Cheap things that end up expensive

18 years ago

This is the opposite post of :

"Expensive things that end up cheaper " .

My DH always told me - penny wise - dollar foolish. Boy ,I've leared that lesson hundreds of times over in my lifetime. I've always bought Cheap . Used. On Sale. Second hand. ( Trying to pinch that penny !! ) There's just somethings that aren't worth skimping on. I have too long of a list to post - but a couple things that stick in my mind were - a box spring and mattress. Oh Yeah - went to the sleazy warehouse bed & mattress place because they has " Blow-out prices ! " Got the bed home ... assembled it -- and the box spring SQUEAKED so loud - we couldn't sleep . The mattress sagged more than an 80 year old stripper. AWFUL !! We ended up buying a whole new set at a GOOD STORE.

( Double cost ) We bought a "close out ceiling fan " ... took it back and exchanged it 3 times because of fitting problems. That sucker Finally shorted out a bunch of wires in this old house & we ended up having a contractor re-do al lthe wiring in the house. Gulp . Oh yeah .......a closeout $50 fan costs us thousands.

I've learned alot of lessons here. Don't get me wrong --- I really have had alot of good luck with used or clearance stuff - it's those one or two things that make you kick youself in the butt !! LOL Any stories to relate ?

Sort by:Oldest

Comments (8)

Jonesy
18 years ago
We always bought cheap box springs and mattresses and never regretted it. As a matter of fact I did buy an expensive Simmons a few years ago and it was the worst one I have ever had. I don't buy cheap when it comes to mechanical things like clothes washers, dishwashers, etc.. I usually buy a medium priced or better. I buy the best Whirlpool dishwasher to get a quiet one. I think your experience as you age, helps you know what to skimp on.
joyfulguy
18 years ago
Canadian Dollar costs US$1.01 today.

Cdn$1.00 increase from about US85 cents in a few months recently sure has had a drastic effect not only on US holdings ... but foreign ones with the portion of their stock based in New York, as well.

Ouch!

ole joyful
Related Discussions
Choosing an architect for a cheap/expensive build
Q
Comments (14)
I would like to point out that the homes with fancy trim and cabinetry make for fabulous website pictures. A guy might have great experience in green building, but that doesn't usually photograph well. So you really are going to have to talk to them. A piece of advice we were given when we bought our land was to not look for an architect, but to look for an architectural technologist. As a gross generalization, architects usually do office towers and shopping malls. The technologists do houses. When an architect does houses, they tend to be huge showpieces. As a result, not only are the technologists cheaper, but they are better with the details of houses seeing as it's their specialty, and they have a lot more experience with more modest houses. We ended up with an architect, because we found one that actually likes doing houses, and his price wasn't much more than an AT. I kind of regret hiring him, though, because he's so busy with his commercial buildings that we're an after thought. He tends to forget that we're trying to be economical here, and he spec's crazy things that people don't put in houses. Like 4' wide exterior doors. We went to get quotes, and found that we'd have to have all our doors custom made. We asked why the doors were so wide. Because DH made a comment that he wanted to ensure that we could get furniture in the house. So even the man door on the garage is 4' wide. There's also a 16' wide garage door into the same space.
...See More
Most expensive thing in the bedroom - a rug?
Q
Comments (18)
Pal - where, oh where, are those gorgeous things? I love the cube shape with the curved lines, it is awesome! Anele - $89? That's a steal, where are those babies found? This exercise is really good for me because the more I scroll through the thread & revisit the moodboard with all the options, the more I really like R. L (the white, square one) is starting to feel like a "too safe" choice, like I'm not really committed to the style of the bed and am trying to dilute it in the room. I do love the true vintage teak furniture I've seen, but a lot of it has aged to be more orangey-toned than what will look good with the bed & the cool greige of the walls. The 2 Pal just posted look like they haven't developed as deep of an orange tone, so they might really work with the bed.
...See More
cheap vs expensive sinks
Q
Comments (39)
Mary04 - in response to your post, as Brickeyee and I wrote above, we believe it is preferable to get a lower gauge. Others may have a different opinion. But I am unclear why you say you had trouble finding a lower-gauge sink to fit in a 30" cabinet. You didn't say whether you were looking for a double bowl or a single bowl. But in just a 2-minute search, I found 16-gauge stainless sinks that fit in a 30" cabinet. There is the Kraus KHU100-30 single-bowl sink, which by previous reports on this forum, is a beautiful sink, price includes grid and strainer, and it has an offset drain which is nice to have (my link below has 41 great reviews). Also, Ticor offers 4 variations of double-bowl sinks that fit in a 30" cabinet. As an aside, I don't know if you are looking at a single or double bowl version, but if I am looking for a sink to fit in a 30" cabinet, I would choose a single bowl sink, so that you have a bowl big enough to set down a roasting pan or cookie sheet. Kraus KHU100-30 16-gauge Single-Bowl Stainless Sink Ticor 16-gauge Double Bowl Sinks (use the search function for 30 inch cabinet size)
...See More
Expensive vs. Cheap subway tile?
Q
Comments (4)
There's been a thread on this a few years ago (maybe more recent too). Some differences of opinion but the conclusion I drew was to stay away from subway tile from Home Depot. People had the same story we hear over and over about home Depot, that their products often are made exclusively at a lower price by brand name manuacturers - better to pick a brand name and go to THEIR warehouse - my contractor bought Daltile directly at a very very low price. I've only had it for a short time but it looks beautiful. I thought it was a small thing I could do to encourage the possibility of a quality that would be better than if I bought at bottom basement prices from a big box store. On the thread I'm thinking of, stories varied. In some cases the tile was obviously made specifically for Home Depot. In other cases, it was hard to tell. I just took a safer route for a price that was not much more (can't remember exactlyn- but probably changed by the time you read this anyway). YMMV Good luck.
...See More
linn_z
18 years ago
The last mattress and box springs we had lasted about 15 years and is still good enough to use. it's in the guest room. This new set we bought when we had this house built less than 2 years ago, a cheap set from American Furniture, a big outlet chain here in Colorado. There's a ridge in the middle and two depressions where we sleep. This thing isn't going to last long at all.
jannie
18 years ago
We bought a sofa at a clearance store about 15 years ago for about $700, and it's still going strong. I keep a sheet thrown over it during the week to keep it clean and free of pet hair. We had a minor fire and it got singed, but we found a furniture repair guy who took the fabric off the back and fixed it beautifully.
cynic
18 years ago
I've had "cheap" things that lasted forever it seemed, cheap things that didn't last minutes.... I've also had EXPENSIVE things that seem to last forever, and also I've had expensive things that died quickly.

