Thanks for the ideas. The spread for the 2 outer holes is 4 3/4", but the footprint is 6". So a pull with that spread, but with longer ends would be ideal. the other thing is I need them by 6/25! Sabjimata - I may consider a 6"pull and have him plug all the holes, I had not thought of that:) It would be nice if the pull was thicker also to help hide the 3 holes, I will look at RH website. dan1888 - antique silver is a great idea, do you know who carries this finish? Mostly I have seen Satin Nickel, Pewter or ORB finishes.

You have a few choices: 1) fill the holes and then you can pick whatever hardware you like with no restrictions. 2) Use pulls and/or knobs with a backplate. Search on myknobs.com for "backplate" and you'll see some examples. 3) Use the cup pulls that you like on the drawers and then a coordinating knob with a backplate on the doors. Something like this one: http://www.myknobs.com/libp28198stbc.html 4) Use the cup pulls that you like on the drawers and fill 1/2 the holes on the doors and use the other hole for a knob.

We used reproduction glass hex knobs in depression green in our 20s house. I like both of your glass options. Lots of color options http://www.houseofantiquehardware.com/drawer-knobs-hexagonal-colored-glass?utm_source=froog&utm_medium=cse-nc&utm_campaign=gdf&partner=froog&gdffi=acd9967c52ff4737a3a3e0a43a275a41&gdfms=4D8B9E98A73D4E3AA121E38182BAA01D&gclid=CjwKEAiA6rrBBRDsrLGM4uTPkWASJADnWZQ4yBrbQLhoo8W5nqABP30721xAeEfyEHPjEWthi2RXMhoCrXbw_wcB

Black?