If you think the California Faucet's matte white finish would be an improvement over the current bonnet cap and possibly blend, then I wouldn't hesitate to contact them and ask what it would cost to have them repaint one of the replacement bonnet cap pieces you received with their matte white. I'm not sure how they operate: if they do one-offs with their coatings or if you would need to wait for a production run of other matte white pieces. For example, with my kitchen renovation, I ordered some Belfer recessed light fixtures, and the manufacturing system involved powder coating per piece. Normally the turnaround time would have been a few weeks for that, as they sent pieces to the powder coating contractor only as they were ordered by customers, but the powder coating schedule had been slowed down by pandemic restrictions, so it took about 4 months for me to get them. That's why I mentioned sending one of the replacement bonnet caps you have so you can still use the faucet in case it takes a while for the coating. Brizo doesn't actually use powder coating to apply its finishes. Its process is more robust, but I wouldn't be surprised if California Finishes has a process that is less technical being a smaller company and with some of the finish flaking problems I have read about with them. The bonnet cap is likely to be more protected than other parts of the faucet, however, so as long as the plumber can get it replaced without damaging anything else, it might be worth a try to see what California Faucets could do for you. Another thing to keep in mind is that you've only had this faucet for a few months, and I've read so many reviews about Delta's and Brizo's touch technology faucets failing after a relatively short time that I might be hesitant to drop money into a custom paint of the bonnet cap. A popular product on some of the older Houzz posts, especially way back when people were posting under the website GardenWeb before it merged, was a third-party foot lever that turned a faucet on and off. People back then loved this! While I think products like that still exist, they have been largely made obsolete by built-in touch technologies. Just be aware that the faucet may not last as long as it would otherwise without the smart touch feature. Yes, Delta/Brizo will probably send a replacement part to fix it if it malfunctions, just as has already been mentioned in this thread, but at some point you may want to evaluate whether you would like to continue paying a plumber to repair a faucet on which you may or may not have been able to resolve the color discrepancy. My Brizo faucets have regular handles without touch features, a decision I made after reading touch technology reviews, and I have become adept at operating them with a thumb or pinky finger in order to minimize contact with wet hands. I also use a sponge to wipe down any water that gets around and on the faucets after each kitchen session. There may be no going backward for someone who has used and likes touch technology, but if you do need to make another kitchen faucet decision in the future, you may want to do more searching at that time to see whether the longevity of touch technology products has improved. Looking again at Jason Wu for Brizo products online, it seems to me that you can almost see that darker finish on the bonnet cap in the promo photos. I don't know if that's just shadow or if it is a paint defect in the prototypes. Whatever the case, it's a terminal aesthetic flaw in the faucet. I'm sure plenty of people have called in about this problem before. It is frustrating that Brizo hasn't taken steps to fix it since it's just that one piece on the faucet, apparently. I'm so sorry you are dealing with this. If you do find a solution, you might want to start a new post for "Jason Wu faucet color defect" here at Houzz with some photos to make it easier for other people with the same problem to find out what to do.

Thank you everyone. I really appreciate it. I’ve checked many of the websites you have all advised, and all of the gold finish faucets are out of stock. I’m struggling to find a faucet. I did find a Kraus, however, it’s really tall and you can pull it down into the sink. All of the reviews complained of how water flies everywhere due to not being able to pull it down deeper in the sink. I want to truly be able to use it, so that won’t work for us. It’s $350 so I’m not going to buy it just to have a faucet. I’ll keep looking.

for some reason, not all the top knobs "honey bronze" are the same color for the different styles, which is super frustrating. Some styles are closer to the brizo luxe gold and others look more like a real "gold". Like the bar pull that I wanted is more gold rather than the color that brizo luxe gold is, unfortunately. order the exact hardware style you want in that color and see if it's a match. another thread is warning about this. good thing is that the photos on the website seem to show a difference in color and as long as the actual product looks that color, you may be able to differentiate on the website before ordering

@mhsperz I apologize I didn’t realize you had asked about the Odin. I’m sorry the response is so late. I returned the Odin because Brizo kept sending me faucet replacements that had inconsistent finish but would refuse to acknowledge that it looked bad. The rep from the retailer agreed with me that it was poor quality but Brizo simple said that it looked the way it should (looked inconsistent compared to every display model I saw of that finish) so I gave up and got the cheaper delta faucet. It works fine but I personally think the spray is too small and therefore too strong at times and hard to control/adjust. It sprays everywhere. I would have preferred a wider spray that could be controlled better in strength. I know it’s probably too late but I hope my comments are helpful for someone. :)