This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

I am not sure what wood your trim is. It looks a little like mine did - 1970's dark stained pine. If it is, no problem with painting it. If it is oak and you like it, you might want to think about it. You can paint the trim and leave the doors wood - even leave the vanity wood - which is what I have in my home. Not my house: White trim with wood doors - and white wall with a gray undertone: This is my older, kids bathroom. The floor is not gray, but white tile with gray grout. The trim is white, vanity and doors are wood. [https://www.houzz.com/photos/my-pics-work-in-progress-phvw-vp~53121047[(https://www.houzz.com/photos/my-pics-work-in-progress-phvw-vp~53121047) A color that seems to bridge the warm / cool divide is SW Sea Salt - though try a sample first. Here it is in a dining room working with the white trim and the warm wood floor: White is a neutral and can work well in a warm toned home - and I think the gray in your floor is not so overwhelming that it can't work with a wood vanity and door.

Shown in picture: Lifeproof sterling oak vinyl flooring

My opinion will be biased because I have very similar tile in my master we redid 12 years ago. 4" squares on the diagonal for the shower floor and 12" squares on main floor and up the shower walls. Coincidentally we are in process of redoing my kids' bath the past few weeks (it was also redone 12 years ago) because a hard-to-find leak in the tub prompted us to consider replacing it....which then brought about the issue of replacing the tiled tub-surround that would be damaged...and we would also have to try to retile some spots on the floor because a new tub would be a smaller footprint leaving some bare spots once old tub was pulled out. My point is that we also had to figure out the whole, "do we do an updated 'patch job' to save a lot of money, or do we just gut it and accept the cost as the price of being at peace with it/enjoying a new look and improved function. Right or wrong...which is always a very subjective thing....we gutted it and I'm thrilled. I was not interested in painting my cabinets just to have them have peel-issues due to steam, and we also got rid of the tub altogether and opted for a stand-up/walk-in shower for my older kids. Resale was considered on this issue...but by the time we move, someone can either love it as we've made it, or we will price the house with an "allowance" in mind. The old space had hot-chocolate colored walls and 'slate' porcelain floor and tub surround...an overall warm and cozy feel but also tired and dated. The new space is a porcelain 'marble' hex with white subway walk-in shower that is awaiting glass doors...an overall calming feeling that is also bright and fresh. I now actually wish SO BADLY that I was able to redo/retile MY whole bathroom (tile similar to yours). And there's nothing wrong with my bathroom, and a planned paint job on the walls will help me like it even more...... In my kids' bathroom, however, even unfinished with the floor and shower tile installed just waiting for the rest to come together (waiting on backordered tile base moulding) ......... I walk in and just smile and breathe deeply because of the way the space now makes me feel :) So my very biased vote is to gut it ;) ;)