Which of these works in my dining room as a plant stand? Please help!
Daina L
5 years ago
Featured Answer
Sort by:Oldest
Comments (16)
Patricia Colwell Consulting
5 years agokatinparadise
5 years agoRelated Discussions
Which chandelier for my dining room? Please vote!
Comments (85)kimmieb - those are both gorgeous chandeliers! Thanks so much for posting them. Unfortunately, I've already tried to convince DH and can't get him to buy off on anything this ornate. Also, I know they would definitely go with the style of the chairs and table, but I also have a mix of rustic iron and leather throughout the house (my love for early American and English antiques mixed with DH's fondness for the "Old West" has resulted in me aiming for "English hunting lodge") so I think I need to tie this look in to the shabby chic dining room somehow so everything flows. I can't use lanterns because I'm now wired for one center fixture and need more light, and I understand your comment regarding the last fixture maybe being too contemporary, which is perhaps why I've held off ordering it. I'd be getting the antique bronze finish, but it's hard not seeing it in person. The 8' ceiling height is limiting, but I do agree the size of the table needs something with mass. At the same time, I'd like to find an iron chandelier that's pretty and delicate, yet rustic. It's hard to find one that's not too massive, or Spanish, or Mediterranean, etc. Sigh . . . hopefully, one will come to me :-)...See MorePlease help me 'refinish' my dining room table
Comments (33)Update: After doing more research on spar varnish and finding the post I will refer to below, I went to my local paint store and had a long talk with the owner about my project. I decided to go with minwax semigloss clear polyurethane and I was advised to use a lambswool device to apply the poly. Then I came home and read your recent posts, Richard - and yes, product I was talking of (the spar varnish) is a quality product but after more reading I just didn't feel right about using it on this table. I also found this thread on "woodjocks" website and found the discussion leading me towards poly even more. http://lumberjocks.com/topics/2565 So, I have a applied one coat of poly with the wool device. I am not sure how I feel about this wool idea - it seems to leave lint behind? I am thinking of switching to a brush, or to disposable foam brushes for the next 3 coats. Any advice on how to proceed from here onto my last coats of poly (even just some encouragement) is appreciated. I'm not sure how I like the semigloss finish - its nice, but I hope it will be waterproof and repellant to dinner sauces, wine, etc. I am also feeling concerned about my work environment. I am working in a free standing garage and the temps are supposed to dip down into 40s this week at night. Will that be a problem in between dry coats of poly? Here is a link that might be useful: thread on spar varnish I found...See MoreThinking about another plant stand. Can I get your help on this please
Comments (36)I use the FEIT 48" LED 3700 lumen light fixtures from Costco and have them on for 4-5 hours in the morning. The plants also receive indirect sunlight from a North window. The stand in question is offset from the window against the wall, six feet away. The sunlight alone would not be enough to sustain them at that distance and location. There is another stand set in front of the window sans LED light. Some varieties grow well, others appear to get too much light. Plants with low light requirements should be further from the fixture. Leaves for propagation are covered with plastic wrap, in plastic sandwich bags, or in take-out containers with plastic domes. Use fluorescents if in doubt, as some LEDs are too strong or too weak for plants. I opted for LEDs due to efficiency, quiet operation, and they don't need changing every two years like flourescents. They will get better, but there is still room for improvement in the spectrum....See MoreHELP PLEASE too much green in dining room not working with living room
Comments (6)It's the scale of the lamps that you need to concentrate on the most. I've found that most homeowners tend to purchase lamps that are too short/small. I use 28"-30" as my guide. I rarely use shorter than 28" unless maybe in a bedroom or for an occasional table, and over 30" starts to look odd in most homes. If you're looking at a lamp in person, rather than online (which has the measurements) just measure from the top of the shade down to the table. Also, purchasing inexpensive end tables and lamps first can really help change the look of a room, while you're saving up for the more expensive items (sofa, nice coffee table). Here's a before/after of a living room I did for a homeowner, where all I added were lamps, end tables and throw pillows (just reworked her other items). The end tables I used are really great, they work with a lot of furniture styles, plus they have a shelf and they're less than $100. I use them with a lot of clients! Since end tables don't get a lot of abuse, a "cheaper" one is a real budget saver. Great End Table As you can see in the Before, this furniture is large and overstuffed. A too small lamp would look silly. Using the above linked end tables and 30" lamps: You can use an end table like those (they're 24" high) and the proper size lamp, and it will work with just about any sofa you choose. Also, when choosing throw cushions I would get rid of the two red cushions on your sofa, and replace with a neutral. Maybe throw in a lumbar on one of your two chairs. And here's a room (while we were rearranging furniture) where the homeowner's furniture was not oversized/overstuffed. As you can see, these same end tables come up higher on her sofa, but still work. I can't remember how tall these lamps were, probably around 27"-28"....See Moredecoenthusiaste
5 years agolast modified: 5 years agoDaina L
5 years agosaratogaswizzlestick
5 years agodecoenthusiaste
5 years agolast modified: 5 years agoDaina L
5 years agodecoenthusiaste
5 years agolast modified: 5 years agoDaina L
5 years ago
Related Stories
SMALL HOMESRoom of the Day: Living-Dining Room Redo Helps a Client Begin to Heal
After a tragic loss, a woman sets out on the road to recovery by improving her condo
Full StoryDINING ROOMSRoom of the Day: Putting the Dining Room to Work
With a table for meals and a desk for bringing home the bacon, this dining room earns its keep
Full StoryKIDS’ SPACESWho Says a Dining Room Has to Be a Dining Room?
Chucking the builder’s floor plan, a family reassigns rooms to work better for their needs
Full StoryDINING ROOMSRoom of the Day: Traditional Dining Room Shaken With a Twist
This home's colonial architecture inspires formality, while the room's bold color, a mix of styles and a glossy bar update the look
Full StoryDECORATING GUIDESRoom of the Day: Warhol Rocks a 19th-Century Dining Room
Stellar modern art brings new energy to a dining room in an 1896 mansion with traditional bones
Full StoryWALL TREATMENTSRoom of the Day: Original Mural Brings Joy to a Formal Dining Room
French inspiration gives traditional style a twist in this Victorian-era home
Full StoryLIVING ROOMSLiving Room Meets Dining Room: The New Way to Eat In
Banquette seating, folding tables and clever seating options can create a comfortable dining room right in your main living space
Full StoryDECORATING GUIDESRoom of the Day: Romancing a Maine Dining Room
Glossy paint and country-style furnishings make a 19th-century interior an affair to remember
Full StoryDINING ROOMSRoom of the Day: An Elegant North Carolina Dining Room
Sophistication meets durability and easy-to-clean surfaces in a dramatic style-mixing space
Full StoryROOM OF THE DAYRoom of the Day: Bright Red Dining Room Glows in Fog City
Mist can put a damper on the mood in San Francisco, but this lively room fires up the energy
Full Story
bossyvossy