Just chiming in - sorry for the lack of updates! It's been 2 years since our (very stressful!) kitchen renovation, but we're super pleased with how everything turned out. (I know you were asking about laundry-bathroom but just gonna write a general review in case others are interested.) We love our Sektion cabinets; the drawer-in-drawer came in super handy for storing things like medication, manuals/warranties, afternoon tea supplies, and lightbulbs/tools/odds&ends. On our stove side we use that drawer-in-drawer for lesser used or back-up cooking utensils (ice cream scoop, tongs, can opener, tea infuser, etc.). I did map out all of our storage when considering what size drawers/cabinets to get, and most everything fit pretty much as planned. For doors, we went with the Ringhult White. It was the most expensive at the time and made me super nervous, but we bought it during the kitchen sale and all the IKEA showroom staff said this was the top seller and best quality door they had. It also satisfied my need for a 'white-white' door, and provided a reflective surface that would help brighten up our lower level flat. No regrets. Easy to clean, no problems with scratching, steam, moisture, etc. I actually found some doors and drawers in the As-Is section at IKEA, so ended up saving $ by returning the brand new boxes for as-is items that were in perfect condition. (Hint: Even though the blue protective plastic on the doors might be scratched, when peeled off, the foil finish was still perfect / unharmed underneath.) We did have one problem with a faulty faucet leaking into the sink cabinet right after we installed it, unfortunately. This did create a little bit of bubbling in the particleboard but since no one is ever looking into the back of our sink cabinet except for future plumbers, and functionally the cabinet has held up just fine, I don't fault IKEA for this - I think any cabinet would have had some cosmetic damage if someone was pouring a cup of water onto it every night for two weeks. Also, we built all the cabinets and drawers ourselves, and screwed in all the handles as well. Though tedious, after the first few, you get the hang of it. There are a few details to watch out for (like how to position and nail in that plastic 'fat L' piece on the back) but overall this was inconsequential to the final result. Our contractor just helped us hang the cabinets on the wall (since I kept freaking out about how they could possibly stay up under all that weight)! Here are some After photos of our kitchen (a few are focused on the floor since I was writing a (very favorable) review on the wood-look tile we used). Pardon the mess... I wish we could live a Pinterest-worthy minimalist life, but alas... :P. Hope this helps and happy to answer any other questions! _____ P.S. One thing we forgot to get (that the IKEA kitchen staff forgot to tell us about) was the metal countertop support piece: https://www.ikea.com/us/en/catalog/products/70274628/?query=Countertop+support+fixture Most contractors are able to improvise if you forget about this -- we still ended up adding a sheet of plywood under the quartz -- but I think this helps 'lift' the countertop for sink installation and allows the drawers and doors to close properly. We ended up having to drive back to IKEA multiple times just to get enough of this $2.99 FIXA thing :(. My advice is to buy more and return the ones you don't use. Also, some of the hinges were annoying to install (mainly for the sink cabinet because our large sink got in the way) as were the soft-close dampers, but I had my local IKEA Kitchen department on speed dial, and also referenced many many YouTube videos. Good luck!

The left is mounted on the side panel and the right is mounted on a special piece that IKEA sold for this application. Don't know if they still sell it, but I'm sure it could be reproduced. The center piece is basically a 1 1/2" piece of MDF that extends the depth of the cab and is secured at the back and front to the bottom of the cab. It functions as a short cab wall and I have a drawer rail mounted on both sides. In your case you could position in where you need to achieve your right wall. I hope I'm explaining this clearly enough, but hope this pic helps. I can take more pix tomorrow if that will help you. IKEA under sink pullouts

@alerievay -- We ordered samples. Honestly, I'm not sure its worth it to get the SemiHandmade glossy white over the Ikea glossy white. The Ikea white is very nice; sturdy and a lovely finish. The SemiHandmade walnut is gorgeous though; the grain is beautiful. I think that the wood is where SemiHandmade really shines.

Here's ours. What I ended up doing was getting a 15" deep drawer for the 24" deep cabinet. I still had to use a medium depth drawer, the deep wouldn't fit. You can see the automatic cabinet opener installed on the bottom of the cab, which works moderately well.