@Kristin S, not sure but I can certainly ask. I really need a middle ground between the Polished Brass and Satin Nickel. The Polished Brass seems too gold for me and the satinnickel slightly too muted. Hard to tell but is the Top Bronze kind of in between? Going to go online and see the difference. At the end of the day, the pulls are so subtle so maybe I should stop belabouring on this point and I guess I could always just change them out after the fact (although my husband would kill me!!) ... LOL. Thanks!!

I had satin nickel hardware in my kitchen before and was really hoping to do something different, which is why I was considering a matte black or gold option. What about doing satin nickel for the faucet and light fixtures and hardware either gold or black?

You could do it w/a jigsaw. (borrow or rent one if you don't have one) These are some DIY links that will walk you through it. Grab a friend w/a bit more know-how if you don't think you can manage. (or, you can always pay a pro to do it. ) DIY all you have to do is go to a glass shop and give them the measurements of the cut piece you'll need. try seeded glass. then you silicone the glass on the back and hold in place w/glass clips. https://www.familyhandyman.com/project/convert-wood-cabinet-doors-to-glass/ a few more how-to's https://www.confessionsofaserialdiyer.com/how-to-add-glass-to-cabinet-doors/ https://providenthomedesign.com/2014/03/03/diy-glass-cabinet-door/ This one is very detailed: https://simplyrooms.wordpress.com/2012/09/23/project-converting-cabinet-doors-to-glass/ you may need some more tools for this since you are keeping the real wood. you'll have to finish off the edges after cutting. not difficult, just another step. for a few hundrend, you could prob get a cabinet guy to do it all for you.

Neither. ( Follow to the end, if you can ) The Brizo Odin in Stainless ( satin nickel ) is not boring, it works perfectly great with the s.s hardware and your s.s. appliances and you just stated you do not want a brass toned faucet. You want the brass tone in your lighting. You really don't need three finishes in the kitchen. ( exception at end of my post ) If you absolutely can't live with that? Do the chrome. Polished Nickel will be a pain and will take on a far warmer , greener cast you really don't want with the hardware and it isn't great with the brass you want in lighting, either. Also will spot far more. I don't love the knurled pull with the EDGE pull. ...sorry. Something sleeker - a closed end D pull would be better. Better yet is repeat the edge on the integrated appliances and pantry https://www.perigold.com/kitchen/pdp/alno-inc-tap-pull-18-center-to-center-appliance-pull-qal1975.html?piid=11295412 !8 inches, s.s Maybe you are thinking the kitchen is feeling a bit flat and cool? If that is the case....maybe a bit of black instead of brass in lighting and switch up the faucet to black ? Change the hardware to warm brass : ) Why? When the third finish in a kitchen IS black? It feels more intentional and at the same time less competitive among similar finishes. Perhaps warm brass on the cabinet hardware.......SS Appliances, and.....black for the faucet , or a black with just a dab of brass: ) A bit more black/brass in lighting where the combination is plentiful Brizo black w/luxe gold.... By now, you have figured out I do feel the kitchen might feel just a tad.....flat. Needing a little jolt of higher contrast: ) jmho.