As far as solar panels, there was a discussion here last winter/ spring on heating and powering a greenhouse with solar panels. Those that contributed to the discussion provided a ton of info, maybe do a search for that discussion Good luck! David Here is a link that might be useful: My blog with greenhouse pics and info

The Husky's in comparable models are not more expensive that the Stihls. In fact I think the comparable Husky's are slightly cheaper than the Stihls, at least in the pro saw market. As a comparison, the Husky 346xp is $420 at Baileys, and I think the equivalent MS260 is ~$500. If you are cutting that much wood you might want to consider a Stihl 361. It seems to be a great all arounder of pro quality. It can handle an 18" bar and I think it could also do 20" but if I remember, not beyond that. If you don't go pro quality, the 250 is okay but maybe you would appreciate a little more power with all your cutting. I think the 280 and 290 would fit that. Of course they will be a little heavier than the 250. I also have a 250 that I am about to sell. It is a decent limbing saw but I wouldn't want an 18" bar on it. 16 seemed to fit it nicely. I just replaced it with a MS026 Pro (older 260) this weekend. Unfortunately I have not yet had a chance to try it out. I have not heard much about the differences between German and US built Stihls. It does not come up in topic very often. The used market can save you quite a bit. I personally do not trust ebay so I look through craigslist so I can see the item in person.

No wonder you are confused. My head was spinning after reading all of the opinions! I was following the original post, but this is my first look at your follow-up. I agree with the others about finding another shade for first lamp if you decide to use it. The present shade is too short and it is the wrong style. My suggestion would be to take the lamp into a lighting store that sells shades. There you will have some expert advice as well as the option to "try on" various shades, much in the same way that you would try on clothes to determine the most flattering fit and combination. Think of the gas you will save! These are some guidelines for shades that I have found useful: 1. Match the base  think size, shape, style, color. Your goal is to match the mood of the base. 2. Compliment the base  the shade should make the base look better without competing with for attention (like that patterned shade on the metal lamp) 3. Hide the switch  the shade should just barely cover the switch (usually the height of harp + ½ inch). Try different sized harps, or add a shade riser to fine-tune. 4. Sizing Rules of Thumb: (1) Shade height should be about ¾ the height of the base (2) Bottom of shade should be wider than widest part of the base. (3) Shade width should be approximately equal the height from bottom lamp base to the top of the lamp stem, (just below the socket cap) I like both lamps. I think either one will be beautiful, but I would not use both of them in that room. Rather than another ginger jar, it would be nice to use a different architectural form on the console. I like the console very much. I do not like the metal/glass (marble?) lamp with the patterned shade. I would look for gorgeous buffet lamps. I am thinking wooden with an antique gold finish (very simple, but elegant). These are high end lamps, but use as examples. If you want the console to appear more sophisticated, remove the dried flower wreath that is resting on the books below, and remove the wicker basket with the greens from the top of the console. Replace it with a grouping of three (the magic number) similar objects (candles, boxes, ceramics, etc.) of different height and proportion. Good luck and keep up the good work. I am amazed by your shopping energy and resourcefulness.

Disappointedly, I passed on the bench/sliding ottomans in the above post due to the cost of over $4200 in the lowest grade leather. However, because I’d had other ideas, I went back to one of those very quickly. The EA Ferri ottomans. But allow me to back up, please. When our church went through a major restoration in 2014, the design team updated some details around the doors, and I was totally inspired by the color palette. I still am. Please click on this photo to see all of the different colors: As I built a portfolio to redesign my family room, l found two continuous “themes." I wanted this color palette plus black, and I wanted an off-white sofa. Unfortunately, I gave into the fear that it would make my family feel they couldn’t relax in the room, and, after two years of debating, I finally chose a tweed that worked. I’ve regretted it every day. But gradually I am getting closer to the “feel” of the room I wanted. Before I could finish the room, I sold my house and moved into a temporary apartment. “Temporary” may well stretch into several years, and I need to feel good in this space. One thing that has worked in my favor is the off-white porcelain tile floor in the large open plan. And I’m so pleased that I waited until I found an area rug that warms up the room with texture but stayed with my desired color palette. Here’s what has surprised me most recently: On the EA floor sample sale were two Ferri ottomans which I asked my designer to bring to my home so we could get an idea of what direction to take. We both really liked the addition of linen-like texture, as opposed to another leather [which I’d planned for practical reasons.] We both liked the way the off-white fabric lightened the room. Knowing that I can choose to have them reupholstered very easily since it only involves the cushions, I chose to purchase them. And I’m another step closer to my original intention. I brought out more of my white and off-white accessories, and put away what most people consider to be “color.” This feels right to me, so now I can better convey that to all of you. I know that most advised me in an earlier design dilemma to add color. Please don’t worry. I can add more colorful accents at any time, and I will do that seasonally. Next I'll be searching for a 42”w x 18”d x 18”h coffee table with a glass top and metal base in oil rubbed bronze. This size seems best for the room, and I can choose to configure it with the two ottomans to form a large rectangle (42”w x 36”d x 18”h) when the ottomans are not in use. They also look nice along the wall across from the sofa, but for now I will use them as my “coffee table.” That has allowed me to remove the current coffee table and re-visualize the room. While looking for the coffee table, I need to decide on the drapery panels. The only reason I want them is to break up the mismatch of colors--the wood-colored blinds and the taupe walls--neither of which I can change due to the fact that I’m renting in a brand new complex. I’d like them to pick up the main color of the area rug. I’ve been watching for a PB sale. PB offers ivory in the 108” length that I need. (So does RH, but even on sale, they are too costly, I think.) It is essential to me that they hang very straight. No flare. Just barely touching the floor...and yes, start above the actual window height by about 9-10”...ceilings are 10' so I can make 108” work. I think I need to have a professional hang them for me. It is hard to spend a lot of money on window treatments for a temporary space, but I want this place to look and feel great while I’m here. Most if not all of the pieces I’ve chosen will work in my next home. But drapery panels...well, it’s harder to justify the cost. Watching for just the right sale. Any tips will be welcome! Thank you for your continued input and support.