Hello Remodel Mama, The Jolly is a square-edged bar liner used as an accent mid-field. The Quarteround is a contoured trim used to wrap over exposed edges (corners and exposed substrate) and can also be used as a horizontal accent element if you choose. Shaughnn

MK we have been in the flooring business for over 30 years. I am assuming you replaced the vinyl with Ceramic tile not vct tile. If so, you don't necessaritly have to use quarter round. You can use vinyl cove base, you can sit your base right on top of the ceramic tile, or use quarter round. However, you need to caulk in between the tile and whatever you choose to sit on top of it. You can get colored caulk to match the floor or wall or base. If the quarter round you use matches the rest of the house it will more cohesive but that is only if it compliments the colors in your tile. If it doesn't then match the quarter round to colors that are in that room.

I think many here are being a little hard on the crew that did this work. Whoever did the work is definately lacking some experience in woodworking and capet for not finishing the transition, but i see nothing wrong with the tile work itself. Obviously they arent carpet mechanics, or they would have finished the carpet transition, so let's get that one out of the way first. Secondly, many of the pictures show incomplete and improperly completed cabinetry and areas where they cant possibly nail or anchor the wood trim to. Let's face it, ANY wood trim looks crappy on a tile job but it was required here. Let's ask why it was required here. Because the door sills and the base were higher than the finish floor height ??? ok so why didnt they remove and reinstall the basebaords ? possibly because it may break when being removed or some pieces may have been already cracked, PLUS it would have lowered the height of the base. What does this mean? It means that potentially the walls needed preparation, painting, and possible the walls painted to to get an exact match ... which any experienced floor mechanic will tell you is no easy or quick task ... so they used trim. I guess alot of this depends on what was discussed between the company and the owner/poster. Back-cutting for open-ends in shoe-molding and 1/4-round molding is standard, however it is unusual to do a complete 45 degree cut, only a partial with a sheared end (pictured): example: The problems I see at your inside corners where the trim is riding above the tile could possibly be from grout, thinset, or tile holdiung it up, but I would guess it is from an improperly cut inside corner on the moulding piece. The isntaller probably did 2' 45 degree angles which would work if the existing bas eand the floors were perfectly perpendicular and parallel ... they never are ...so the right way to do it is to cus the one piece square to the inside corner and to cove the meeting piece to the profile of the trim. This facillitates the cove pivoting on the radius of the trim piece making any out od squareness irelevent, giving the appearance of a perfect fit almost every time (pictured): example: Placing trim accross transitional areas or doorways is unusual, but it really depends what was there to begin with. If the existing doorway sill height went above that of the top edge of the tile, then they probably did not want to leave an opens gap. I can not tell by the pictures if the tile is an issue or of varying heights. It seems that your only issues here are aesthetics caused by basebaords that were too high to begin with, and incomplete or improperly completed cabinetry work, possibly because this area had carpeting in previously ? While I agree the carpentry craftsmanship is not exemplary, to be fair, they did not have alot to work with here because some of the pictures you have shown, show areas the could not do much about to begin with, like the metal dishwasher base (cant nail to metal and there might not have been too much width to chamfer out the trim for it, and the corner undr your cabinet doesnt even have a base block to nail to, which is either a opening for hvac or air moement, or it is an area never completed with wood base to begin with (whoever did your cabinets to begin with didnt finish it?). The only way this could have been done to ease every concern you have shown, if the existing base was gapped, would have been to remove all the basebaords, scribed them back to the tile or replaced them entirely if they break during removal (no guarantees on that one - sometimes they break and sometimes they dont and sometimes htey are already installed cracked but repaired and you cant see it til you try to remove them), then this would have made the wood base height LESS and tould have required at a minimum touchup paint, and in the worst of cases, respacling, repainting, and even then it might not have matched the walls, so the pickiest of people would have wanted to paint their entire walls to match exactly. It begins and ends with the basebaords height. If you dont like the look of the trim, then the base needs removed and reinstalled or replaced to cover the gap, which would create a need to repaint or repair the wall above where the base was originally set. I agree the carpetntry work on the wood trim was bad. The tile looks good.

Here you go. [https://www.houzz.com/products/gold-marble-quarter-round-trim-molding-honed-1x12-marble-from-italy-25-pieces-prvw-vr~79378100[(https://www.houzz.com/products/gold-marble-quarter-round-trim-molding-honed-1x12-marble-from-italy-25-pieces-prvw-vr~79378100)