DIY: Bold 3D Dining Room Wall
Mid-century diamond pattern inspires dining room's new look
Vanessa Brunner
January 1, 2000
Houzz Contributor
There are many ways to dress up a blank wall — wallpaper, stencils and paint are just options. But for some rooms, that look just isn't right. Blogger Dana Frieling of Make Them Wonder wanted something with a more custom built-in look for her bare dining room wall. She decided to think outside the box and add some 3D texture in a mid-century style to match her home's decor. Using custom cut pieces of pine and a carefully planned out pattern, she created a unique raised effect that brought a retro touch to her home.
More of this house | More DIYs
More of this house | More DIYs
Frieling purchased:
- (5) 10-foot 1x4 pieces of pine
- (4) 8-foot 1x4 pieces of pine (she used a table saw to cut these pieces lengthwise)
- Liquid nails
- Dap wood filler
- 1 quart of paint
- Paint brush
- Brads for nail gun
- Fine grit sand paper
First, decide how big you want your diamonds to be. Frieling used a mirror as a stencil, but you can choose a size that works best for your wall.
After choosing a size of diamond, set out part of your pattern on your wall with masking or painter's tape. This is a great way to get a visual of how this pattern is going to look and how many columns/pieces of wood you'll need.
After choosing a size of diamond, set out part of your pattern on your wall with masking or painter's tape. This is a great way to get a visual of how this pattern is going to look and how many columns/pieces of wood you'll need.
Measure your wall's height and width and write it down. Find a piece of graph paper to plot out your pattern. This technique is a lot like what Shoshana used in her Pizza Box Stencil Wall DIY.
To determine how many columns you need, take the length of your wall and divide it by the size of the diamond. For example, Frieling's wall was 160 inches wide, and her diamond measured 20 inches from point to point. Since 160/20 = 8, she needed 8 columns to fill up her wall.
Play around on your wall with painter's tape or with a new sheet of graph paper to figure out how many diamonds you want in each column. Frieling decided to do 2 diamonds in the first column, 3 in the second column, and repeat on through. Once you've decided, draw the completed pattern, measured to scale, onto your graph paper.
To determine how many columns you need, take the length of your wall and divide it by the size of the diamond. For example, Frieling's wall was 160 inches wide, and her diamond measured 20 inches from point to point. Since 160/20 = 8, she needed 8 columns to fill up her wall.
Play around on your wall with painter's tape or with a new sheet of graph paper to figure out how many diamonds you want in each column. Frieling decided to do 2 diamonds in the first column, 3 in the second column, and repeat on through. Once you've decided, draw the completed pattern, measured to scale, onto your graph paper.
Now it's time to transfer your grid to the wall. Instead of trying to deal with masking tape again, Frieling and her husband used fishing line (you can also use string) and thumbtacks to create a plumb line, which marks the center of each column.
The fishing line was marked with sharpie where the top and the bottom points of each diamond should be. Since Frieling only used single piece of fishing line, she marked the marks for even columns with a red sharpie and odd columns with a black sharpie. Moving the fishing line across the wall at the correct intervals, she marked out the correct dots for each column onto the wall. (For more clarification on this process, check out Frieling's post here).
After you've marked your wall, it's time to make your diamonds.
The fishing line was marked with sharpie where the top and the bottom points of each diamond should be. Since Frieling only used single piece of fishing line, she marked the marks for even columns with a red sharpie and odd columns with a black sharpie. Moving the fishing line across the wall at the correct intervals, she marked out the correct dots for each column onto the wall. (For more clarification on this process, check out Frieling's post here).
After you've marked your wall, it's time to make your diamonds.
Cut the correct number of pieces for your diamonds using a miter saw. Put four of the pieces together and attach each corner with finishing nails. Fill in the nail holes and corners with dap wood filler. After each piece is dry, rub everything down with sandpaper to get rid of extra wood filler and create a good surface for painting.
Use the band saw to cut your straight pieces. Since these won't all be the same length, make sure to measure them carefully. Frieling marked each piece with a number on the back, so she knew exactly where it would go when it was time to assemble.
After painting each piece, she used liquid nails to attach each diamond to the wall where the dots were marked on the wall, and put in finishing nails with the nail gun for extra stability.
The straight pieces were added afterwards in the same manner — after double checking that they fit correctly. The corners between the straight pieces and the diamonds were a little rough, so Frieling sanded them down, added more dap, and then touched up the paint.
See more of this house. For more details on this DIY, check Make Them Wonder.
More DIYs:
Pizza Box Stencil Wall
How to Paint a Sisal Rug
PVC Pipe Wine Holder
More DIYs:
Pizza Box Stencil Wall
How to Paint a Sisal Rug
PVC Pipe Wine Holder
Related Stories
Organizing
How to Create a Joyful, Clutter-Free Home Office
Follow these steps to get rid of the paper piles and make room for beauty and better organization
Full Story
Remodeling Guides
15 Ways to Create Separation in an Open Floor Plan
By tidgboutique
Use these pro tips to minimize noise, delineate space and establish personal boundaries in an open layout
Full Story
White
Design Pros Share 10 Favorite Creamy White Paints
By Becky Harris
These off-white color choices include versatile tones, warming hues and pleasingly soft shades
Full Story
Entryways
4 Designer Tips for a Fashionable Entry
By tidgboutique
A pro shows how adding color, statement pieces and more to a foyer can set the right tone for the rest of the home
Full Story
Most Popular
7 Major Decorating Mistakes and How to Avoid Them
By tidgboutique
Gain confidence to start your interior design project with this advice from a professional designer
Full Story
Living Rooms
4 Must-Have Features for a Small Living Room
By tidgboutique
A designer shares important ways to live large in a tight space and make it look stylish
Full Story
Most Popular
7 Common Decorating Mistakes to Avoid
Pros share solutions to design problems they often find in people’s living spaces
Full Story
Most Popular
How to Decorate a Living Room
By tidgboutique
A designer offers tips for creating a comfortable space that reflects your style
Full Story
Budget Decorating
Where to Splurge and Where to Save When Decorating
By tidgboutique
See where it makes sense to invest in durable essentials and focal pieces, and where to economize on other things
Full Story
Lighting
Pro Tips for Lighting 10 Rooms and Outdoor Areas
Get professional advice for lighting your kitchen, bathroom, living room, office, patio and more
Full Story
Wonderfull idea, Very Cool
This is really cool! I would go one step further and put a few random spots of color in the diamonds or turn a few into frames for family photos.
You can also use square wooden picture frames for the squares to reduce the number of cuts.