hi Avignon, Yes, I am in NYC... kids and DH are asleep and I am roving around the internet planning tomorrow's activities (enjoying a glass of wine while doing so!). About the island. Yes, I think Honed granite on the island would work great. You'd have absolutely nothing to worry about. In my kitchen, I find the granite to be more durable and easier to clean and work on than the wood. That is not to say that I don't love the wood... I do, very much, BUT I think the granite is easier to clean. For instance, I would not prep meat on the wood. I am a bit of a germaphobe and would feel that I'd have to scour the wood too much to get it clean whereas the granite being such a hard surface, not a problem. I am happy I chose the wood and I would choose it again. I think it adds a lot of warmth to my kitchen and I like how it ties in other elements in my eating and living areas. I thought I would be chopping on it all the time, but as it turns out I am too smitten to mar the surface and have only used it for light prep, saving the heavier stuff for the granite. In terms of maintenance, I clean the wood with a damp wash cloth fairly often... this gets it looking really good. Every so often (maybe once every three weeks) I oil it - this is a quick and easy process and nothing to fear or avoid. I use food grade mineral oil for oiling. After oiling the wood looks amazing - it really comes back to life with the oiling. When choosing the wood top for the island, I had debated going with a contrasting color/wood for the cabinetry and keeping the counters the same as the perimeter OR keeping all the cabinets the same and changing out the counter OR same for cabinets and same for counters. Since my kitchen is small, keeping the cabinetry the same throughout seemed the right decision, but adding some warmth with the wood island top makes a nice difference (IMHO). HTH

Heatheron40, very nice. I asked a question about doing a tile countertop in our guest cabin recently as I feel like the look would complement the cabin aesthetic. Also I’m dying to learn to tile and thought it would be a fun place to start as it’s not an everyday space and I could take my time. Most of the responses were against. Basically stating the grout would make me crazy. The guy at the said what you’re saying I think, he said that modern grouts are more resistant to staining and such, and also to go with a tinted grout of some sort. I love your use of pattern to give it interest and intention!

Thank you for all the positive feedback! It's greatly appreciated! The counter top is called louvre white marble (I will add a picture of the slab we chose from and a better picture of the counter top). The shower wall tile is called Style Selections Blairlock White.

Here are a some pics and my dilemma. Keep in mind this is my old fridge...new one comes today! Here is how we ended up with this: I have never had an enclosed fridge so didn't think about the peninsula dying into panels or how deep panels were going to be. I "semi" designed the new footprint and took it to Lowe's where the KD took over. (yes---I know......) Bought Schuler plywood with maple fronts cabinets. Although the kitchen designer had the model number of the fridge we were buying, which is a full-size, she designed the kitchen with 24" deep panels. She knew I was trying to have the look of an enclosed fridge. Being that I've never had an enclosed fridge, it was something I just didn't think of until the install started. Evidently she put a counter-depth in the design program because the elevation sketches she gave me showed an enclosed fridge. "Luckily" the panels actually came in wrong and were cut at only 23" for some strange reason and the installer caught it right away when looking over everything. Otherwise he probably would have installed them and I would be stuck. So called Lowe's to reorder the panels and somehow in all this it suddenly dawned on me that a full size fridge was going to be deeper and require deeper panels. I thought "no problem! Yay I can order them at 30!" By this time the KD had quit her job due to the pandemic. The other KD didn't know what was going on so we called in the Schuler rep. She was the one who immediately told me that those 30" panels would be sticking out in front of the peninsula. She asked if we could move the peninsula forward since the other side is an overhang for seating, but we couldn't since it would bottleneck the entrance into the kitchen down to under 36" and getting rid of an existing bottleneck was one of the reasons for the re-design to start with. So we had a dilemma. We cannot go down to a counter depth fridge which was the other option. What I decided was to split the difference and order 27" refrigerator panels. The fridge without doors is 29.5" so I will have about 3" of the side of the fridge sticking out which I don't like, but while I want my kitchen to look beautiful, I value the functionality too. The old fridge that you see in the pic sticks out a total of 32" The new fridge will stick out 34 with doors but without handles (4.5" of that is doors that would stick out anyway) Here's the really complicated part....we will be installing decorative panels on the end of the fridge as we have them on all the cabinets. This is how you enter the kitchen and I don't want that big blank space there next to the peninsula. The panels should be installed with just 1/4" reveal. I posted a photo below of how the panels look that are already installed on the side of the pantry that adjoins to a 17" high window seat. Luckily those face the opposite way from the fridge panels so you will never see both at the same time. I also posted photos of us holding up panels on the side of the fridge (they are NOT the right size panels...we have to order those still---we just used these to look at the right edge as to how wide to make the panels.) Also keep in mind we can remove the quartz backsplash piece if that would look better. That was not originally planned...the panels were going to sit directly on top of the countertop. So do we order the panels with just the 1/4" reveal to match the panels in the rest of the kitchen? Or, as the Schuler rep recommended, order the panels so they are the same width with the countertop, leaving about 1 3/4" reveal on the right side, but then your eye follows the countertop all the way up. I asked the countertop templater guy if I should just lengthen the overhang on the kitchen side of the peninsula to 2.5" to bring it out to within 1/4" of the fridge panel but he said no....I'm now thinking I should have insisted on it. Especially since we have full overlay cabinets that already make the overlay look very small since the 1.5" planned overhang is measured from the box, not the front of the drawers. Note how small the overhang looks to the drawers. And then of course, they had templated for a 1.5" overhang and I only got 1.25" UGH! Every quarter inch there would have made the reveal on the side of the fridge less. Suggestions appreciated! I'm hoping that I will eventually make peace in my mind with this issue and won't notice it but it is driving me crazy right now. I think of all the things that screwed up just because of this one error by the KD that I didn't catch and I am beating myself up for it!