[extra white] cabinets may also look a little greenish against the agreeable grey as its such a large area? I doubt it. Anything can happen I suppose, but most 'just whites' are purposefully created from the yellow and green-yellow hue families because of the way we perceive certain wavelengths - the yellow/green-yellow region of the spectrum, low chroma whites will read as "just white" no strong overtones one way or the other on the color wheel. What about SW 7661 Reflection? I added it to the infographic so you can compare. I have color notations from SW, but I don't know to what standard they measured their colors. So, I always indicate that on images. I scanned Reflection with my colorimeter and did the conversion myself because the SW notation for Reflection put in too far in the green hue family, IMO. I mean it was within a reasonable range, but I trust my numbers more. The umber in the sample of Agreeable is 9 but in the Reflection it's only 1. Does that bring it over closer to the cool side on the wheel? I don't do the formula thing - reading the individual colorant components of a paint color is futile because of this thing called substance uncertainty. Substance uncertainty tells us that due to the physical make-up of colorants, it's impossible to know or predict what will happen when mixed together. Some colorants have big particles, some have small, some are more potently concentrated while others are thin and weaker. And these colorant characteristics vary from brand to brand. The only way to know is to mix the color and let it dry. So, could the factor of umber be the reason why Reflection is a green-yellow and Agreeable is a yellow? Maybe but there's no way to know that for sure. I am trying to find a greyish color that does not have the green or pink undertones. I don't subscribe to blogosphere's concept of undertone either. Undertones are about density of the paint film and how much, if any, of the substrate you can see thru the paint film. It goes masstone, midtone and undertone: Masstone is the thickest density and zero substrate shows thru. Midtone is the Goldilocks of paint film density. It's just right, zero substrate shows thru but the film is spread per manufacturer spread rate specification and is nice and even. Undertone is revealed when the paint (or other medium) is spread thinly so the substrate can be seen and light can reflect thru the thin film, off the substrate, and back up thru the thin film. You have to take some purposeful action to manipulate the paint (or other medium) to reveal undertone. How does one find out where in the wheel a color lives? Never, ever compare paint chips to a white background. White overpowers color swatches and makes them appear more grayed down, not so bright and intense. Underestimating a color’s brightness and intensity is the #1 mistake people make when choosing paint colors. “It’s too bright” is the #1 reason people give as to why they don’t like the color they chose. I use spectral data and math to calculate a color notation, hue family. If you don't know how to use spectral data to get a color notation, determine hue family, then you have to eyeball it. You have to visually assess your target color compared to a set of chromatic hue parents. If you want to discern what hue family a color belongs to sans color measurement data, then you compare it to hue family parents. Compare the uncategorized color to a big chip of red, blue, green, yellow, etc. Color responds to its context. Comparing one color to another is basic context. You do that because it is a that which is like unto itself is drawn kinda situation. Put the child color (your color) next to its hue parent and you can see the similarities and thus determine what hue parent/family a paint color belongs to. It is no different from human kids and parents. See a kid running around at the playground and he looks like any other kid. Put him in context with his family and suddenly you are able to recognize similar features and compare attributes, and it quickly becomes apparent that junior is a chip off the old block. Same thing happens with color. Through the process of comparison, you will see the hue family to which a color belongs. Here's a list from SW and BenM of saturated colors that can serve as hue parents for comparison purposes in order to determine a color's hue family. Download Hue Parents Infographic I think I got all you questions. Hope it helps.

I have anew gray currently in my bedroom on the walls and alabaster on the trim. I think it would be beautiful to have the trim and perhaps the door also sw anew gray and the walls alabaster. Another look depending on the height of your ceilings, you could paint the ceiling anew gray with alabaster walls.

BenM's Collingwood OC-28 is a good equivalent for Agreeable Gray. You don't have to understand what all the number mean in order for the notations and data values to paint a picture of how similar these two colors are. They're very similar across the board.

We bought 4 pieces of 2'x2' drywall and painted the bottom 4 inches our trim color and the rest of it one of the 4 possible choices we were considering. We wanted the carry them to different rooms of our current rental to see the colors in different lighting, different size rooms and different times of the day (we also have to pick one choice for our whole house in our new build).