Hey thanks for responding! I guess I’m also concerned about a pure white colored trim making the AW look more yellow. Was thinking about trying something in between the AW and pure white window. Anyone ever use Snowbound? It’s a little whiter than AW.

RHM, I will admit that I am fussier than most about my whites. You say you want to brighten up the walls, so my first question would be "what color are your walls now?" Your trim is Alabaster - a light white that is slightly dirty with a little gray green cast, Your cabinets are somewhere between Alabaster and Dover White. If you measure the light, chroma and hue of Dover White vs Alabaster the biggest difference is the Chroma - how gray is it vs how colorful is it. Dover White is less gray so the so the color looks like it is a bit darker and does not have that slight green cast. The first number is light - So Simply white is the lightest color The second number is the chroma - the lower the chroma the more gray , the higher the chroma the more color. The third number is the hue 90 is yellow, 182 is green - this comparison gets tricky because yellow gets kind of olivish green as it goes to gray and when the chroma is really low, like in alabaster I can see that hint of green. Dover White CIE-L*Ch(ab) = 93.765 8.230 99.280° Alabaster CIE-L*Ch(ab) = 93.002 5.636 99.953° Simply White CIE-L*Ch(ab) = 95.648 4.657 106.615° Personally, the first two colors I would test are Dover White and Neutral Ground. I think Neutral Ground is a bit too dark, but I like a little contrast between the wall color and trim color, so I may do 3/4 Dover white and 1/4 Neutral Ground. How I test and blend colors to get exactly what I want is really simple. I own a box of oral medicine syringes - you can buy them from Amazon. When I find two colors that I like, but really want the color to be something in between I mix several variations of the two colors and paint them on 8 1/2 x 11 240lb water color paper. 1 cc of color A + 3 cc of color B 1 cc of color A + 2 cc of color B 2 cc of color A + 2 cc of color B 2 cc of color A + 1 cc of color B 3 cc of color A + 1 cc of color B I mark each sheet with the "recipe" and then test the colors against the colors I already have in my space.

Hello, we moved into our newly constructed house a few months ago. The walls and trim are in different sheens of SW Alabaster. The ceiling is a mix of Alabaster and regular white ceiling paint.

You need to test both in your space and your lighting that is the only way to do this.