I am still stuck on mixing metal finishes in open concept homes
ontariomom
3 years ago
last modified: 3 years ago
Featured Answer
Comments (15)
ontariomom
3 years agoRelated Discussions
Choosing/combining finishes and fixtures in an open concept home
Comments (17)jlc712: Thanks for taking the time to give me so many ideas to think through. I have already decided to nix sconce S1 and replace with s2b (so I will be repeating that sconce in three locations total). I would not want to repeat it everywhere -- I need more variety than that. P1 that you suggested leaving was chosen because we felt it would go very well and compete in size with the big island hood. However, the idea of three school house sconces in the kitchen is worth exploring more. I am not sure how large the school house sconces comes in. If it is to replace P1 and go over the island it will need to be large. I will research this more. As per too many finishes that you and others have mentioned, I am using the blog attached below as my guideline. I like the idea of using more than one finish and feel the designer/blog author does a good job of explaining how to mix metals. As per too many styles, that may be a problem. I have tried to choose only lights listed as transitional, but atlas that is a broad category. I have also endeavor to repeat other features (stripes, circles, drums etc) to connect the lights. Could be some more work is needed in this area. Oaktown, Thanks for your help and inspiration pictures. I appreciate you thinking through the lighting with me. We will definitely have some pot lights too (probably more than I would have liked). Pot lights are very unflattering light when shinned on a head, so we are trying to avoid having pot lights over head in any seating areas. You mentioned eliminating the foyer sconces (S2) due to it being close to a closet. There is no closet there, just a very, very narrow niche that we will use for wicker baskets maybe to hold a few purses, umbrellas etc. There is no door on it, so I think the sconces can stay. Our house is a rebuild/addition and previously we just had a large hanging light in the foyer. I know from living in the house with one large hanging overhead light that the light in the foyer was insufficient. I am looking forward to seeing if the sconces will improve the lighting in the foyer. Your inspiration photos are gorgeous. Is the Hicks light from Circa? We chose one sconce light from Circa, but I will take another look at what they offer. Most of our chosen lights are from Hudson Valley or Elk. As per my kitchen cabinet colours, the perimeter cabinets are off white (SW Alabaster) and the island is a dark stained chocolate brown. The blue cabinets that you are correctly associating with my username are going in the laundry room (good memory BTW). Carol Here is a link that might be useful: mixing metal finishes...See MorePlease help me choose light fixtures open concept space
Comments (13)A floor plan will really help. It will let us see what lights you can see from where. Is your faucet and your hardware both chrome? and your door handles the dark finish. I can't tell if it is antique brass or not? What is your DR chandy - is it brass? You need to figure out, if you are following the article that you posted what category each of the above elements fall into. (the faucet, hardware, etc.) My feeling is that you have already mixed your metals. For example - in the kitchen you have chrome hardware/faucet (step 1). Step 2 would indicate picking a matching metal which you did with the island light and either of the window lights. (I prefer A2 as it adds another element - the white glass shade - into the mix while retaining the metal. Where I am bogging down is in the transition areas between the rooms which is why a floorplan would be helpful. For the foyer/LR I would pick H2 and J1 but that is subject to change depending on the floorplan and how the rooms are connected. Edited to add: Don't forget, unlike a bathroom, a kitchen comes with other metals. What are your appliances, pots/pans, cutlery. What are your plans for your stools - any metal there? In your foyer, LR and GR - does any of the furniture have any metal in them and if so - what type. Are any of your accessories metal. How about your backsplash. This thought and question was triggered while I was just in my kitchen and happened to notice my copper backsplash which is behind and underneath my stainless steel range and vent. My hardware and faucets are brushed nickel while my lights in the eating area and family room are aged bronze. My pendants are a mix of the two and act as a transition. I treated each `area of the house as a separate area. Kitchen/eating area/family room is one area while the DR and LR was treated as a separate area. Because the Kitchen/eating area/family room had a mix of metals I felt comfortable using either of those 2 metals in other rooms. The copper backsplash was my jumping off point for using copper in a variety of accessories throughout the house.. So, 3 metals throughout the house. This post was edited by blfenton on Wed, Nov 5, 14 at 18:30...See MoreRefrigerator in small open concept town home
Comments (33)Be careful though - the doors must stick out past the surrounding panels/cabinets/counters to allow the doors to open fully and to allow the interior drawers to not only open fully, but also be removed for cleaning. For counter-depth refrigerators, it's just the box/carcass of the refrigerator that is "hidden"; the doors (and handles) need to stick out. So, as RococoGurl mentioned, carefully measure the alcove. Most CD refrigerators are around 36" wide x 70" or so tall - if your alcove isn't at least that wide x tall, your selection will be limited (especially in the mainstream manufacturers). So, you need to check the specs of your chosen refrigerator and determine what you need: The width of the opening = at least the width of the refrigerator + whatever is needed for air circulation on the sides Height of opening = at least the height of the refrigerator + whatever is needed for air circulation on the top...See MoreClosing up my small, open concept home.
