Hey thanks for responding! I guess I’m also concerned about a pure white colored trim making the AW look more yellow. Was thinking about trying something in between the AW and pure white window. Anyone ever use Snowbound? It’s a little whiter than AW.

I always paint the interior part the same color as my interior trim, and also the latch edge of the door, so if door is standing open, it all blends with the interior trim. I think if you want to stay with gray on the outside, it should be a much darker gray. What you have doesnt stand out very much.

RHM, I will admit that I am fussier than most about my whites. You say you want to brighten up the walls, so my first question would be "what color are your walls now?" Your trim is Alabaster - a light white that is slightly dirty with a little gray green cast, Your cabinets are somewhere between Alabaster and Dover White. If you measure the light, chroma and hue of Dover White vs Alabaster the biggest difference is the Chroma - how gray is it vs how colorful is it. Dover White is less gray so the so the color looks like it is a bit darker and does not have that slight green cast. The first number is light - So Simply white is the lightest color The second number is the chroma - the lower the chroma the more gray , the higher the chroma the more color. The third number is the hue 90 is yellow, 182 is green - this comparison gets tricky because yellow gets kind of olivish green as it goes to gray and when the chroma is really low, like in alabaster I can see that hint of green. Dover White CIE-L*Ch(ab) = 93.765 8.230 99.280° Alabaster CIE-L*Ch(ab) = 93.002 5.636 99.953° Simply White CIE-L*Ch(ab) = 95.648 4.657 106.615° Personally, the first two colors I would test are Dover White and Neutral Ground. I think Neutral Ground is a bit too dark, but I like a little contrast between the wall color and trim color, so I may do 3/4 Dover white and 1/4 Neutral Ground. How I test and blend colors to get exactly what I want is really simple. I own a box of oral medicine syringes - you can buy them from Amazon. When I find two colors that I like, but really want the color to be something in between I mix several variations of the two colors and paint them on 8 1/2 x 11 240lb water color paper. 1 cc of color A + 3 cc of color B 1 cc of color A + 2 cc of color B 2 cc of color A + 2 cc of color B 2 cc of color A + 1 cc of color B 3 cc of color A + 1 cc of color B I mark each sheet with the "recipe" and then test the colors against the colors I already have in my space.

Use the alabaster for everything, just use different sheen. Flat on ceiling, matte, or eggshell on walls, and satin or semi gloss on trim. Whites will clash with each other, why, take the chance.