I believe this is a standard cut requiring normal stone cutter skills. Your sink probably came with a template for the granite guy to use to make the sink cut out. In your case he would cut away just a bit more to give you a positive reveal. The only trick here is to be sure that your sink has sufficient lip to both have some exposed and to have enough left under the granite to secure the sink to the underside of the granite. In our case we sent our entire sink in the shipping box with the fabricator so he would make whatever measurements he needed. This should not be a big deal.

Not a Chinese tap and die set Konrad. But thanks for the input. For more information, I am trying to put more threads on an axle for a skateboard truck. I have noticed that the axle is slightly larger than that original 5/16 threads. I was able to add more threads but the newly threaded area still seems wider than the nut. I have also tried tap on the nut with no effect.

I'm sorry, but fabrication is expensive and these countertops are expensive and so I don't see how working with a customer to make sure they like the templating is "donating time." Are you saying that people spending thousands of dollars on countertops should just take it however the fabricator decides (which would likely be whatever is most convenient for him and never mind how it looks in the end or if the customer likes it)? There are several people in the trades on this board who seem to have rather dim views of their customers. I don't understand this because you make your living off of these people. I do understand that some people are more difficult than others, but that's how it goes, right? I interact with my clients every day that I'm at work. So, I do understand how some people can be, but...there are so many threads on here with photos of stuff that's really not acceptable. My Dad worked in construction. He did work for both general contractors and for individual homeowners. He took pride in his work, did a good job and wanted his customers to be happy with the work he did. He had no problem taking time to make sure these things happened and he worked REALLY hard, often in unpleasant weather, to produce a good quality finished product. I never heard him complain about anything...not the heat that he worked in over the summers, the lack of bathroom facilities on many of his jobsites, the condition his job left his hands in, etc. He never complained that his customers wanted a good job or that he had to spend time with them. He also didn't gouge people or charge more when he was busy. He didn't call any of his customers a PITA or try to charge anyone a PITA fee or anything like that. I see many tradesmen, contractors, etc., these days, who seem to have really big egos, look down on their customers, try to take advantage of customers whenever they can, who feel entitled to be paid a lot of money for a minimum amount of work (or poor quality work), who refuse to take hard jobs because they are only looking to do what's easy, and who take no pride in their finished product. I'm not saying this is anyone here, but I am saying that you often seem pretty quick to criticize the customers, who are paying a lot of money and who mostly just want a good job in exchange for their money. Overall, I've been very disappointed with most of the people I've hired to do work on my home. No, I've not hired anywhere near the cheapest guys and, yes, I've been willing to pay for someone who does quality work. You can jump to calling me a PITA, if you want, but then we could talk about how much I've paid/been willing to pay (much more per hour than my husband or I have ever earned and we make a decent living) and I have photos to show the poor quality of work these guys have tried to leave us with. We could also talk about the way some of these men have acted in my home (regarding bathroom facilities that I provided, the use of my refrigerator/icemaker, etc.) and about the shocking lack of any work ethic (sheer laziness and lack of any pride in their work, not caring about the quality of their work and trying to take advantage of us in many ways, including by trying to pass off horrible quality work as perfectly fine/a good job) some of them have displayed. We could also talk about the various lies we've been told by multiple people we've talked to about doing jobs. Thank goodness we know enough to mostly prevent ourselves from being taken advantage of... Then, we could talk about the experiences of a good friend who is a single woman and how everyone she has hired over the past 15 years (and she's paid them a LOT and has never tried to hire anyone on the cheap) has basically taken advantage of her, charging a LOT and then doing subpar work. Things have changed, and not for the better. It seems that you can't trust anyone these days. I'd NEVER pay thousands of dollars for new countertops and then not be present for both templating and installation. If someone tried to charge me for that, I would find someone else. If I couldn't find someone else, I'd put in countertops myself (tile, butcherblock or maybe cut soapstone myself--which is what a family member did and it looks beautiful) before I'd allow myself to be treated that way.

Im having a tough time with a lot of my cuttings specifically from bougainvillea. The cuttings will put out leaves and I think to myself all is well but then start to die off again without me changing anything about the environment. My watering and the humidity some remain the same. I know for sure no roots have formed yet since it's too early but I would think that I'm doing the right thing at first since leaves are forming. Once some leaves start to grow does that mean i should start to tone down the watering and humidity? what do I need to change about he environment?