Since everybody else is weighing in, I'll put in my $0.02. I have a 12 cup version of the Cuisinart 'Brew Central' (see link) that was sold through Starbucks. I like it best of all the recent coffee pots I've had (and I seem to buy one every year or so). I think it meets the requirements listed that started this thread, even though it is a thermal caraffe type pot. It is programmable, and easy to use (didn't need to read the instructions). It seems durable to me, but we've only been using it since Christmas. It is definately more durable than the previous low-end Cuisinart unit I was using. It uses a #4 cone filter, and comes with the gold mesh filter. I also use brown paper filters, for easy clean up. The documentation for this model doesn't say anything about a warming plate, but it does appear to have one, or at least the base gets too hot to touch. Pros: 1. It works great! The pieces fit into place, and the drip mechanism doesn't seem overly complex or failure prone. This is EXTREMELY important to me, as I've had WAY too many coffee makers over the last year that over flow, or mis-flow, or get clogged, or something goes wrong, spilling coffee all over the place. The LAST thing I want in the morning to to clean up the coffee that I only want to be DRINKING!!! 2. The apparent warming plate turns off right away, and the thermal caraffe keeps the coffee fairly hot for quite a while, without 'Cooking' the already brewed coffee over time. 3. It's a great size, that fits under our cabinets with plenty of clearance. Cons: a. It doesn't have an externally visible level or gauge telling you how much water to add. You have to look down in the tank at a little 'stair-step' thingie to see how much water you've added. When I'm blurry-eyed in the morning, this is one thing I don't want to have to focus on. b. There is no overflow prevention system, and the tank can hold more water than the caraffe. It is completely possible to put too much water in the tank, which will then attempt to flow into the caraffe, and overflow on the counter. To prevent this from happening, I keep a pitcher of water with the exact correct water level marked on it. This also helps address Con #a. c. I wish the coffee was a bit hotter, and that the caraffe kept the coffee hotter longer. If I'm in the mood, I'll pre-warm the caraffe with hot tap water before brewing. The water I use is room-temperature, so that helps. We had an 8 Cup Thermal caraffe pot that kept the coffee HOT for like 6-8 hours. This one will keep it hot enough for about two hours, but after that it's not hot enough for me. I grind up coffee a couple of times each week for the next few days, and I fill the filter cone up to almost the TOP. I love rich, strong coffee! I use Reverse-Osmosis filtered water, and locally roasted beans from my favorite coffee establishment, and I'm happy with the coffee that is produced. We'll see if I'm still happy toward the end of the year, or if I will feel compelled to buy yet another coffee pot or not. :-) Here is a link that might be useful: Cuisinart Brew Central

laughable - I'm not Chicago Bob, but we had considered something like that at one point when it looked like I might not be able to have my 3rd (top) drawer under my induction cooktop at a usable height...we would have had the front represent as the two drawers, but part of the front would have been covering an area of the cooktop clearance, then the drawer in a drawer would have been just below that...putting the drawer within a drawer would have yielded me the storage area that I needed, even if it was a bit less convenient. If you have a choice though, I would be less likely to do the drawer in a drawer. As it is, my top drawer front for my cooktop cabinet is 6" high (lining up with the rest of the top drawers in the kitchen) and will have a drawer depth of about 2 1/2"...enough for me to put flatter utensils (or some people would put lids) in that area.

The most gorgeous one I know is by Howard Kaplan, called the Europa Arrow Pot Rack. Very french-professional-kitchen looking. Also, check Sur La Table, they have less expensive bar pot racks by J.K. Adams. Sur La Table also has the Enclume "bookshelf racks". And as Gsciencechick mentioned, Williams-Somoma has a couple Enclume wall pot racks. Or go to enclume.com for the Enclume entire line. Here is a link that might be useful: Howard Kaplan Pot Racks

I would not like the drawer as shown, as I think you lose space. I do have (on purpose) a dual rollout, with the lower with more "depth" than the upper (and a drawer on top, as described above). You not only get the flexibility to store the larger pots on the bottom, you can get stacking racks for fry pans and such (I use pan separators). Plus, you gain a few extra inches in the back for handles that extend beyond the limits of the drawer. Of course, your pullouts also extend the full length of the drawer. I have way too much cookware for the arrangement shown above.