Sam Goh, Most dealers would be happy to sell to you even if they are hours away. But how much are you saving for that hassle? The local dealer is less likely to help you out with any problems if you left the area to make your purchase. That one small change you want to make after the fact might be $200 from your local dealer, but $800 if the other dealer has to make the drive to you. Same with Home Depot-do you think HD is going to help you at all if you need help later? If it's an appliance that will wear out in 5 yr anyway, that's one thing. When it's a part of your house that will be there for decades, I'd be glad to pay even a few thousand more from a reputable dealer that will be there for the minor problems. If you have ~60 windows, just keep in mind that it will be exponentially more expensive for you if you have to change them all out in 5-10 yr because they're junk... Just my $0.02, hope you can find a good solution that works well for you.

No, those are not installed prices. Just delivered to new construction site. The framers are installing them, under my supervision. Yes, the Andersen door we selected is terratone, a darker color than the Marvin color, but it is a door, not a window and the colors actually contrast pleasantly. Others might have a different opinion, but we liked the combination. I'm pretty sure the Andersen warranty is the same as the Marvin, and this door is under a porch that extends out up to 16 feet. It will seldom see any blowing rain or any direct sunlight. As for the showroom doors we looked at, the Andersen to us was just a better looking door. But the fit and finish looked much better to us. The Marvin's weatherstipping while probably effective looked sloppy to me, uneven, sticking out here and there. The door operation was not as smooth as the Andersen. And about $250 more in cost. So we went with the Andersen, even though I REALLY wanted to like the Marvin as it would have been easier to get it from the same dealer as my windows.

Dealing with a similar sutuation. New build with same windows. I was a little surprised when i noticed the exterior mitre joints, as mine are identical. One thing i know for sure is that “damage” you think is from the factory is 100% from the installer. Mine were installed with way more damage. Aside from the major damage, I did have those scuff/scratch type marks all over several of mine as well, the good news is - they literally wipe off with a decent amount of elbow grease. I was happy when I realized it wasnt permanent.

I did mix them all throughout the house (my window style is a cottage 4-over-1 grid with both interior and exterior grids), and after all my fretting, no one would ever be able to tell from the inside or outside! (I even have to look and try to remember whether some of the casements are 100s or 400s.) If it weren't for needing some very specific sizes (and wood grids to stain in our den), I would do all 100's because I cannot tell the difference in terms of operation/quality on the casements and you can barely discern the difference in terms of looks. And even in rooms where I chose the 400 series because I wanted to have double-hung windows, I wouldn't do it again....as appealing as the notion of being able to open the upper or lower sash was, what I've found in day-to-day living is that I only ever open the bottom sash, so I would've been just fine with simply doing single-hungs! Overall I'm satisfied with my Anderson windows, but I like my friend's Marvin Integrity windows better than mine--hers operate better and just have more of a "quality" look (mine still look fine.....I was actually going to do Integrity originally, but they did a price-hike during construction, and I just couldn't justify the extra $15-20K). I will say, however, that my Anderson 100 sliding windows that I did in the basement are ATROCIOUS in every way. Incredibly difficult to lock (you have to slam the window shut in order for the locking mechanism to "catch"--I far prefer the manual latches I had on my previous sliders), don't slide open very smoothly, let dirt in (we live in a very windy climate but still I've never seen so much fine dirt piled up on a window ceil!), super cheap--the lock plates have snapped or broken off over half of them in just the first year (and we almost never even use them). Needless to say, the inexpensive vinyl sliders we had in the basement of our last house were far superior.