hardwod floors are always and will always be the look. though people seem to not underatand thatbthe reason why these products exist outside of harwood. hardwood is just not practical anymore , yesrs ago youd have certain rooms with different flooring to accommodate the room , now, its all usually open concept and having patchy flooring all over doesnt work. honestly i just dont see hoe you can put hardwood lets say in a kitchen , kitchens take a beating , if you can afford to or want to samf your floors every few years , espec especially if you have a busy household , them go for it , i know of no one that has ever resanded their floors and if so , what a mess. so lvp , laminate etc… all have come along due to the demand for the wood look without the issues of hardwood , so its all a decsion though we have decided on 1400sq ft of coretec lvp, we just love the hardwood though just not practical anymore , i cant have adults and kids tip toeing on our floors. plus in the future if you want a new floor , just pick it up , no demo. just my opinion

We have red oak floors covered with carpet in our living room in our 50 year old ranch. That room opens up to our dining/kitchen area which is sheet vinyl on a subfloor (placed over old vinyl.) We were wanting to do glued down engineered hardwood over the entire area and the hallway. The guy who measured said we could put a subfloor over the hardwood to bring it up to the level of the vinyl. Sounded easy. Now the installer says we need to remove all the old hardwood and vinyl and do new subfloor over all of it. Who is right? Is a floating installation an easier/better option?

Leather is the most 'recognizable' pattern for cork (other than the ground up cork board look). When it is laid it looks like hardwood flooring using 'shorts'. It has a bit of a brick look to it. Ignore the 'pink' in the samples. The pink is the very first colour to fade away. It takes a few months for the pink to disappear but once it is gone the cork (Leather and Logan) will look more like oak in tone (yellowish with some hints of green and some gray). It is a 'directional pattern' which means it has a 'linear' sense to it. The Logan is the most expensive cork pattern you can get. The slices of pattern are random. They are hand cut and hand laid. It takes *roughly an hour for 1 person to arrange 10sf of the pattern. It is STUNNING. It looks more like stone. It is random...did I mention the pattern is random? Leather and Logan can have the extra 2 coats of the Loba 2K Supra AT = super tough. The Latte is a FANTASTICLY tough finish. It has the polypropylene finish on it. This is the 'non-vinyl' product Cancork sells. It is tough....right after that it is SUPER TOUGH. And then for good measure, it is TOUGH!!! For a Rental property, the Latte is a product I would recommend. It does NOT need the Loba product. That means you save $1.50/sf RIGHT AWAY. It can handle 3mm or 6mm cork underlay. If you are looking for temperature control, then I like the 6mm underneath...but CHECK your door heights, etc. All you need to do is take your floor sample and the underlay sample they sent you (their supposed to do that...sigh) and see if it 'slips' underneath the doors in your home. It is that simple. I hope that helps... As for the Tacoma...I'm guessing you are looking at KILOGRAMS (700 kg) as your weight limit = 1540 lbs. The weight of a standard skid of cork flooring = 1000sf (ish...depends on the product) = *roughly 2000 lbs. And the skid sizes are PERFECT to fit between the wheel wells of a truck bed. I've watched this stuff get loaded into pick-up trucks for 6+ years. A forklift operator can drop that baby into your truck (so long as you do NOT have a 'cap-it') and off you go. If you only have a short way to go, the 2000 lbs won't be much of a problem...I just wouldn't do a trip to Bella Coola with it. ;-)

I don't think the hardwood from today is nearly as good as the hardwood from even a few decades ago. I have small dogs - both less than 20 pounds. But they're young, like to play, and they've left some pretty amazing scratches and skitter marks in the hardwood - in 2 different homes. Yes I keep their nails trimmed, they get a quick dremel every week. The old floors were site finished oak hardwoods. And there were spots where the scratches were getting pretty bad. The one house in question is in a beach town, so between the dogs and the sand, the floors were very scratched up. I deliberately chose a wood look LVP and it's held up incredibly well, but no one will mistake it for site finished hardwood either. I have engineered wood in my primary home - and while they've scratched that up too, it's somewhat less noticeable because it's a matte finish, and it's pre-finished engineered, which I've heard may be somewhat harder.