Need to identify brand of this tub faucet?

Danielle Ronay

10 years ago

Please help! My faucet leaks, can anyone tell me the brand this is? Logo looks like a star of sorts.. THANK YOU!

Featured Answer

PRO

AQ Lighting Texas, Inc.

10 years ago

I agree with @decoenthusiaste the majority of leaky faucets are caused by worn down washers. You can pick up a washer at Lowes or Home Depot pretty inexpensively. I'd bring the old washer with just to make sure you grab the right size.

Sort by:Oldest

Comments (19)

decoenthusiaste
10 years ago
Probably just needs a washer. Could be a brand or just a decorative star. Try the simple fix first.
Related Discussions
Shower trim and sink/tub faucets have to be the same brand/line?
Q
Comments (6)
Is your tile or other finished wall surface already installed? If not it's easy From my experience With the finished shower walls in place, replacing valves require going in from the back side of the wall. Otherwise you'll need to tear out the installed tile. If you have tile installed and access to the back side it's a matter of opening the drywall and removing the valve from that side. The existing tiled opening for the valve, may not be the correct size for your desired valve and would be a problem and probably require taking out the tile.
...See More
How far should the tub spout reach over the tub & other questions
Q
Comments (20)
Not a silly question. When you have water forcefully hitting the inclined side of the tub high enough up, though most of it will splash downwards, some of it goes sideways, and some of it -- counterintuitively -- splashes back upwards from where it strikes the side and you can actually have a small puddle start to form on the floor in this area from water spray bouncing up and escaping this way. It the water doesn't hit the side of the tub, but only the bottom of the tub, it doesn't bounce high enough to do this.
...See More
Please help us pick a freestanding tub and floor mount tub filler?!?!
Q
Comments (2)
Delta is a great plumbing brand. Reliable, and you can find parts anywhere. That import junk off of Amazon isn't even legal to sell here. They don't submit to lead testing or any other type of plumbing safety tests. There’s just no one left to enforce that. Tubs are the same. The good ones are not cheap. Kohler makes great products.
...See More
Can somebody please help me identify this brand of bathtub faucet? Thx
Q
Comments (0)
...See More
Sheri Leigh
7 years ago
Did you ever find the brand? I have the same thing in our mother-in-law unit. it's not leaking , but I want to replace it. Can someone please help?
harrisongwhitney
7 years ago
It's a Valley brand faucet. I had the same problem with mine and found this guide extremely helpful. Also, this site will provide you with any parts you'll need. (you can buy them straight from the provided link, but I found them cheaper on Amazon after using it as reference).

The problem is most likely the seats and springs, though I replaced the cartridge also while I was at it. The leak is 100% fixed.

NOTE: Seats can be tricky to remove, especially if they're extremely worn. Although not necessary, a seat wrench could make the process much easier.
Sheri Leigh
7 years ago
Super helpful! Thank you so much!
jsenseney
6 years ago
harrisongwhitney, as Sheri said....Thank you so much. Identifying the "Valley" brand and providing the guide...helped make this such an easy task. Much appreciated.
Linda
6 years ago
Go to Home Depot or Lowe’s and you will find it. It is a contractor grade and is in almost every apartment you walk into.
Phyllis Reynolds
3 years ago
Oh my God THANK YOU! Mine has been leaking forever and I want to try a cartridge first before I tear the whole shower out because we cannot access anything from behind it (condo!)
Tom Avila
3 years ago
Valley. Home
PRO
Integrity Pro Window Cleaning
2 years ago
THANK YOU!! I could not figure out what cartridge I had until i found this!!
scott reese
2 years ago
Ha! Same 1 here, too! Was amazed Google lens popped the exact same picture up as mine! Also leaking steadily. Was searching and ran up on this first, for a change!! Thanks!
George Reid
last year
What brand faucet is this?
scott reese
last year
Valley, in case you're still searching. Just saw this email.
Matthew Nelson
last year
hey @scott reese, did you replace the cartridge to fix the steady leak? The house i just purchase has same one and has a steady drip. Thanks in advance!
scott reese
last year
Hey, Mathew. We did replace that but recently, here about a year later, it's starting again. A friend did it and replaced the handle, which is loose, and I can't get the little screw to tighten up at all! It's like it only turns a couple turns either way and that's it. He may of not done something right! It was good, though, for a while! Got it at Lowe's, said it was kinda difficult to find! Good luck!
Phyllis Reynolds
last year
last modified: last year
Get actual Valley parts here! This is where I got mine and fixed the problem.

www.plumbingsupply.com
Matthew Nelson
last year
My handle looks just like the one in this picture but last night took a look at the sink handle which is exactly the same and noticed "MOEN" in the silver border. I guess that places me with a different type of cartridge. Thanks for the help!
Bea Vernon
10 months ago
I'm trying to identify a shower handle that has no name, only a "logo" that looks like a shield or upside down iron (yes, laundry iron) with letters/engraving that looks like UPC and it has an encased period/dot to lower right of it. I need to replace the cartridge. Tenant still needs use of shower so I can't remove without have the replacement. Please send replies to msbeaandthefinaldetails@gmail.com. I don't know if I would ever find this thread again.
PRO
BeverlyFLADeziner
10 months ago
It would be helpful if your tenant would send you a picture of what was there.so you could take it to your local plumbing supply shop. They might know more than the local home depot or lowes.