other sites in the US and Canada, there are probably another 15,000 workers. Each of these plants is turning out thousands of new Hondas per day. Nearly every Honda/Acura sold in the US (by volume) is made in the US. The engines, transmissions, every major component. Furthermore, Honda actually *exports* cars from the US, something that the Big 3 can barely talk about. Sure, there are niche cars like the S2000 roadster that are 100% Japanese, but that is a tiny part of our market. I think these are pretty impressive numbers, especially if you consider that Honda is only something like the 7th largest market share in the US. Its been here since 1979, I'd wager that in those 27 years Honda has contributed significantly to Americans and their way of life. There are a lot of secure $25/hr plus full benefits jobs available in Ohio because of Honda. The US auto industry lost their way in the oil crises. They haven't been able to turn it around since then. They concentrate too much on short-sighted markets like giant fuel-guzzling SUVs. Its not that the Big 3 makes bad cars, its that they make cars that aren't in demand. Compare a Focus to a Civic. A Taurus to an Accord. Sure, those Fords might last 200k miles, but I'd much rather spend that time in a nice Accord than a hard plastic Taurus. I would rather support the thousands of American workers who build Hondas than support a few suits in Detroit and drive a Mexican Dodge. That said, my garage: 1980 Lawn Boy 7229 1996 Stihl trimmer 1997 Honda Accord (shocking, right?) 2002 Triumph Speed Triple (mc) 1976 Honda CB400F (mc) 1976 Suzuki GT550 2-stroke (mc) 1948 Johnson Sea Horse (outboard) 1949 Evinrude Zephyr (outboard)

Well, you both were right. Shortly after I had posted, my stubborn self went back at it. Cleaned it AGAIN, re-assembled, and squirted some more cleaner for it to start, and ...she kept on a running!!! Rough at first, yes, but she was running. Cycled it through about three warm ups/cool downs, and with each time it was running smoother. The fourth time, I put the bagger on and went to cutting grass. I just can't get over the fact that this baby is 26 years old!! It cuts smooth and even (like it should) and purrs like a kitten. Want a find!!