Pictures would help.

You did a fantastic job on your first big project, the worry factor is often the biggest obstacle, and proper research helps to overcome this issue...you did great asking the right questions and perhaps you are well on your way to becoming a seasoned weekend refinisher. There is a great sense of satisfaction in being able to "resurrect" old furniture pieces, many can been had cheaply because they're so ughhh! So here are a few extra hints to helps with the next project... 1). Use the powerful, nasty strippers, with methylene chloride, they just get the job done so much better than citrus strippers...gloves n goggles n good ventilation are important, you will love the fast results, use a green scotchbrite pad, rough steel wool, a stiff brush, etc. 2).strip the whole piece, never mind taping off areas unless the finish is pristine...chances are you will been able to do a much nicer job if you take the whole piece down to bare, especially once you learn how to seal, glaze n tone....shellac n stain powders/glazes are your friends... 3).automotive dewaxers are great, like ditzler/ppg # dx330....a big helps in cleaning up after stripping n neutralizing....helps to avoid contaminants like fisheye"silicone" and lets your get a look at the grain and possible spots, problem areas before your stain or seal the piece. 4).while your can always re-strip, sand or undo your work, try to think ahead and prepare...ie, test stain/finish underneath a tabletop first, dont stain or finish in the sun or winds at 90 degrees, read up , but only from truly problem sources, like mike dresdner, etc.. 4).have fun and dont be afraid, we all had to learn to walk and talk. There is great satisfaction in learning how to finish/refinish....drying times, dust free and stain/finish compatibility are the biggies, so dont worry, ask a lot of ??? And dont believe everything your hear.... 5).cheers, holla at me if ya want...veryspecialprojects@gmail.com....I only have three decades of finishing wood under my belt, but I'll try to help if I can....aloha

I like the shape but agree that it could use a little love. For example, the leather is peeling in the corner. Based on my experience with leather topped tables I would recommend coasters under drinks and a tablecloth or place mats made from something less absorbent than cloth if your family members aren't messy eaters. Well protected leather is very sturdy and easy to clean but sweating glasses can leave water rings on it and other things can damage it.

This is a lovely mirror from Ballard’s that I think compliments the glass door feature on the console: https://www.ballarddesigns.com/san-marco-vertical-mirror/mirrors-art/mirrors/wall-mirrors/446826?listIndex=5&uniqueId=446826&isNewProduct=false I do think it could work with this hardware you posted … I like how it repeats the curves on top of the mirror: I think it could also work with the mirror you posted: