Funny that you guys started to discuss this just when I am about to start this same project myself. Here are my findings. First off, if you plan of putting a counter on top of the new 3.8 cu ft FL, good luck, and have your pocket book ready. You see, the deepest "standard" counters are those for kitchens, at 25 1/8". Assuming that one leaves around 5" of clearance behind those newer FL machines for vents, air circulation, heat, etc, then you are looking at about 30"-35" of depth, depending on how flush you want the counter to come to the front of the machine. Having said that, there are 3 prices for laminate counters in the stores (like Home Depot). The counters you see in the store in stock are the cheapest, and will cost around $10 li ft. If you need to pick a finish that matches say the sink counter top in your bathroom where the machines are also located, then that is considered a custom order, even if it is a standard depth. This will easily double the price to $20 li ft. Now if you want to order a non-standard depth so that it goes from the back of the wall to the front of your new FL, then you are looking at $35-$50 li ft, depending on type of finish like rounded vs sqaure front edge, back ledge or no ledge, etc... Keep this in mind when shopping for a counter top. I would like my counter to cover the machines completely, so I might have to bite the bullet and order the more expensive counter top.... Again, I am talking about a laminate counter top, no fancy materials here.... I am from Canada, and here is what the local Home Depot quoted me in Canadian dollars for the 3 options.. 1) In-Store counter (limited finishes) 25 1/8" (standard depth) X 6 feet = $68 CAD Custom order counter (you choose the finish) 25 1/8" (standard depth) X 6 feet = $132 - $150 CAD 30 Csutom order counter (you choose the finish) 30-35" (non standard depth) X 6 feet = $222 CAD I believe the last option of non-standard depth only allows for a square front edge finish. If you want a rounder edge in front, like that found on your kitchen counter, the price jumps to $500 CAD, since the guy said that they have to charge for a full 4X8 sheet, and then cut the custom size from there, in order to get the rounded front edge... One other option you can do, which my brother did very nicely is lay down 2 sheets of plywood (for extra thickness), and tile the top and sides, looks really nice, but is a lot more work...

Well, I've been collecting plates, saucers, and cups for a couple of years now.. and have a great collection. I guess the hard thing is to decide how to put it all together for a backsplash..The ones I've seen on here are awesome! As for the rounds from tree,I think it's all going to firewood... might save a couple... our tree man says they attract termites and other bugs if left out... Also, when we thought we had to evacuate (you all will laugh at what I took) the only things I could think of that were really valuable to me were my stained glass lamp and hanging hummingbird that my sister made for me that would have been destroyed had the tree come down on our bedroom..

we are just finishing a 2-level peninsula similar to your plan. will post pictures soon. we were well aware that this is "off trend" but figured that by the time the kitchen is finished, it will be almost back "on trend" again! you just have to go with what you need to function best. hiding all the s*#% (stuff) from the dining area was big for us. we also really enjoy sitting at a counter. my husband makes pasta a lot and likes the idea of having 2 levels-- one to work on, and one to dry the pasta on. we put outlets all along the 6in. support, as you had mentioned above. we also put one outlet facing toward the bar side (also in the support) which i think will be handy. i also had an idea (after the fact) to build in a little soap/sponge holder into the 6inch support right by the sink. it would have been nice. ah, well. next kitchen. as mentioned and shown above, we also used hidden brackets for support. they are routed into the side so the face piece went over them and then the under-counter part of the bracket does not show at all. we didn't have room for the corner bar section that you show in the last picture. i like the look-- it does seem to update the bar look-- but don't know how it would work for your situation. have fun! kawh

Heatheron40, very nice. I asked a question about doing a tile countertop in our guest cabin recently as I feel like the look would complement the cabin aesthetic. Also I’m dying to learn to tile and thought it would be a fun place to start as it’s not an everyday space and I could take my time. Most of the responses were against. Basically stating the grout would make me crazy. The guy at the said what you’re saying I think, he said that modern grouts are more resistant to staining and such, and also to go with a tinted grout of some sort. I love your use of pattern to give it interest and intention!