We're about to start our bathroom and I just bought a quiet Panasonic vent/heater. (Our other bathroom has a fan that's loud and heater that's insanely loud, and we didn't want to do that again. It seems like the choice is between very quiet and very loud.) I'm concerned about the fan, and especially the heater, being left on, and so was wondering about timers. In my old house I had a clunky mechanical timer for a whole-house fan that you turned, but I didn't want that; I didn't know that there are easier-to-use timers now available. Anyway, I was wondering if anyone had any specific brand/model recommendations? (That Intermatic link is helpful, but I think it's more complicated than we want. A single fixed time would be fine, as long as you could manually shut the fan/heat off if you didn't want all the time to play out.)

Hard to Tell, one possibility is an intermittant problem with the horizontal output transistor, the other is a power supply problem. the first is the most probable, however I would not suggest trying to repair a t.v unless you know what you are doing. Extremely high voltages are present when you get inside of a t.v.( up to 50,000 volts, even if it has been unplugged for awhile. If it is the H.O.T. it should not be too expensive to fix.

Hello Pastapup or anyone...! I note pp that you seem to be educated on the above bhrt and was wondering if this is what you take? I'm considering starting Vivelle Dot and Prometrium cyclically (i've been researching for awhile).. I'm 4 years post meno and early at that.. having my last period at age 44 now 48.. toughed out all the usual suspect symtoms but now 3-4 years into post meno... I've started bad v atrophy, bone loss, bladder issues, libido loss, brain fog..etc. I was just hoping to get some insigh into dosage and maybe what to expect in the first few months.. I have a gyni who is pretty good but she is not a supporter of cyclic method... (getting a period) and yet alot of what I have researched said this is the best way.. Anyway, I noticed your post was this year and thought you might still be around.. as many of the posts I have read are much older... thankyou.

Hi Everyone, I have an old (10/95) craftsman opener that works fine #139.663956 / S.N. 4935A00718 In the past year I have bought 3-4 remotes that I was told would work. But did not ,and since my unit does NOT have a learn button,I am lost as to what to do. The #'s on my remote are in places worn out so I can not see all the model #'s. My wall switch (power) is model 139.53755 . Can anyone offer suggestions? I am disabled and may need someone to help me so if I can explain to them what to do,I may be able to get this new remote programed or find a suitable replacement. I recently purchased a craftsman #139.53778, but with out the learn feature on my unit and not knowing what 9 # code to use ,it to is of no help to me. Any ideas?? Thank you .