lyban: The Mount Sainte Anne also looks very nice; but seems I did not pull a card for it when I was at BM--even though I pulled almost all the blues grays and greenish colors. I find so many times posters will recommend a color and it's not out in the racks and I need to request it; wonder why that is? Next time I go in I will ask for it, though, as it also looks a good possibility. DS is resereving judgment until I put the sample boards up as he felt the colors looked different between my computer monitor and the paint chips. I'm taking DS out this evening to finalize the mattress--there is a Friends and Family additional 10% off sale at Sears and the associate I was working with suggested I'd get a better price then.

These are close matches in terms of Lab values. Which are the values that paint stores and easyrgb uses to find color matches. The problem with Lab values is they don't describe what colors look like. They're great for comparing colors and quantifying differences in Lightness, redness/greeness and blueness/yellowness. What they don't do is tell you how much colors do or do not LOOK alike. So use easyrgb to find color matches and then hue/value/chroma to compare how similar they do or do not look. And then you can decide if one of the similar colors will work or if it'd be better to get a custom match mixed.

Okay, I’m going to put in my 2 cents here, mostly to educate the DIY’ers out there About paint. I worked in the paint department of both Home Depot & Lowes for a combined 6 yrs up until 2016. I’ve taken ALL the available paint classes. I’m going to tell you guys a secret... the reason it takes a MINIMIUM of 2 coats, is due to several influencing factors. #1) your wall texture. The more porous, or heavily textured your wall is, the more likely you will get less “coverage” out of your paint, because it is either being sucked up by the texture, (usually unprimed) or it is a bumpy texture which has more surface area to cover per brush/roller stroke. #2) your roller. The texture of your roller must match the texture of the wall. Smooth walls require a shorter napp. Heavier textures require a longer napp. When these things don’t “match” so to speak, you’ll get what are called “hollidays” in the painting world. It’s those little spots where the “under Color” shows through, as if the new paint took a “Holliday” in that spot. This happens all the time when using rollers, regardless, but it’s worse when your napp is too short for the texture. #3) the amount of titanium white your paint brand started out with Before tinting. Titanium white is GENERALLY what are Considered “solids” in the paint, although I’m sure there are others I’m forgetting. #4) the COLOR of the new paint. each color has a “depth” which requires a particular amount of tint. Whites, off whites, pastels, and generally lighter colors are tinted using a WHITE tinting base. These cans are the purest whites that company offers, and can be used right off the shelf. They are usually 3/4 or more full of Titanium white. Medium dark colors are tinted into a “medium” tint base. These cans CANNOT be sold directly off the shelf and must be tinted. They have less overall volume inside the can to begin with, (in order to leave room for tint.) & they are around 1/2 titanium white. Dark or deep colors are mixed into a ”DEEP” tint base. These cans have the least overall volume to begin with, and there’s about 1/4 or less of titanium white in each can. Here’s the secret.. titanium white is what provides the coverage! Tint, by itself, doesn’t cover, it’s somewhat like a gel, and is VERY sticky on its own. It is essentially pure pigment, mixed with an additive to make it viscous. when you take a color, let’s say RED, which by itself has a very translucent property, and you dump a whole boatload of it into a can which (in order to achieve that deep rich he’d you’re looking for) has virtually no titanium white in it, you’re going to get a see through paint, no matter the brand. now, have you ever been offered a tinted (usually grey) primer to put on under that red paint? Did you choose against it, thinking it would be unnecessary? Think again! That neutral grey, gives that red paint a dark neutral base to start from! It richens the color on the first coat! You can sometimes have the primer tinted pink, but grey primer or a grey paint base coat works best. (Don’t believe me? Do a sample board painted 1/2 white, 1/2 medium grey, then paint red across the whole thing.... see? 😉) also, don’t expect your deeper colors to dry as quickly. they don’t. Tint, by itself, never stud.. or “cures” because there are zero gardeners in it. All that tint needed for that deep color, created a very sticky situation inside that can. The other secret I’m going to tell you deals with the other additives in your can besides the titanium white. They are the clear liquids. The chemical mixture and amount of each of these, determines the dry time, viscosity, elasticity, yellowing propensity, durability, hardness and water soluabLilith of the paint. They are basically the GLUE holding it all together, and keeping it on your wall. Each company has a different proprietary blend, making its paint unique. Ive found, that for the most part, how well it turns out with YOUR can of paint, is based on the project, the knowledge of the painter, and the teaching/advising capabilities of the sales clerk. Other than that, MOST paints are created FAIRLY equally. Do your research people. There! Now that’s a thing you know. 😉👍

GIVE IT SOME TIME! :) I painted my bathroom a BM color and HATED it... A couple weeks later it grew on me, especially as my remodel came to an end... I too was tempted to paint right away but decided to wait. Maybe the color will grow on you. I would wait 2-3 weeks and see how you feel about it then.