Not as though anyone really cares about a trash can, but I installed the unit yesterday. Had to use shims under the base of the unit so it would sit high enough to clear the bottom of the face frame, then just screwed through the shims down into cabinet bottom. I debated about attaching the door because the cabinet guy ordered me a new door since I already had a knob installed in the corner of this one. I need to have a centered pull instead. I figured this would give me an opportunity to practice on the installation. It was easier than I thought and now I don't know if I can bare to redo the install on my new door!

Even if I was willing to have knives on the counter and count on the baby not climbing up their, a knife block or magnetic strip wouldn't be very feasible for us. We keep kosher so we have separate knives for meat, dairy and parve (neither meat nor dairy). On top of that my favorite knife is a chinese chef's knife (shaped like a cleaver but lighter). I don't have enough available backsplash to put all those on a magnetic strip. mkitchen, I did find a listing for a baby proofer around here. I'm a little concerned that if we get one out, he will want to over-do it. Did you find the suggestions reasonable? And how much did it cost? lightlystarched, what kind of latches did your parents put in that got misshapen and useless after a month? We used latches on a few doors and drawers when our kids were little and they lasted for years. We have put latches on the low doors and drawers in the entertainment center because that is where we have her play area set up and we didn't want to be saying "No" all the time there. My DH and DDIL prefer that we say "only look" or "only touch" if it is something that she can touch but shouldn't put in her mouth to tell her what she can do instead of "no". I prefer to leave "no" or "only look" for the things that she might damage like the vertical blinds and secure the things that could quickly damage her badly.

First sorry so long: Finally I found a post during a search on Google! Thank you Gooster for sharing both style cabinets depending on how wide the door is. Right now I have stiles in the middle of my partial overlay cabinet doors (4 cabinets) and I dislike them. One of the designers (who used my measurements and cannot give me an exact price yet) managed to design my kitchen with more cabinets that are less wide to have no stile in the middle of the doors and only have the cabinet above the sink with the stile which adds to the cost (gave me a ballpark cost as he needs his own measurements and then I realized he had one too many cabinets below and I told him that I must have given him a wrong measurement so I measured again using my new tape measurement. He has not gotten back to me and he is about 1 hour from me so he wants me to visit and figure out everything at his store and be sure before he comes by to do his measurements that possibly could change everything. His sales tax is half due to his location but then again I have to get my own installer and the stress that comes along with that. The other cabinet designer came to my home to get accurate measurements and bought sample doors on both visits so far. This visit he brought me three whites in sample doors to compare in the lighting in my kitchen. He designed my kitchen with the larger 39" wide cabinets that I have now with the stiles in-between the doors and I told him I liked his design a lot but I did not like the stiles. I did like no blind cabinets and the fact that I would have mostly all drawers and one of the two corner Super Susan's is a half Super Susan to have a pan cabinet which I like. He also added a cabinet over the sink (with glass doors that look nice but I may remove the glass to keep the cost down and I do not have anything to show off right now) that is also wide with a stile. He said that Shiloh's inset cabinets wider than 36" have a stile but recently they will let you pay more per cabinet to remove it but the cabinet will not be stable. Why does it cost more to remove a stile? Maybe it cost more because then the butt doors will be wider? Should I do more cabinets to add a few more to the cost, leave the stiles as I like the look of inset or remove the stile and take a chance of less sturdy cabinets and pay a little more for the butt doors on the wider cabinets? Why do other brands like Honey Brook Custom Cabinets, Inc. allow no stile in the middle of the doors as long as the cabinet is less than 42" and they say the cabinet is still sturdy? Of course there was a higher price difference between the cabinets but I have not had a chance to go back to the store to get an exact price. The other store was trying to push me towards the full overlay Hanssem Cabinets and telling me the custom cabinets in inset was $8,000 more. But now that he sees I have no interest in the Hanssem cabinets, he said he can keep the costs beaded down and for me to come back to the store to look at the inset cabinets on display that are painted BM Cloud White which I liked the color of and the look of. I need to keep my costs down as I am redoing all the floors downstairs, adding recessed lights in my large home office, fixing the mess the other contractor did to my ceiling when he installed recessed lights at the end of 2011, most likely having to remove the popcorn in the ceiling due to the mess and holes the installer left, installing tile floors, replacing my cracked vinyl windows with warm windows and doors that will be costly and of course there is the new counters, hardware, under cabinet lighting possibility and installation costs. I then have to replace the 22 year old carpet upstairs with new flooring and replace those windows also next year. I need to replace three toilets... I can go on and on and I just got a new water heater that was a lot. Would the door be unstable if I remove the stile? Should I make more doors. I prefer so far the designer that came to my house to measure and then came back yesterday with an installer to give me an accurate price. The other designer does not want to bother until I finalize a plan at his place with my measurements and not his and I would have to find my own installer. This is why I was going to switch to full overlay due to not wanting stiles between my doors but I love the look of inset cabinets. I can keep costs down by taking the glass out of the cabinet over the sink which I think I may do. I am still waiting for the install price. The designer selling the Shiloh Cabinets that was at my home yesterday has a corner cabinet with no Super Susan in it or Lazy Susan but that is fine with me as I will need a ladder either way and want to see everything and keep my costs down but at least I would have a full Super Susan and a half Super Susan. I have two Lazy Susan's in my kitchen right now. I was sure I was going to go with Polar white but the soft white looked nice in my kitchen (and looked nice with my floor tiles I already bought that are 17.5" X 17.5" rectified) as I plan to go with LED lights in 3,000K temperature and 1,150 lumens made by TCP, The installer would like his electrician to install LED that are retrofit and include the ring but I like the temperature of the bulb I found as I find 2,700K temperature makes everything more yellow than I like and anything more white that 3,000K is too stark.

Paul_ma how do you like the Xenon Linear? I just saw a home display using it and was surprised how brightly and evenly it lights the under cabinet area with minimal heat. I believe the system I saw was also a Seagull and used 10Watt bulbs. Did you put your lights all on a single dimmer switch? The system I saw used a transformer built into a cabinet but the switch was able to control multiple lighting tracks that spanned several different cabinet walls. I have found that the larger strip fixtures that use Xenon lights still generate alot of heat similar to Halogen, but my impression was that heat was much less of an issue with the smaller bulbs used in linear lighting systems. Do you find the light output to be adequate? Another company I am reading up on that uses linear Xenon track lighting is called Kichler. They have both 5W and 10W bulbs available.