Get the Pavers Ready! The Unilock pavers that have been sitting in my driveway for months got put to use today. The wall crew switched gears and compacted the final rough grade before jumping on the pavers. These are the Umbriano that require a little different install (No Poly sand). The PB also finished tile today around the spa. If all works our we will be swimming by Aug 1 :). The only kink today was the wait for electrician for the deck bonding which is a grounding wire 4-6 inches below grade 18 inches from water line. It's throwing off the paving somewhat as the crew can't build the deck right up to the pool. That's getting installed Thurs morning with an inspection hopefully end of day. Entry way to Pool I think the crew is excited to get a break from building that wall Final Tile Placed in Spa My Daughter has Little Fun with the Paver Sand

Hi gang: Well I have been out of town for a few days and believe it or not between the rain and being out of town, I have yet to take my first swim. The kids on the other hand have to be extracted with great force at the end of the day. My sons party went as planned, one short rain shower, but otherwise great. The water is now fairly balanced, they started the polaris (thank goodness..the dust was insane!), they plan on starting up the salt system in about a week. birdbath, I see you have been absent also....must be living in that water....thank you for the compliment, but yours is still the coolest pool I have ever seen. Moo....thanks....we are planning to build up the area behind the waterfall, make it into a berm with plantings and lots of color. We are also going to use river stones in that area....and behind that will be the completed extension of the wall. Should be starting that in the next 2-3 weeks. Smb....agreed our colors do look alike, it still amazes me how it changes throughout the day. I think we ended up somewhere between midnight blue and tahoe blue. Thank you, love yours also...are you getting to swim or does it still belong exclusively to the puppy ;) Well, I have the weekend off...so I think today will be first swim...its 89 out there and the water has warmed up to about 82....here are the pics in full sunlight for Birdbath. oops...heres the waterfall on....

Day 4 Build (Day 6 calendar) - Gunite I'm a little behind with the progress updates. Going into gunite, we were worried if a few things were going to turn out right. And then inspecting the pool afterwards threw us into a wave of second guessing some of our decisions and designs. Gunite in process Gunite Completed So, here are the things that we fretted over. Tanning Ledge Step location - we moved the steps from far driveway end to the middle. I think it looks much better plus it didn't make sense to have steps going into the deep end. Tanning ledge edge - after moving the steps, we didn't think to extend the tanning ledge. Doh! Bubbler location - managed to get it in. Originally had it in the far flat area but then moved it to bottom of the beach entry. And what's with the return sticking up from the middle of the beach entry? We originally wanted a return that came back across the beach entry to keep it clean. I looked at this and thought they are giving me a bubbler return. But then they said they put an angled jet on the return so it sweeps across. Do you pool builders ever get annoyed with our questions? Beach entry angle - it seem too steep. I'm not sure what my options are. Maybe we can flatten the slope and angle it back into the deck? Would this comprise the pool beam integrity? Weeping wall and moss rock below water line - we wanted the rocks in the water and not above the tile line. I thought they were going to build a ledge into the beam to support the rocks. Instead they angled the beam down. I was told that this is preferred since it can accommodate bigger rocks. Reverse beam - In this area, they also transitioned from the angle too late. We should have more beam and less rock. I was told that they can address this with the rock guys. Deep end step out - We had a seat in the deep end. We thought it would be good to add some steps to make it a deep end step out. I think this turned out well. Spa Oh, where do I begin with the spa? Size - dang this thing looks huge. It seems more like a small wading pool! And it looks really high. I remember making sure it was 18" (vs 12") so that it would be a good seat height from the deck. It just looks like a castle turret now. Multi level spa seating - managed to get a section 21" deep as I wanted to be fully seated and submersed. Never did measure the length of my upper body... Seating - they did a horseshoe seating arrangement. Seems like the wall along the spillway is just wasted space. This was to prevent playing footsies with the person seated across from you. Spillway - we didn't spring for the fancy spillway. Nor did we cut it open as we were hoping the notches would give us a scupper effect. Now I wonder if that was a wise choice. Again, castle turret... Piping - What's the deal with the piping outside the gunite? I know it'll be covered up with the mortar and veneer. Should I be worried about this kind of stuff? In pool table We thought this was a cool idea. Being able to have a drink or a meal while sitting in the pool. Well... Pedestal placement - I posted before that the pedestal had to be a mere 9" from the pool wall to prevent the cleaner from getting in there. I thought that was too close. In actuality, there's no problems. The pedestal itself is very small and the corner seating is wide so it's not like having to shuffle into booth seating at a restaurant. We are planning on using one large oval piece of rock as a table top. Table height - now this is where we didn't think it through (or the PB didn't educate us). The table is going to be at water level. They did standard in-pool bench seating. So it appears that when I sit on the bench, the table is going to be up to my neck! At this point, they can't raise the seat with gunite. The only thing I can think of is adding a layer of flagstone to the bench seating to raise it up a few inches. Any other ideas? Of course we also changed our tile selection for the 3rd time and made some last minute changes to the light locations. All of which I hope were the right decisions. Anyways, enough of my rants. It's good to document this stuff as I'm sure my wife is tired of hearing me talk about these things. Sounds like I'm just a worry wart. We're still very excited and can't wait for the pool to be all done and the backyard mess all cleared up. Cheers! Here is a link that might be useful: Day 4 - Gunite

I would replace the brick coping with a natural stone with pieces a minimum of 30" long. Lose the boulders. I see the patio is natural stone. Use natural stone again, but opt for larger pieces. The numerous joints make it look too busy. Replace the tile with glass tile. If you choose natural stone on the raised wall areas, make sure the stone runs below the water line. I see a lot of pools where the stone runs down on top of the perimeter tile. To me, it looks really cheesy. I noticed the spa's bench had tiles along the edge. When we put tiles along the edge, they are generally 14"-16" apart set in a diamond configuration. Right now, your spa looks like a public spa. Sorry. We set the tiles the same way on step edges and benches as well. Lose all the brick on the steps and use the same material for the pool coping on the step treads. One piece treads-no joints. Only at the ends. The interior finish can be in the gray family of colors. It's best to choose several tile and plaster finishes, set them outside next to each other to see how they look in the natural light. Plaster colors change when wet, under water and at different depths at different times of the day. See how your coping material ties in also with other materials. Look at finished pools by your contractor to see them in real time.