I've used CoreCentric for several board repairs for customers. They are authorized to refurbish boards for most of the manufacturers. Pretty fast turn around time. For the most part I think I get the boards returned to me with-in 4 to 5 days

LG washer WM2016CW reqd replacement of spider...spider is the suppprt arm that holds the tumble stainless drum built in with shaft assy..if u can replace brake pads and spark plug then u can don this washing machine..if it makes a lot of noise or smokes during high speed spin..possible bearing or spider..So I open up then the inner and outer bearing and seal are all in good shape except cracked spider arm...the spider is the one that cracked....the outcome of dirt on spider arm is so bad even we are cleaning every 5 times of use.. but anyways I did replaced shaft seal and gasket for the tumble drum, spider and bolts ..expenses is 95.50 US and heavy cleaning like new..front loading is not really recommended. .better to buy top loading.I am going to explain this later....all of front loading design have the same principle..every brand of washing machine will last for 25 yrs if they can supply parts, so easy to fix and very basic..front loading use less water ..this is one of the reason why the spider arm gets dirty so easy..not like top loading always soak with water...

My Ge oven was not working so I, went here and found the code to fix it. Put the code in and it fixed it. You may find some help here.http://www.appliancepartspros.com/repairtips/repairtips_appliance+fault+codes.aspx#GE%20Range%20/%20Stove%20/%20Oven%20Fault%20Codes

Hi CJ FIREFIGHTER, It depends on what other symptoms that you may be getting on your TV. When you say that the screen keeps flipping between picture and a black screen, are you still getting back light? (Meaning, is the TV still turned on?) Here's a simple test: when your TV starts flipping between picture and black screen-->tap on the screen very gently with your index finger to see if there is still back lighting. If there is back lighting, this could be an issue with your main board (this is the circuit board with your HDMI, A/V IO, etc) or the tuner board (if it is separate from the main board). If you're not getting back lighting, do you still hear sound when it flips between picture and black screen? In particular, are you getting sound from the black screen? If you are getting sound from the black screen, it could be the LED Driver starting to go bad or the TV panel itself. If you're not getting sound when it flips from picture to black screen, it could be your main board. Here's a simple test: try connecting the A/V cable to an external speaker to see if the audio works via an external speaker system. If it works, then it could be your coaxial cable that connects to the tuner on your TV, the port that you are connecting it to, or the signal itself. If you have a laptop or desktop with USB-to-Tuner card installed, try connecting the coaxial cable to your laptop or desktop to see if it does the same thing: flip between picture and black screen. If it does, then switch out the coaxial cable with a new one and try again. If it still persists, you can safely rule out your laptop/desktop and TV being the problem. If not, and the symptoms only appear on your TV, then it's most likely the main board. To a lesser extent, depending on the model of your LG TV, it may be that the power supply may not be giving the main board enough electrical current to keep the signal consistent--hence the same symptoms occur. Main boards and power supplies are typically expensive and can be hard to find. LG and other TV Manufacturer don't typically sell their circuit boards to the general public directly. You'll have to find alternative sources like ShopJimmy.com or TVPartsGuy.com. By the way, if you have any lighting, home decor and/or accent furniture needs, we encourage you to visit us at: Lusive Decor (fully custom lighting-->caters to high-end, luxury hotel chains, casinos's, resorts, and spa's) Luxe Light and Home (semi-custom to nearly full custom lighting-->caters to high-end residential clients) Elements of Design (semi-custom lighting, home decor goods, and accent furniture-->caters to budget luxury residential clients) Thomas Cooper Studio (fully custom lighting--caters to clients looking for high-end, unique, one-of-a-kind light fixtures) We hope this information will help you make a more informed decision on your home needs. Very Best, Tai Truong Elements of Design 3400 Medford Street Los Angeles, CA 90063 tai@lusivedecor.com www.elementsofdesign.com