I've learned to look for quality, not price. I shop for value. I make mistakes now and then, my $500 van is at about $5000 invested after three years :( but then again, it gets me around just as well as a $30,000 new van would so it still comes out to be the better value.

I hate the term "cheap". It's a subjective term. In another thread someone mentioned "cheap tires" were a bad value. I disagree. Michelin's top line tires for $35 each were "cheap" tires, but excellent value.

When I bought tools, I learned quickly to look for the value. Spending more and getting higher quality is often worth it. OTOH, for a pair of pliers to serve a light duty job, the dollar store version work fine. Fit the cost to the need and get value. To buy a $20 pair of pliers to have in the drawer for occasional use is not a good value, though many would say they wouldn't mind spending the money there. But when you make your living using those tools on a construction site or as a mechanic, having the Brand X often is a poor value.

Oh, and FWIW, to me, a $50 fan is not a "cheap" fan! I paid half that for the one in my kitchen. Installed it about 20 years ago and it's going strong. Quiet, efficient, and had the fourplex light unit included.

Getting value requires some research, some knowledge, some common sense and reputable vendors. I'm not adverse to buying used. I realize that you win some and lose some, just like buying at a store. Sometimes you can bring them back to a store, even though it costs you. So there's no perfect solution.

And no offense, but I'm curious.... did the FAN cause the shorting, or did improper installation cause it? I'm not sure how a properly installed fan could short out other wires in the house. If the fan itself shorted, the fuse/breaker would pop.

Oh yeah, speaking of beds, I bought an expensive, good name one at a "closeout" though IMO was still very expensive and I've hated it since I got it. I get backaches from it. Too firm. Usually mattresses work in a little, this didn't. I want to get rid of it, but not sure what to get. Possibly an air mattress, but I'm hesitant of the mold issues, or a foam one which I've always liked since I worked in a furnature store as a teen.

Maybe I'm fortunate, I like to think it's because I shop for value, but I really haven't been "stung" on many things overall. Generally I will say that buying a slightly better quality than I planned is usually a good investment but there's no hard and fast rules.

So now that I've walked in circles... I'll move on! :) Happy shopping er, value hunting, all!
newgardenelf
18 years ago
Cheap nylons end up costing me money because they always run...I buy better quality stockings/tights and they last much much longer and no embarrassing runs........... they have the added benefit of being thicker,darker so I also don't have to shave my legs as often which saves me time and money :) sorry guys if that's too much information
flgargoyle
18 years ago
cynic- Look into getting a 'miracle foam' mattress topper before you buy a new mattress. I just slept at one at my mother's for a week, and I can't wait to get one. It's about 2" thick memory foam.
cynic
18 years ago
flgargoyle, thanks for the suggestion. Actually I used to use a featherbed on top which was really nice in the winter. Turn down the heat, and crawl in there with flannel sheets and a down comforter! Comfy! And I got one of the foam toppers you mentioned from my sister a while back. It does help. She had one and liked it so she bought me one. (She bought two bed sets at the same time I got mine! LOL) I'm not sure if she dislikes the bed or not. She's talked about a new one, but she talks about buying a LOT of new stuff! LOL

Cheap things that end up expensive

Comments (8)

Jonesy

joyfulguy

Related Discussions

linn_z

jannie

cynic

newgardenelf

flgargoyle

cynic

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US