Comments (12)I can see why something is neccessary to delineate the space, but not want to reduce the floorspace. A question to ask could be how thin any construction could be. This might help with any decisions. It might be worth exploring custom options to fit a full floor to ceiling screen located as I drew out above and exploring materials - maybe frosted glass ? wooden floor to ceiling slats with glazing between? or another material between? or just slats set at an angle ? or slats that can have the angle adjusted so they can be 'open' for light to travel, or 'closed' to obscure the sight line, or partially opened? It could be a combination 1/2 wall with glazing above or slats. Another option might be to consider not having an island and placing the 'wall' at the lounge edge of the island bench so the kitchen becomes a galley style so only the dining space and bench with the stove is visable....See Moreontariomom
3 years agoRower 76
3 years agoontariomom
3 years agoontariomom
3 years agolucky998877
3 years agoontariomom
3 years agoontariomom
3 years ago
Related Stories
HOUZZ TOURSMy Houzz: Warm Walnut Rules in an Open-Concept Canadian Home
Traditional takes a turn for the modern in this remodeled St. John's home, newly focused on clean lines and sleek finishes
Full StoryKITCHEN DESIGNHow to Mix Metal Finishes in the Kitchen
Leave matchy-matchy to the catalogs and let your kitchen's personality shine with a mix of metals for hardware and fixtures
Full StoryBATHROOM DESIGNHow to Mix Metal Finishes in the Bathroom
Make a clean break with one-dimensional bathroom finishes by pairing nickel, silver and bronze hardware and fixtures
Full StoryHOUZZ TOURSMy Houzz: Creative Open-Concept Home in Toronto
Three young designers give a neglected boardinghouse in Canada new life with an industrial-modern makeover
Full StoryKITCHEN OF THE WEEKKitchen of the Week: A Soothing Gray-and-White Open Concept
A smart redesign gives an active family a modern kitchen with soft tones, natural elements and mixed metals
Full StoryREMODELING GUIDESHome Styles: Why Postmodernism Still Matters
Playful mix of history and irony helped pave the way for today's headline-making buildings
Full StoryFURNITUREHow to Mix Wood Furniture Finishes
Furniture doesn't need to match to look good; add character and charm to your home with mismatched — but complementary — tones
Full StoryKITCHEN DESIGNNew This Week: 5 Gorgeous Kitchens That Expertly Mix Finishes
See how coordinating and contrasting metals can lead to a beautifully finished kitchen
Full StoryKITCHEN DESIGN5 Compelling Reasons to Mix Metals in the Kitchen
A winning combination of metallic finishes can enhance kitchen styles from historical to contemporary
Full StoryKITCHEN DESIGNKitchen of the Week: A Mix of Textures, Metals and High Contrast
You’d never guess the kitchen in this 1930s Florida home was new, which was exactly what the homeowner wanted
Full Story
ontariomomOriginal Author