This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

wowed, I agree with your response, and it's interesting to me. I would want at least sound, if not visual, separation, between a lavatory/dressing area and a bedroom. It's interesting to compare the bedroom/lavatory area/toilet and bath area layers to a palace set up: the anteroom, the throne room (no pun intended) and then private quarters. In the same way, access and function are layered. I think most users would agree this sort of layering is a good thing. Contrast this to the evolution of design of the kitchen/dining/family room area of a house. For me, sound separation of activities (eg., tv watching vs. a conversation in a dining room, or relaxing in the family room without the din of dish stacking) or visual separation (chatting with guests in the dining room while not worrying about how the busy food prep area looks) or even olfactory separation (reading a book in the family room while onions are sliced and sauteed in the kitchen). The grand, open flowing floorplan for these areas is popular, but for me, I prefer a little segregation, especially as the number of users and potential simultaneous uses goes up. Seems to me, as the average household size has shrunk and more people are living in a house of only 2 or 3 people, sure, the open floor plan can work. But for now at least, I want a little bit of separation of activities, and I like my "antiquated" floor plan, with separate kitchen, dining room, family room (tv) and living room (piano). A tv and piano in the same room would be a nuisance for us. So I guess on a more micro level, I'm looking to separate activities in the bathroom. But I agree, if in the process of pulling them apart and relocating them, I mix grooming and sleeping, well, yes, that would be a disastrous unintended consequence! responding to another post, I don't know why that link didn't work, here is the direct url: http://www.farrow-ball.com/Company/FBStyles.aspx?language=en-GB&style=5

Lovely! I like the classic white tile and porcelain and how you used furniture pieces in the bathroom. I love that the storage at the end of the tub has pull-outs that can be reached from the toilet. Your custom sink and backsplash and counter are unique and beautiful. Yours may be the first bathroom sink I have seen in which a small or medium dog could be washed! That is a good thing! I showed your pictures to my DH because I am thinking of classic tiled walls with a chair rail for when we redo our bath in a couple of years. He liked it! I was expecting him to say, "too old fashioned." He did not, he said it looked nice. From him, nice is a compliment. He even liked your rows of listello. I was just at the Tile Shop's site the other day looking at the Hampton tiles because someone was selling some on Craigslist. I am hoping to do as you did and get what I can cheaper there, and fill in the rest from the store. I can see that you worked very hard to secure all of your materials - and then cut the floor tiles to size and culled the Hampton tiles, too! You succeeded very well in getting the look you wanted while saving money along the way. Congratulations, and thank you for the pictures and great detail and supply list.

We went with quartz in our kitchen (3 years ago now) as I know I am hard on kitchen surfaces - lots of acids between citrus and vinegar, bright fruits like berries, & not too good or quick about cleaning up spills as they occur, etc. Best decision I ever made. Just installed marble in all 3 bathroom remodels as I know I am easier on bathroom counters than kitchens and was willing to take precautions. A moment of regret when water stained it before it was sealed, but it dried out and the (professional) sealing is great. We did plan ahead - using counter "coasters" for soaps and things, installed a master sink with wide ledges to put things on, etc. Very happy with the soft, cool, translucent look and feel.