Hi again,,,well, We decided to buy a different greenhouse instead of messing with the hfgh,,,I decided it was not going to be big enough. We purchased a 17 x 32 gothic style greenhouse from Griffins. I have had 2 of their models in the past when I had a greenhouse business. I had the 17x48, 2 of them. I don't need one that big, so I went with the smaller one this time. I am going to sell plants on the weekends. I have thousands of seeds started right now in the basement under growlights.

I have decided that I will make the 10x12 work for me; I will reinforce the heck out of it. I am going to be growing trees, I will need the height. ACK, I went by my Local HF Store today, "Just to Check", I should have my Money by Tuesday... They have the 6x8 in stock $399!, but have never had the 10x12 in stock, Granted when I gave the part number to a stock clerk, and told him that it is listed on Harborfreightusa.com, he said that it is a new item and should be stocking it soon... SOON, how soon, my 20% off coupon, expires on the 18th (Does that mean I can use it on the 18th, or that the last day I can use it, is the 17th) Sigh. I am only about 130 Miles from there Camarillo Warehouse, I wonder if I can do a will-call, and use my 20% off retail store coupon... Leme see, 260 miles round trip call it 9 gallons of gas, at 2.60 a gallon, call it $24 bucks for gas, and 3.5 hours of Driving, one hour for The hassle at will call. Oh, I can not forget the Stop at Canters Deli for lunch for me and my helper, so add another hour, and another $40. Oh wait, I cannot use my car (3 door Saturn, I do not think the big metal framed box will fit in it, so I have to take my wifes truck, Yeah my wife has the truck, what can I say, she is a Red Neck Woman, I think Gretchen wrote that song for her, but my wife is better looking.) Ok where was I, oh yeah Driving the Truck, well I can still average 75 MPH, but the mileage is gonna suck, so that would be $40 bucks in gas SO $40 for Gas, $40 for Lunch, and 4 and a half, ok call it 5 hours of my time... Hmm, well there are about 9 HF Stores, (other than my local store), that are 30-75 miles away, I guess I am gonna have to break down and do that old fashioned thing and let my fingers do the walking. I hope they have it for the same price as the Mail order site. Yeah, I found out on this site somewhere that the www.harborfreight.com site is for mail order/web order prices only, and the www.harborfreightusa.com sight is for retail stores, but it only shows stock items (Not what is in stock, but what they can stock), and they do not show the prices. So does anyone live out here in Southern California, and want a free meal at Canters, and Corned beef and cabbage (my wife makes a Wicked corned beef, she slow cooks it all day), oh yeah and lots of Guinness. (Most of the Guinness will be after it is built. I will be taking lots of Pictures, and using the extra reinforcing mentioned elsewhere on this site. I will also be sinking the Frame (But on wooden supports. I will be sealing the open edges of the Panels with 100 Mile an hour tape (Also know as aluminum tape I think), and then running thin weather-stripping along the inside edges of the panels. I will buy a couple packages of Extra Spring Clips from Charlies, and probably screw in the panels on the roof, since they will not be easy to remove for the summer months. I will probably add extra Triangle corner reinforcing, Guy wires with those funny twisty things and some nice big anchors into the ground. I have a 220 GFI for my Hot Tub near where I will be building it, but I probably should not tap into that for the greenhouse. I do have a couple of Blank spots in my fuse box (Why do they still call them fuse boxes... oh yeah I think they are called breaker boxes now), it was easy for the Guys to run the Power to the Hot Tub (About 15 minutes), but then thats what these guys do for a Living. I probably will not need power to the greenhouse, till Fall anyhow, I will be removing panels and using shade cloth for cooling in the summer. One corner of the greenhouse will be just past one of my Spare Sprinkler heads, so I can tap into that for water, and if I install timers inside the greenhouse, I can have different watering schedules for the watering and the Misting... I assume that is what I should do. One other thing I will be doing is running an extension from the clothes dryer vent to the greenhouse to have the clothes dryer exhaust into the greenhouse... Free Heat and moisture. (Most of our clothes washing happens late at night anyhow. I figure I will till up the ground where the greenhouse is going (Should make leveling it easier), and then I will be flooring it will all the shingles that blew off my roof over new years weekend. Ok, what I am I missing, ahh yes, orientation, if I remember correctly this greenhouse is 10 feet wide, and 12 feet deep. The greenhouse will be about 8 feet south of my garage (I already can see that gap is gonna become a place where you toss all the crap for the back yard, but it would make a good place to park my Garden Tractor). The winds here come out of the South, Southwest, I was thinking of Orienting the Greenhouse so that the door is facing west, I figure that would be better than south, and having the door on the east or north side would be awkward. Does this orientation sound ok? Or should I really put the door on the North side? Now a question for those who have built a 10x12,It is hard to tell from the Instructions, but it looks that the secondary brace for the vents is a separate piece of metal, so would it be possible for me to put all for vents on one side (In this case the North Side), of the roof? I do not think that having those vents facing south and opening up into a 40 MPH wind would be too healthy for the vents or the greenhouse (I am imagining a balloon being rapidly inflated), plus the wind blowing across the vents on the North Side would provide a Nice Low Pressure area, increasing the effectiveness of vents on that side. Am I missing anything (other than the greenhouse kit?) any suggestions, corrections, or Ideas. Sorry about writing books, hopefully most of you find it entertaining, rather than annoying

