How to fill in these alcoves?
4 years ago
Featured Answer
Sort by:Oldest
Comments (16)
- 4 years ago
- 4 years agolast modified: 4 years ago
Related Discussions
alcove vanity-walls not square-how to fill the gap?
Comments (5)Ha, I just dealt with this (although mine is in a corner, not an alcove.) What a pain! We had a top made for us out of quartzite (like marble) and while I patterned the vanity perfectly, I assumed the corner it sat in would be square. It was NOT. I had planned to tile the wall first, then install the vanity and caulk the edges. What we ended up doing was basically what the kitchen counter granite installers do: We cut into the drywall, just a notch the size of the countertop, and slid the protruding corner into the notch. Then tiled down to the counter (rather than behind it) like a kitchen counter. So that's one option for you: get your granite counter cut larger and recess the front. But WAIT!!! You haven't had the granite cut yet? Why not just template the exact space and get the granite cut to fit perfectly? Otherwise, are you planning to tile the walls around the alcove? a) you could choose fat tile, which would cover the caulk line or gap. b) even if you choose thin tile, only 1/8" of your 1/4" caulked gap will show under the tile :)...See MoreHow would you fill the fill around the MW?
Comments (10)Don't forget that MWs need venting room all the way around them for safe operation. Don't restrict that and create a safety hazard for the sake of looks! Check those specs. I'll think you'll find that 2" of space all the way around is needed by most. Some countertop MW manufacturers have MWs with "trim kits" designed to surround the MW and create proper venting at the same time. GE for one. If you want a built in look, look at the specs for those MWs and the trim kits and give those specs to your KD and cabinet maker. I think you'll find you have very little actual usable room left over after a trim kit is installed. They usually fit a 30" framed cabinet. Since you have inset, I think you'll have around 5" left over for "something"....See MoreHow to get cast iron tub into alcove?
Comments (14)Let me guess: no plumber, no engineer, no permit, no workman's comp. and you don't want to rent equipment that will allow someone do move the tub safely. Make sure the people that carry it are closely related to you and have good health insurance because your homeowners insurance will probably not cover it. The plywood should not be the issue. The tub feet should rest on full strength joists or solid blocking between those joists. If the hoists do not meet the loading requirement you need to add new joists or sister the old ones. If you don't know how to do that you need to find someone who does. It's usually cheaper to do something right the first time. This is a good project for a DIY forum. Here is a link that might be useful: DIY forum...See MoreHow to place a tub in a tight alcove?
Comments (2)Opening up one or the other of the alcove end walls and knocking a stud or two out of the way is going to the easiest way, IMO. And least likely way to get it in there undamaged. Just no wiggle room trying to go thru the door, no room for anyone + tub, and no guarantee that the framing isn't wonky and that you have even less room than you think. OTOH, wonky framing could go the other way and you have a bit more room than you think. But you want to take it in, dry fit, remove and take it back in... I would go thru the wall. Ends up being less drywall removed that way vs removing it from the walls inside the bathroom....See More- 4 years ago
- 4 years ago
- 4 years ago
- 4 years agolast modified: 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
Related Stories
HOUZZ TOURSMy Houzz: A Home Filled With Warm Memories of Travel
Antiques and pictures from a photographer’s world travels add character to her Northern California residence
Full StoryREMODELING GUIDESHouzz Tour: A Light-Filled Paris Studio Redesigned for Living
An architect reconfigures rooms and brings sunlight into a furniture restorer and trapeze artist’s window-lined home
Full StoryLIVING ROOMS10 Fresh Ideas for Your Fireplace Alcoves
Not sure how to make use of the space on either side of your chimney? Check out these alternatives to the standard built-in bookcase
Full StoryLIVING ROOMSWhat to Do With Your Fireplace Alcoves
Interesting alternatives to built-in shelves and cabinets will make your living room stand out
Full StoryHOMES AROUND THE WORLDA Dreamy, Light-Filled Home in Stockholm
Creating a warm, vintage-inspired space requires planning. These Swedish creatives got it right in their cozy apartment
Full StoryHOUZZ TOURSHouzz Tour: A New Layout Opens an Art-Filled Ranch House
Extensive renovations give a closed-off Texas home pleasing flow, higher ceilings and new sources of natural light
Full StoryBEDROOMSRoom of the Day: A Light-Filled Bedroom Looks to Marrakech
Memories of Morocco inspire a master bedroom redesign in Philadelphia
Full StoryENTERTAININGTrending: The Most Popular New Home Bars of Summer 2018
Whether alcove, niche or full lounge, these hardworking spaces make it easy for hosts to serve their guests
Full StoryARTTake a Tour of Europe in a Single California House
Miniature buildings, landscape art and architectural prints spanning centuries and countries fill the home of two amazing architects
Full StoryHOUZZ TOURSMy Houzz: A Seattle Cottage With Decades of Memories
A lifetime of experiences and adventures makes for a home filled with color, meaning and stories
Full Story
cawaps