Thanks for the comments. I will let you know how the shower tiles are once we use the shower. (Still need to get door installed and finish the vanity.) I updated the photos and added a close up of the accent tiles. (Excuse the glare of the flash) The tile we used is from United Tile. The primary tile is Lithos Bone from the Keraban line. Not sure of the name of the accent tile, but I believe it is part of the same line. Photos are at same link as above, but for convenience I will include it here. Here is a link that might be useful: Phot Bucket Bathroom Remodel

I could see a light soft gray for the tub and shower. Down the road, you may decide you want to change the wall color and accessories. With the vanity and tile in a neutral gray, you could bring in any other color you wanted and it would look great.

Hi everybody! I have been waiting all summer for it to cool off. It seems that the heat makes my dizziness and nausea worse. I have lost about 15 lbs with being too sick to eat throughout the summer. I just this week got my helper here to help me clean the garage and then I moved the vanity out there and sanded it a bit in the easy places, and got it up on a table. I got the brass floor protectors pried off the bottom of the legs and was pleased to find no holes have been drilled in them. That means that I can drill holes for the feet I bought. I have adjustable feet that will give the vanity an extra 1/2" of height, and that can be screwed up to give another 1/2" if we want. That would make the legs appear to float way too high in the air, so I don't think it will work. the extra 1/2" will have to suffice, with the ability to make the vanity level so that the sink will drain properly. I have also decided that the bail-type handles that came with it are not going to work for us. I can't see us fumbling around trying to grab the bail that has recessed back into the grooves of the handle around it, standing there with water or soap in our eyes. A knob is much easier to use. I had Hubby try using the bail and he vetoed it on the first try and said, "replace 'em!" I am using these on doors of a set of shallow cupboards that will be recessed into the closet of the the neighboring bedroom. I figured they were a sure bet for the six drawers, too. I am not going to use the center drawer anymore, what with all the plumbing going on above it, so I will just fill in those holes. I need to cut away the bottom of the drawer space, then move the drawer support piece to the left or right. It is at dead center right now, and the sink's drain will need to go there. I just have to sand down the fluted areas of the vanity table, then it will be ready to be primed and painted. I am still leaning toward painting it the violet Peace and Happiness. I have purchased more components for the plumbing. I have all of the shower controls and the rain shower head and regular shower head. Still need to get the hand-held and some safety hand-hold bars for the shower area. I still have not finalized a wall tile (looking at fake Cararra tile for the room's walls) or floor tile or the surface for the top of the vanity. We HAVE concluded, though, that we cannot get this job done until Toby, our ever-more-confused beagle/golden retriever mix, dies. He will be 16 at the end of this month. He has spinal arthritis and began vomiting every time he was given his Tramadol or his glucosamine/chondroitin pills, then quit taking them. He had to go on prednisone to control the pain. He is peeing a lot in the house, always on a rug or quilted mattress pad put down for him. The bathroom is his main place to pee. I will not have my new floor grout saturated with dog pee. I don't think the poor guy would cope well with the construction, either. He is now blind in one eye and somewhat deaf. It would be too confusing for him to do all that construction. So even though I can't get Jim over here to do the work, if I could, I would not be able to do it until Toby passes on. So, instead, we are getting new gutters and trim, and getting our four remaining windows replaced. We did the other three windows when we remodeled the kitchen and made the living room into the library/music room. I am in the process of cleaning and decluttering so the window guys can get in to measure!

I had the exact same problem. I picked out the vanity I wanted but did not think about the fact that it wasn't made to sit flush against the wall. I spent a month looking for something else, but in the end we decided to go with something shorter and have it not be against the wall. But we were going from 72" to 60" which is probably not workable in your mom's situation. I did find a lot of vanities that did have flat sides and could work in a corner, if you are willing to have the countertop fabricated. They just need to not have any trim detail on the top or bottom like the one you picked out does. I would just look at the ones without the pre-made tops. Because the pre-made top will still leave you with a slight gap because of the countertop overhang. This is an example: Avanity Modero which is sold everywhere, not just at Lowe's. The cabinet we ended up buying is an Avanity Madison which won't work for you, but I assume it is of similar quality. We are pretty happy with it. The drawers and doors have soft close but I do feel like the glides in my Ikea kitchen drawers are better quality. It is very pretty and I wanted a stained wood so I am really happy with our choice. If I had been willing to go with a painted finish, I think we might have stuck with the 72" Modero.