I just finished changing my cabinet hardware from 2 holes to 1 hole on the doors and from 1 hole to 2 holes on the drawers. Ideally, you'll want to put more than just wood filler in the holes. Wood filler on it's own isn't intended for really deep holes, and generally recommends multiple thin layers if needed. I used pieces of dowels glued in the hole with plastic wood on top and then sanded after a few hours. Some holes are more easily spotted than others, but they're pretty well hidden under all the layers of primer and paint. You might want to invest in a cabinet hardware template for re-drilling, too. Good luck...it's probably the worst part of painting cabinets, but worth it in the end!

Knobs. Pulls look like they are competing with the design to me. If you do go for knobs, (I will write what probably doesn't need to be written;) all cabinetry on top should get knobs, not just the doors with the cross muntins.

It's about personal style, but also what is functional. I ended up doing all bar pulls on my drawers and cabinets, because I thought about not just my hand size but my husband's. I just changed the direction on the cabinets vs the drawers. The drawer pulls are horizontal and the pulls on the cabinets vertical. You can use brushed nickel in different sizes of the same style for doors vs drawers, or you can use the same size and do two pulls for the large drawers.

@JAN MOYER Well the holes have been drilled! I showed ur diagram to the workets. I almost delayed them if it hadn't been for you & ( I already been in this trailer waiting to get back home for over a year and a half now) so I honestly couldn't of done this without all of your help ! Thank you for taking the time out of your life to help a complete stranger! The worker here is holding up the hardware here. You can see the cabinets better in this pic ( which I should of shown first ! ) Again I sincerely Thank you I greatly appreciate all of the help ! I hope it's ok since you didn't see the upper cabinets?!