5 Remodeling Monkey Wrenches and How to Prevent Them
Avoid delays and cost overruns by planning certain parts of a home remodel extra carefully. We show you which ones and how
Anne Higuera CGR, CAPS
August 3, 2013
There’s a lot to think about, select and organize on a remodeling project, whether it’s a single room or a whole-house remodel. Small projects often have the same list of tasks as big projects, and the same potential for material selection and delivery to throw your schedule for a loop. Of course, anything can go wrong during a remodel, but some parts of your remodel will cause more difficulty than others.
Here's what you should keep an extra-close eye on as you’re planning your remodel.
Here's what you should keep an extra-close eye on as you’re planning your remodel.
1. Windows and exterior doors. Window decisions can be some of the most difficult in a project. Windows come in a variety of materials and colors, with hardware in different styles and colors and even an array of screen options. They also have wildly varying lead times. Vinyl windows can arrive in as little as two weeks, while some wood-clad and solid wood windows can take 10 weeks or more to arrive.
Generally, your contractor will install your windows before interior work takes place. And exterior trim and siding can’t be installed before the windows, so they can have a big schedule impact if they don’t arrive on time.
Best practice: Select your window brand early in the process, use the lead time to count backward from when the windows need to arrive and then finalize the order with your contractor at least two to three weeks ahead of that ordering deadline. Confirming things like jamb size, tempering, energy code compliance, egress, obscured glass selection and more can lengthen the process.
Find a contractor in your area
Generally, your contractor will install your windows before interior work takes place. And exterior trim and siding can’t be installed before the windows, so they can have a big schedule impact if they don’t arrive on time.
Best practice: Select your window brand early in the process, use the lead time to count backward from when the windows need to arrive and then finalize the order with your contractor at least two to three weeks ahead of that ordering deadline. Confirming things like jamb size, tempering, energy code compliance, egress, obscured glass selection and more can lengthen the process.
Find a contractor in your area
2. Cabinets. Similar to windows, cabinets affect a wide range of tradespeople who are lined up to work directly after their installation. Flooring, tile and countertop installations are all linked to the casework in kitchens and baths. Ordering cabinets requires multiple layers of design and selection, including decisions on the layout of the room; the function of doors, drawers and hardware; wood and paint; and crown molding. A field measure is also necessary.
Expect a floor plan and drawings showing how your cabinets will look straight on with complete measurements (also known as shop drawings). You'll need to approve these before production can start.
Best practice: Narrow down the wood species and general style of the cabinets early on so that the biggest decisions are out of the way. Knowing the lead time from the cabinet shop is critical, and it doesn’t hurt to add an extra week to that to make sure your cabinets will arrive in time.
See guides to choosing kitchen cabinets
Expect a floor plan and drawings showing how your cabinets will look straight on with complete measurements (also known as shop drawings). You'll need to approve these before production can start.
Best practice: Narrow down the wood species and general style of the cabinets early on so that the biggest decisions are out of the way. Knowing the lead time from the cabinet shop is critical, and it doesn’t hurt to add an extra week to that to make sure your cabinets will arrive in time.
See guides to choosing kitchen cabinets
3. Plumbing fixtures. All of today's retail and online plumbing fixture stores make it seem like getting plumbing fixtures in time for an installation is easy. It often is, but some fixtures and manufacturers have factory lead times and limited availability.
Shower valves and bathtubs are the two elements you usually need for a plumbing rough-in. The rough-in could happen the first week of a bathroom remodel or a couple of months into a larger project. The rest of the fixtures can come late, but selecting these two ahead of time will make it easier to get the rough plumbing in correctly. If you're using stone or another solid-surface counter that has an undermount sink, you'll need to have the sink and faucet onsite during the template process.
Best practice: Don't wait until the bitter end to choose your plumbing fixtures. If you do, at least one is bound to not show up when you need it, or to come with an exorbitant cost for overnight delivery.
Shower valves and bathtubs are the two elements you usually need for a plumbing rough-in. The rough-in could happen the first week of a bathroom remodel or a couple of months into a larger project. The rest of the fixtures can come late, but selecting these two ahead of time will make it easier to get the rough plumbing in correctly. If you're using stone or another solid-surface counter that has an undermount sink, you'll need to have the sink and faucet onsite during the template process.
Best practice: Don't wait until the bitter end to choose your plumbing fixtures. If you do, at least one is bound to not show up when you need it, or to come with an exorbitant cost for overnight delivery.