I ALWAYS play nice (well, at least MOST of the time!!!) Okay, pictures have been taken - but not DL'd to computer yet (I'm surfing @ poolside via WiFi... Oh the SACRIFICES I have to make! ;-) I think I've been inspired to post an addendum to my "Garden Page" (you can get there from my webpage, linked below). I haven't done it yet, but I'll try to post my GH erection efforts "Step-By-Step." They won't be as good as conifers'/Dax's pictorial, but I'll do my best (Gotta "Give Back to the Community," right?!!) I think the wood-cutting is still a "hair" off, but the 'errors' will be put on the back-side (next to a fence, where no one will ever walk / have an opportunity to bend the aluminum base). Or maybe I'll add some skinny/lath/shim kinda material for the Too hot to dig up veggies right now, so I'll postpone that 'til early evening (or early tomorrow morning). I'll probably move my "boring observations" to the webpage (When I start it!). I'll just make note, on here, when I post updates - so I won't bore everyone with my long-winded commentary!!! Of course, I'm *sure* I'll have more questions as I go through this - and I *will* post those questions here! And I just thought of another Q: Should I paint the RW base before I assemble it? If so, white (for reflective qualities)? Or black (for heat-sinking)??? Or should I just hold off on that altogether (bearing in mind that it'll be easier to paint BEFORE I assemble it)??? Any thoughts...??? Thanks - AGAIN - for all the support, insight and advice! And thanks - in advance - for enduring my upcoming questions!!! You guys ROCK!!! -Nancy Here is a link that might be useful: IMQTPI's Garden Page (I'll update it soon!!!)

Yeah they are very sturdy, Dave! I'm very happy with it :-) Okay Riddle Me This, Garden-Webbers: I bought a roll of window screen so I can, well, keep the friggin' bugs out! How do you "screen" the upper vents? Seems to me that - even if you don't have a self-opener - you still need to be able to reach up-and-thru the vent from the inside of the GH. i.e. to use the vent-support-thingie to prop the window open. Even worse w/the self-opener since the unit is pretty cumbersome, size-wise. I'm kind of envisioning that the screen should fit along the 3 "sides" of the vent and be 'stuck-down' to the roof (/framing) of the GH in some fashion (it'd undoubtedly "pooch-out" around the sides when the vent is closed). But I haven't quite figured out how I'm gonna finagle that. Doorway screening shouldn't be a problem. I've seen those dangly doorway screens w/magnets @ Charley's (and other sources), so I'm not so worried about that. But I am definitely curious to know if anyone has screened the upper window-vents and how that was accomplished (Pictures, anyone??). Thanks, in advance, for any suggestions! -N