ugh.... we are just at this point now and realized that our new counter/breakfast bar is 12' with the sink cutout dead center. My wife is stuck on an undermount and we really wanted granite... we will, of course, be getting a few fabricators to bid it. But is it feasible to do the seam with a cutout at the seam? The front edge of the sink seems a bit vulnerable to me. Also the current layout has the dishwasher adjacent to the sink and I guess we'd need to get the cabinet built with a support at the seam. If we can seam at the sink it would be small, just the length of the front setback (breakfast bar transitions to countertop there)... how well does the bullnose normally line up on a seam? Do they polish it on-site? Are we better off getting used to NOT granite? The 12' counter is not negotiable in our design.

That is not good. Have you paid yet? Talked to your installer? A professional should be able to come back and make that look better. At the bare minimum they should be able to match the color and get rid of the glue mess.

Has anyone used CityQuartz for quartz countertops? Good or Bad? Where does it fall in the spectrum of good quality and poor quality for quartz countertops? How much would a reasonable price per square footage be? Thank you!!

It's better if you find a smaller fabricator with proper licenses and insurance. Don't go with big box stores but also make sure not to do business with contractors or freelancer shops who cut quartz in their driveway, yard or a garage. Check the reviews, ask to see some of the work they already did, and that should be enough to make you certain that you're doing the job with the real professionals. And now you can say that you can be certain how a seam should not look like.