Would look better with the third sconce in the middle.

I’d prefer 3 sconces. Better light coverage, too.

Would look better and also function better, as without that central sconce, you're going to be getting ready with the effect of side-angled light.

Let's see a picture pls

You could have three sconces whether you have two mirrors or one very wide one.

However, if you install the middle light on the mirror in the middle, the side lights would look better installed on the mirror as well.

It is a marvelous, very custom and sophisticated look.

The electrician really needs to know what he is doing and measure exactly.

Once the hole is cut in the mirror, it cannot be patched, and they all need to match.

Because of where the sconces are hung -- slightly over the sink's bowl -- it may not practical to center a mirror over each sink -- that would be a very narrow mirror. On the other hand, if you truly want multiple mirrors, could use two narrow mirrors and a centered third larger one,

or you can hang the mirrors underneath the sconces ... but the symmetry likely would still be off unless you do add that third sconce centered above the mirror.

My preference: invest in a mirror that is as wide as the vanity countertop and as high as the top of the sconces and have either the shape of the sconce base against the wall professionally cut out of each top corner ... or at least a hole for the wiring so the light can be hung atop the mirror professionally cut out of each top corner.

Yeah, the way the spacing is, there's not room for a third sconce without leaving yourself with slivers for mirrors. One large one, and prepare to use the sink at different times or fight over the real estate in the middle. :))

One large mirror from bottom of light fixtures to top of counter or

one huge mirror from top of counter to ceiling with holes cut out for light fixtures - which I don't think will work because the fixture is so close to the wall.

I see no 3" backsplash on back, but it's on the side? is this correct.

Obviously, this wasn't planned quite right, but i'm sure you can fix.

@Angel 18432 I think the backsplash for the back is laying across the sinks

kw, yes I see it now. I think I would not put that on and remove the right side.

Thanks for all of your opinions everyone. I appreciate your time!

We have a 60” vanity and I can’t imagine how three sconces could fit. We’re doing one large custom mirror with cutouts for sconce junction boxes about 5” from the edge. I played around with a 1500 lumen plug-in light I had and to me there is plenty of illumination coming from both sides at that distance.

So do a large mirror, trimmed on all sides, painted white.

kind of like this.

Maybe get a large lighted mirror ( with leds around the edges) to eliminate the sconces that are squooshed in there and limit the size of your mirror. It will give you beautiful even illumination around your face and I think it would look better. enjoy your new bathroom!