I was unable to get a photo of my cabinet doors after work. I was late getting out and the cabinetmaker's hours and mind did not match. I am curious as to what cabinet doors you would use these pulls on. The drawer fronts are completely plain and this is where I want the pulls. The small knobs are going on the door at the lower corner. The brushed pewter with the design inside the circle is a square knob 1 1/8". The square at the bottom of the door is a 2" square. Would you please show me some photos of the knobs you would use on these doors? I thought I was about ready to place my order, but now I am back to square 1, no pun intended. I originally had picked satin nickel cup pulls for the drawers and a square satin nickel knob, but the knob was 1 1/2" and seemed to large for the 2" square. Thank you. Jane

Either SS or bronze will work. Which do you prefer? Remember that with an undermount sink, the faucet is up against the granite, not the sink, so you can use whichever you like. I have ORB hardware and pendants, but SS appliances and sink. I used a SS faucet.

take the plastic off a corner of the cabinet ….looks as though current cabinet with a light stain or clear finish to floor would work and be less hassle. I have used the clear satin coating on wood floors-it does give a little definition and enhances, with the several coats, so the floor boards will be a little richer.

Really would appreciate any help picking cabinet hardware.