Funny that you guys started to discuss this just when I am about to start this same project myself. Here are my findings. First off, if you plan of putting a counter on top of the new 3.8 cu ft FL, good luck, and have your pocket book ready. You see, the deepest "standard" counters are those for kitchens, at 25 1/8". Assuming that one leaves around 5" of clearance behind those newer FL machines for vents, air circulation, heat, etc, then you are looking at about 30"-35" of depth, depending on how flush you want the counter to come to the front of the machine. Having said that, there are 3 prices for laminate counters in the stores (like Home Depot). The counters you see in the store in stock are the cheapest, and will cost around $10 li ft. If you need to pick a finish that matches say the sink counter top in your bathroom where the machines are also located, then that is considered a custom order, even if it is a standard depth. This will easily double the price to $20 li ft. Now if you want to order a non-standard depth so that it goes from the back of the wall to the front of your new FL, then you are looking at $35-$50 li ft, depending on type of finish like rounded vs sqaure front edge, back ledge or no ledge, etc... Keep this in mind when shopping for a counter top. I would like my counter to cover the machines completely, so I might have to bite the bullet and order the more expensive counter top.... Again, I am talking about a laminate counter top, no fancy materials here.... I am from Canada, and here is what the local Home Depot quoted me in Canadian dollars for the 3 options.. 1) In-Store counter (limited finishes) 25 1/8" (standard depth) X 6 feet = $68 CAD Custom order counter (you choose the finish) 25 1/8" (standard depth) X 6 feet = $132 - $150 CAD 30 Csutom order counter (you choose the finish) 30-35" (non standard depth) X 6 feet = $222 CAD I believe the last option of non-standard depth only allows for a square front edge finish. If you want a rounder edge in front, like that found on your kitchen counter, the price jumps to $500 CAD, since the guy said that they have to charge for a full 4X8 sheet, and then cut the custom size from there, in order to get the rounded front edge... One other option you can do, which my brother did very nicely is lay down 2 sheets of plywood (for extra thickness), and tile the top and sides, looks really nice, but is a lot more work...

You need to do some homework. Every material has it's pros and cons, and it all comes down to what you are willing to live with. "Best" is completely subjective. Frankly, if my DH had not felt so strongly about our using a "higher end" counter top (we ended up with engineered quartz) I would have done a laminate. They are durable, warm, soft, and very inexpensive. Completely low-maintenance if you are not careless about using them. Our quartz will be fine, and looks fantastic, but we spent nearly three times what we could have spent on a high-end laminate. IKEA has some DIY laminate for incredibly little cost if you are willing to put in the effort and will buy you plenty of time to do some research on your countertop options. Here is a link that might be useful: IKEA wood and laminate countertops

Heatheron40, very nice. I asked a question about doing a tile countertop in our guest cabin recently as I feel like the look would complement the cabin aesthetic. Also I’m dying to learn to tile and thought it would be a fun place to start as it’s not an everyday space and I could take my time. Most of the responses were against. Basically stating the grout would make me crazy. The guy at the said what you’re saying I think, he said that modern grouts are more resistant to staining and such, and also to go with a tinted grout of some sort. I love your use of pattern to give it interest and intention!

@kel_kat5 - It is a mistake to think that Dayana’s situation is representative of granite counters. Most importantly, the Bahamas White granite she pictured looks like it’s in the family of the Imperial White or Kashmir granites, which is notorious for behaving more like marble and staining easily because it is more absorptive than other granites, I.e. porous. If one is looking for a granite with a white background, check out the granites in the family of Alaska White, White Springs, Bianco Delicatus, and Lennon, which are pretty bullet-proof. I’ve had different granites in different homes, and none even needed sealing, and were carefree, and we didn’t baby them. There are a thousand granites out there, and they should not all be lumped under the same umbrella. Quartz is a great choice if you want a more uniform appearance to your counters. There are stories on this forum of Quartz staining, scorching and chipping, and having resin pools. I actually think Quartz is a wonderful choice for counters. But get it for its appearance and beauty, not because you think it is more durable than granite.