I got Swanstone walls for my tub/shower combo and I love the material (kit ordered through Lowes with 15% "moving coupon" discount anyone can request). I wanted something that would stay clean and never have icky grout. My color Prairie is speckled and matte a bit like stone and does not look like cheap plastic. See this link for the color Glacier, the white in the Prairie Collection made from recycled materials. From the site's contact link I requested a color sample and they sent it right away. Below is the link to the Swanstone kits page. I ordered mine from Lowes and they can help you pick which one is right if you bring in your measurements. The Swanstone built in tall shower niche I got has the soap dish built in and has worked out great. I also learned in the thread about dispenser units for liquid soap/shampoo/conditioner and now I don't need any bottles in the tub/shower. Swanstone new recycled content colors http://www.theswancorp.com/index.php?page=green_page Here is a link that might be useful: Options for tub/shower wall kits Here is a link that might be useful: Swanstone shower options

You have a workable situation very similar to one we encountered a couple of years ago when we had a frameless shower door installed in a renovated bathroom. I would HIGHLY recommend that you have a professional do the installation from the measurement, ordering, and final installation. Due to circumstances I won't go into, an installer who did not make the initial measurements tried to do the installation for our project. He was unable to make the shower door work. To make a long story short, it took several months to get it right. The good news was that we had worked with a reputable kitchen-bath showroom who stood behind their product so we didn't suffer any loss other than the inconvenience of the delay. Had we been the ones who had done the measurements, I'm afraid we would have had to absorb the financial loss of a quite expensive shower door.

acrylic showers have thier place if you can live with it, it will be cheapest route. they do atleast dry out between showers, can be easily serviced. the only downfall of them is the wasted/lost space. In a average 32 acrylic the actual room inside is more like 28 1/2" and thats anywhere there is no shelf or handle, you loose another 9 inches in each corner, thats where they need the most support (for shipping) I am continuously asked about this question by my clients. Here is my opinion and why. I suggest the use of a poured cultured marble pan. we do the others but this is why. I do not like the way that the drain attaches to the liners in a wet-bed, I have been called back to 3 showers in the last 5 years where they have began to leak. none of the 3 were my fault, but all 3 had to have the floors removed, and rebuilt. all 3 was from the plumbers flange, 3 different plumbers were used by the homeowners. 2 leaked because the seal gave up on its own over time,(obviously they were not tight enough) plumbers had to pay me to redo. the 3rd I was paid by homeowner, because he admitted to plumber to using a toilet plunger to try and unclog the drain, that was full of hair. In doing so he blew out the seal, when the clog would not move. but there are more reasons than that. I have repeatedly been called in to redo showers here in the south (NC)because of mildew/mold. if you live in humid states rubber liners with wetbed is just not smart. it is just that a wetbed. Anyone can say what they want, seal it every year, or not the floor of a tile shower takes days/weeks to dry out after a shower. this combined with the fact that the floor and every wall contracts with temperature guarantees you that in a tile shower the corners Will crack no matter how small. relevent to leakage, no thats why the walls are sealed before the tile, it is enevitable that water will enter behind the tile in some small amounts. and move down to the pan. True they make caulking in every color that they make grout in, and should absolutly be used. but this does not take away from he fact that there is no possible way to keep water from getting under the tile level on a tile bottom shower floor. liners are not there incase the tile fails, its a working part of the shower system. and in this system (the cracks around the corners) there is an eco-system that is perfect for mold and mildew to survive, and spore out into the rest of your home continuously. cultured marble bases removes this continuous dampness, as well as having a standard flange that can be easily changed/worked on in case of any cause. Cultured marble pans are flanged on top, come in stardard sizes up to 4x5 feet, then you could build a bench all the way around the outside of that for a party shower. If you use cultured walls as well, corners are siliconed in, as well as a second sealed corner trim strip. so leakage is an impossibility, so is moisture retention. Recesses, and shelving no problem, even adding them later. smooth single no seamed surfaces are easy to clean and no maintainance. I make money if I do the tile, when I do bathroom remodels, I use outside contractor if they want the cultured marble and I make nothing for that. Facts are facts, I want my clients to get what they want, and what they need is info to make thier own decisions. Other people have said clean and dry your shower after use, I say what are they thinking. I want a VERY low maintainance place to get clean, not a place where I have to do maintainance every night, I wont dry me and the shower after every use. There is still the water in the cracks that you simply cannot get to to dry, along the bottom of the wall to floor seam. if you use the cultured marble base , and tile walls, you will have no worries as well, the possible problem is in the tile floor base.

@tendrac, there is only one dealer in my area that does any type of solid surface for showers. Luckily, it's only 45 mins from me so we went with them. We didn't get any other quotes. Our builder has had other clients use it before and really liked the material and quality of the Onyx Collection. The materials alone (shower plus corner bench and alcove) ran about $3600 and it was $1500 to install. That said, I was shocked when I got the final install price. Our builder had one of his subs install it and I was onsite for most of it. It took about four hours for two guys. They did REALLY well on our job :insert eye roll:. There are YouTube videos on how to install it but we didn't have the time or the tenacity at that point to attempt it nor did we want the liability if it went totally wrong ;) Our panels are 7 ft tall.