Wall Mount Range Hood Depth Options

5 years ago

I'm looking for a copper or wood wall mount range hood which offers different depth options. Does anyone know of any brands which offer this option? Thank you!

Sort by:Oldest

Comments (5)

Buehl
5 years ago
Check AJ Madison. I don't know if they have what you're looking for, but it's my go-to site when looking at different options for appliances. They have a pretty good search/filter function.
kkennedy26
Original Author
5 years ago
Thanks Buehl. I couldn't find an option for depth but the website has a nice search function as you mentioned. I seem to remember reading in a description at some point that the range hood came in a couple different depths and for the life of me, I cannot locate it.
Related Discussions
Wall mount range hood or under cabinet range hood?
Q
Comments (5)
If you look at the Modern-Aire site, they have several shapes where the front tapers at the top to the depth of an upper cabinet, and the sides are straight so as to butt up to, and cover, the yellow cabinet sides you mentioned. Their typical sizes are 18" and 30" high, but you could get a 24" custom one if your budget allows. Or you could get an 18" and have a box made for above it to cover that area and to which you could attach replacement moulding. The box could be made of either wood matching your moulding or sheetrock. Vent-a-hood has a stainless direct replacement if you decide to stick with the same size you now have. I'm attaching the link to the Modern-Aire page that shows their shapes. PS-10, PS-11, and PS-26 all have the characteristics I was talking about above. Here is a link that might be useful: Modern-Aire Hoods
...See More
anchoring wall mount range hood through sheetrock and duct
Q
Comments (4)
Ignoring my opinion about what constitutes adequate air flow, I would recommend obtaining a piece of .060 or thicker stainless steel sheet nominally 17.5 inches wide or more that you can mount to the studs (measure first, cut stainless steel second). Drill all necessary holes, or have the sheet metal source drill or punch them. Then attach the hood assembly to this piece and screw the new combined assembly to the studs through whatever tile and sheetrock is in between. I would use stainless steel GRK screws, but other nice looking screws may do. (I'm skipping holding the hood up and attaching the power cable, etc.) To look decent, the sheet metal might have to be as high as the hood, top-to-bottom, or some other size that looks pleasing.
...See More
Can you drill into a tile backsplash to mount wall-mounted range hood?
Q
Comments (4)
I guess it's done per the comment above?? I was wondering about cracking too! I see photos all the time of what looks like one large tile slab w/ a wall mounted range hood on it, but wasn't sure. Thanks both of you + have a nice weekend!:)
...See More
Wall or cabinet mount range hood dilemma height constraints / too low?
Q
Comments (5)
That's a whole lot of reading. remove the upper cabinet and just do a proper vent hood. I have a low ceiling in my kitchen. i had this one made for my vent insert. I think this would be the best bet for yours. (While you're at it, can you raise all of your upper cabinets by removing a portion of that soffit? is that what you were talking about regarding the attic? they look extremely low. This one she actually painted everything, so just mind the actual vent hood diagram. there is a DIY on how to buil this. you could use the same type of oak, or paint the hood vent a diff color. black could work) https://www.remodelandolacasa.com/2012/01/how-to-build-range-hood.html Where is it venting too? Not the attic I hope since that is against code. it must be vented outside.
...See More
Helen
5 years ago
last modified: 5 years ago
I just had a copper hood made by Premiere Copper. It was completely custom and was much less expensive than other options for copper hoods. My designer ordered it for me.

ETA - With both a copper hood and a wood hood, you buy a hood insert separately from the decorative hood cover. After you buy the hood insert, you send the specifications to your cabinetmaker or the copper fabricator and the decorative hood portion will be made to fit the insert. The style of the hood - so far as I know - is what you order especially with wood since you would generally get the wood that matches your wood cabinets.
Fori
5 years ago
I think Vent-a-Hood and Modern Aire offer different depths of the same models. I'm not sure how custom ($) those sizes are, though.
kkennedy26
Original Author
5 years ago
Fori, A 27" may do the trick. Thank you!

Related Stories

SHOP HOUZZ Trade Pricing: Range Hoods

By Houzz

Premium over-the-island, undercabinet and wall-mount range hoods

Full Story

KITCHEN DESIGN How to Get Your Range Hood Right

By Erin Carlyle

Get a handle on the technical specs, and then learn about fun design options for creating a beautiful kitchen feature

Full Story

152

KITCHEN APPLIANCES What to Consider When Adding a Range Hood

By Toronto Interior Design Group

Get to know the types, styles and why you may want to skip a hood altogether

Full Story

BATHROOM DESIGN Should You Get a Recessed or Wall-Mounted Medicine Cabinet?

By Karen Egly-Thompson

Here’s what you need to know to pick the right bathroom medicine cabinet and get it installed

Full Story

121

Fab Fixtures: The Wall-Mounted Faucet

By Natalie Myers

Give Your Kitchen or Bath a Stunning Look With One of These Space-Saving Beauties

Full Story

KITCHEN APPLIANCES Disappearing Range Hoods: A New Trend?

By Anne Ellard Design

Concealed exhaust fans cut visual clutter in the kitchen

Full Story

281

KITCHEN DESIGN Designer Tips for Range Hoods, Appliances and Lighting

By Barbra Bright Design

Learn how to get your microwave height just right, what kind of bar stool will be most comfortable and more

Full Story

103

KITCHEN APPLIANCES Houzz Call: Show Us Your Creative Range Hood

By Erin Carlyle

Have you customized your kitchen’s range hood? Please tell us all about it

Full Story

KITCHEN DESIGN 10 Terrific New Ideas for Wrapped Range Hoods

By Mitchell Parker

See how designers use various materials and ornamentation to play up or play down a covered kitchen range hood

Full Story

KITCHEN BACKSPLASHES Kitchen Confidential: 8 Options for Your Range Backsplash

By Sam Ferris

Find the perfect style and material for your backsplash focal point

Full Story

Wall Mount Range Hood Depth Options

Comments (5)

Buehl

kkennedy26
Original Author

Related Discussions

Helen

Fori

kkennedy26
Original Author

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

Wall Mount Range Hood Depth Options

Comments (5)

Buehl

kkennedy26Original Author

Related Discussions

Helen

Fori

kkennedy26Original Author

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

kkennedy26
Original Author

kkennedy26
Original Author