4. Tile. When you select tile, you have to consider more than just aesthetics. You also need to make sure that the material you select has all the pieces necessary for installation (bullnose, pencil liner etc). Consult your architect and the tile setter if you’re not sure what you need. Still, sometimes the tile that arrives isn’t quite right. On one of our recent bath projects, one of the selected tiles was switched for another material because the colors of the delivered tile were not as expected. The dimensions and colors may not exactly match the sample you saw in the showroom, particularly with natural stone and slate. But even factory-made tile can vary from one lot to another.
Best practice: Try to get a sample from your local tile supplier’s warehouse to make sure the stock that will be delivered is what you expect.
Learn more about choosing and installing tile
Best practice: Try to get a sample from your local tile supplier’s warehouse to make sure the stock that will be delivered is what you expect.
Learn more about choosing and installing tile
5. Flooring. The thickness of a flooring material affects many things, including the rough carpentry work that happens at the start of a project. If you want your floors to “plane out” (not have transitions up or down), making a definitive flooring decision is critical.
Many flooring materials, like wood and Marmoleum, have a lead time for arrival. Then these materials need to acclimate and adjust to the ambient temperature and humidity in the house. If flooring is installed without acclimating, it can expand or contract, causing gaps or bulging in the flooring. Usually four to five days are enough, but some products need two weeks of acclimation.
Carpeting can go in without acclimating at the very end of the project. However, interior millwork is installed in different ways, and there are different orders depending on whether you choose carpeting or some other flooring material.
Best practice: Choose your flooring before your project starts so that your contractor can make the surfaces plane out, and so that lead and acclimation times are not an issue.
Find a home pro near you
Many flooring materials, like wood and Marmoleum, have a lead time for arrival. Then these materials need to acclimate and adjust to the ambient temperature and humidity in the house. If flooring is installed without acclimating, it can expand or contract, causing gaps or bulging in the flooring. Usually four to five days are enough, but some products need two weeks of acclimation.
Carpeting can go in without acclimating at the very end of the project. However, interior millwork is installed in different ways, and there are different orders depending on whether you choose carpeting or some other flooring material.
Best practice: Choose your flooring before your project starts so that your contractor can make the surfaces plane out, and so that lead and acclimation times are not an issue.
Find a home pro near you
Dave Fox is a design/build remodeling firm with a customer focused process, an incredible staff and a close knit... Read More
What are you working on?
Related Products
J.S.Brown & Co. is an award winning, full service Design / Build remodeling contractor with more than three... Read More
Related Stories
Working With Pros
Which Pro Should You Hire for Your Project?
Find out whether you need a contractor, an architect, an interior designer or another professional for the job
Full Story
Bathroom Workbook
How to Remodel a Bathroom
Create a vision, make a budget, choose your style and materials, hire the right pros and get the project done
Full Story
Bathroom Design
How to Prepare for a Bathroom Remodel
By Becky Harris
Ease the disruption of a bathroom renovation with these 10 tips
Full Story
Decorating Guides
15 Ways to Create Separation in an Open Floor Plan
By tidgboutique
Use these pro tips to minimize noise, delineate space and establish personal boundaries in an open layout
Full Story
Kitchen Workbook
How to Remodel Your Kitchen
Follow these start-to-finish steps to achieve a successful kitchen remodel
Full Story
Remodeling Guides
How to Survive a Major Remodeling Project
By Eva Byrne
Get expert tips for improving your home while preserving your sanity
Full Story
Working With Pros
10 Questions to Ask Potential Contractors
Ensure the right fit by interviewing general contractors about topics that go beyond the basics
Full Story
Life
9 Secrets to Successfully Remodeling a House Together
By Laura Wheat
Learn how to put your stamp on a project while avoiding unnecessary conflicts
Full Story
Modern Architecture
How to Improve the Comfort of Your Midcentury Modern Home
By Colin Flavin
You can maintain the era’s signature style in your home while improving its thermal performance
Full Story
Materials
5 New Trends in Flooring for 2024
By Julie Sheer
See the latest looks in luxury vinyl, engineered wood, porcelain, laminate and other products debuting this year
Full Story
A really good article. It seems to be one of the things that trips up most people - it feels wrong to be choosing something like lighting & tiles so early in a project but really does matter. It's also good to have at least some idea of furniture layout for thinking where you will need to place light switches, electrical sockets etc.
These are all good ideas to know if someone is planning on remodeling their house. I didn't know that putting in new flooring and the thickness of it could be a problem. I like the solution of picking it first so the contractors can better prepare it. I would imagine that being on the same page as the contractor would help prevent a lot of problems. http://www.boldcityconstruction.com/services.html