Non system disk or disk error Usually means you have a non bootable DVD or CD disc in that dvd/cd drive & that drive is your first accessed drive as configured in the bios settings.

I'm just seeing the new replies now, thank you again for the considerate comments and the appropriate 'vampire' responses. I have also considering asking the guy if he was emotionally scarred from a traumatic plantation shutter experience as a child. I really need to brush up on my sarcasm with him. I have some sweet friends as well but none of them enjoy decorating so yes, dianalo, it is a nice boost to get the support from this forum :) Gam51, I bought the shutters through our Home Depot, and they contract out to a Denver company called Duratex so they are manufactured close to where we live; they have been a great product but I don't know if your HD would use a different company in your region of the country. I priced out cutting my own rods from BB&B then found these ones cheaper than DIY at JCPenney on clearance.

I HAVE THE SOLUTION! NO NEED TO BUY A NEW FAUCET OR END. I stumbled across this (and your thumbs down thread) when trying to figure out why my ikea pull out kitchen faucet had such poor flow. It wasn't even enough to trigger the tankless water heater. I went to Ikea and while there brought it up with a kitchen specialist who denied all knowledge of a problem or that a flow restrictor existed. I said that's impossible as FR's are legally required in my state. But it was the way she denied all knowledge that got me thinking there's something more to this, and VOILA! I solved it. Here's HOW TO REMOVE BOTH (YES, THERE'S TWO!) FLOW RESTRICTORS IN AN IKEA FACUET. 1, On the pull out spout you'll see indents for a wrench, let's call this part the hose coupler. Now It's the actually the larger cylindrical spout part below it that you need to get off, so grip tight and unscrew it away from the house coupling. 2, once you have the spout end free. you'll notice that it's a metal cover with a black plastic part inside. Push downwards gently on the screw thread and the plastic barrel will come out of the housing. It's this part that aerates the water and has the flow restrictors. At the bottom of this barrel, you'll see the grey part with little teeth around the edge (they look like battlements on a castle). If you still have the green key that came with the faucet I think this should unscrew it. I lost mine so instead unscrewed this grey part with a good quality flat head screwdriver, pushing against one of the teeth in a counter clockwise pressure. Be careful not to cut the tooth as you push it. If you won't budge, move on to another tooth and try again. Don't use a very sharp screwdriver - I used the flat wide one in a Swiss Army Knife and it was perfect. They grey part will unscrew and on top of it, you'll see a little white mech and underneath that, something green. That little white mesh is a cap that sits inside (not on top) of the white ring housing. Pry it out with a little knife, it'll pop right out and inside there is FR number one - a little green devil, that sucks the pressure from your beloved faucet. Pull it out and put the little white mesh cap on. Now look up that plastic barrel - you'll see theres a white/beige contraption with a spring. Yoo can either push up from below to pop this out with something like a pencil. or get that flat screw driver again, and from the top, angle it under the lip of this little contraption and while pulling up, turn it in your hand.It's only held in place with a rubber O ring so should slide out. This little contraption is a pressure regulator and will also affect flow. 3, Now, screw the grey part back in, and then slide the metal cylinder cover over the barrel and then screw the spout back in to the hose coupler. DONE. You know have virtually full flow back. It will be at the price of that aerating feature, but I just want as much pressure as possible. I did not try putting the pressure regulator back in, but someone else out there may want to try. I hope this helps and please feel free to comment with any questions If you need.

If anyone is willing to sacrifice their tomato and has more than 55 needles inside it, I'll send 'em a new pincushion. And all my hidden needles looked new, shiny and bright and no rust, so apparently sawdust does a great job. The little strawberry full of emory is supposed to sharpen and de-rust needles and pins, but I think the sawdust does, too. The threadcatcher is just a little independent bag, it goes where ever you need it, like a tiny portable wastebasket. I have a tall urn next to one machine that I use for a wastebasket, but the other machine is alone in the world, so I'll be using the threadcatcher there, mostly. I have a sewing caddy with a removable bag for scraps on the sofa arm so I won't need it there. It'll probably stay upstairs next to the machine. I also have one that slides under the serger to catch trimmings but it doesn't get used much. Spicey, when I worked for the vet, his wife came in late one afternoon, she had stepped on a needle and the eye portion was stuck in the bone in the ball of her foot. I had seen it all, broken bones, eyeball injuries, surgeries, etc but that one, the needle in the foot, gave me the heebie-jeebies unlike anything other (besides maggots). I guess I was too empathetic, I couldn't stand to watch him numb his wife's foot and pull on that thing, after x-raying it. *shiver, shudder* I never did figure out how she drove herself in. *more shivering and shuddering* So I feel sorry for your little dainty foot! Sammie will not be modeling any couture for us, it was shocking that he let me put the hat on him in the first place. lol He's a spooky little guy, HATES the sound of a plastic shopping bag, and hides over the least little thing. The trauma of a jacket would just do him in! :)