Never MT vs. other soap dispensers

11 years ago

I am confused about this.

A Kraus sink/faucet combo I ordered for the clean-up sink had a soap dispenser included.

I have read time and again on this board that Never MT is the next best thing after sliced bread (well, almost). So, I went to Amazon to order it and I cannot figure out why it is better than any other "built-in" soap dispenser.

Could you please explain?

TIA!

Featured Answer

talley_sue_nyc

5 years ago

I found that I needed a longer hose, because the trash pullout completely fills the area directly under the dispenser.

I begged them to sell me one with a longer hose, and they did. But then for some reason I switched dispensers, and I ended up just buying a length of plastic tubing from Home Depot and cutting it to fit (I took the dispenser mechanism to the store with me to be sure I got the right size).

My dad's dispenser mechanism broke recently, so I bought a new one for him and discovered that the hose that was originally there (I'd set my mom & dad up with a NeverMT as well) wouldn't fit, so I did the same thing for him--just bought the clear host from HomeDepot.

I don't care that it's supposedly "easy" to fill the dispenser from the top--who wants to refill the darned thing every two or three weeks? I buy a mega-jug of soap, and I put it under the sink w/ the hose, and I never think of it again for about a year.

(I installed a screw-hook in the side wall of the cabinet, and I hang the jug from the hook using a "chain" made of zip-tie loops. This suspends the jug above the cabinet floor, and then I can use a deep pullout on the floor without the jug blocking the way)

Sort by:Oldest

Comments (18)

breezygirl
11 years ago
NeverMT isn't a soap dispenser. You still need to purchase a soap dispenser. NeverMT is a tubing system attaches to the bottom of your soap dispenser instead of using the bottle that comes with your dispenser. Tubing goes from the bottom of your dispenser and into a large bottle of dish soap, hand soap, or whatever soap you'd like to use so you don't have to refill the small soap bottle that comes with your dispenser.

I'll link it below.

Here is a link that might be useful: NeverMT with photos
eleena
Original Author
11 years ago
Breezy,

The one on Amazon sold by KitchenSource is ~$56 and includes the dispenser. The one you linked is only $10. I take it does not include the dispenser. Do you know if it is the only difference?

It seems that I could an additional kit to be used with the Kraus dispenser I already have, no?

Silly, but I find it hard to visualize and I know that after I see, I'll be surprised that I did (find it hard).
Related Discussions
Never M-T with Danze dispenser?
Q
Comments (2)
Ooooh - good to know. I am going back and forth between the Danze Opulence line and the Delta Victorian line, and a soap dispenser should work properly. I do not know the answer, but thank you for posting this.
...See More
Does the Never MT work with a soap dispenser from Lowe's?
Q
Comments (3)
I'm afraid I can't answer your question but can tell you what I learned when I ordered one several weeks ago. I called the website to see if their device would be compatible with the Brasstech SD that I have. The following day I received a call back and was told that they were quite confident that it would work with any SD that I had and, if it didn't, I could return it for a full refund, including shipping. There is only one part of this device that needs to be compatible with your SD: the tubing running from your SD down to the bottle of soap you keep under the sink. That tubing must slip tightly over the stiff plastic pipe that descends down into your existing soap bottle. The only other compatibility issue that you'll face is ensuring that the grocery store soap bottle is threaded and sized to accept one of the caps that they send you, through which the tubing from the SD runs. But they send you five or six caps (you store the unused ones on the tubing in case you change brands) so I would doubt that will be a problem either. I was impressed with this product. It's incredibly simple in concept and they're probably making a killing on it. But it does what it says it does. How often have you bought a product that does THAT??? Bob
...See More
the inevitable soap dispenser thread - diy never mt
Q
Comments (5)
Sure, kks! And I'll do you one better: we have a Hansgrohe Solaris high-arc in Steel Optik and the LDR pump in "stainless steel" finish looks great mounted next to it. Take a look at the attached pic. Here is a link that might be useful: LDR soap pump
...See More
Kohler soap dispenser and Never MT
Q
Comments (12)
the Never MT instructions that a kind soul here had scanned in (I apologize for copying only the instructions and not the person who posted them!) has specific instructions for Delta dispensers having a vent hole. Perhaps Kohler has changed their design to be similar? from the scanned installation instructions: 3. For Delta pumps with a vent hole, soften the clear vinyl ring in warm water and press onto the pump assembly and up to the collar to cover the vent hole. HTH
...See More
breezygirl
11 years ago
I haven't seen a combo dispenser and neverMT on amazon. If you already own a soap dispenser, then buy the cheap kit I linked. Or DIY your own. If you search this site, you'll find descriptions of how to do it. I knew that's would probably take my DH about about 96.766 months to make mine, and I didn't want to fuss with doing my own. I have enough to do. So I bought mine.
eleena
Original Author
11 years ago
Thank you!

My DH wouldn't even attempt it, especially with $10 being a price of a sandwich, LOL
francoise47
11 years ago
Just want to chime in to say that after 18 months in the new kitchen we finally decided this week to install a Never MT.
We were tired of hitting our head as we crawled under the sink every few months to refill the soap dispenser (from under the counter) We got the Never MT for about 10 dollars online. It works perfectly with our Rohl soap dispenser.
eleena
Original Author
11 years ago
OK, sold!

The Kitchen Source version confused me. However, their dispenser looks decent, I am get it in addition to whatever faucet I decide on.

Tx!
a2gemini
11 years ago
I want one also! Just have to get over the shipping costs....
twomartins
11 years ago
I liked mine so much I put one in the kitchen and at the utility sink. And now that I realize I can I am considering taking it out of my old house when I move!!!
oldbat2be
11 years ago
Buy multiple and give the extras as gifts as guests rave over what you have...good luck!
eleena
Original Author
11 years ago
Oldbat2be,

Good idea but don't they have to have a hole for the "built-in" dispenser?

Also, does anyone know if I can have an additional hole cut in my existing granite vanity countertop to install a soap dispenser?
Nancy in Mich
11 years ago
When I asked DH about installing a Never MT in our new kitchen (our second), he pointed out that all you have to do to put soap in the dispenser is unscrew (or just pull out) the pump part from the top and squirt the soap into the bottle. He doesn't see the reason to fool with the Never MT tubing again. I tried it, and he is right.

Anybody else have a soap dispenser that fills this way?

Anybody have one whose spout is long enough to actually clear the edge of the sink? Ours drips down the side of the sink, so we rarely use it anyhow!
breezygirl
11 years ago
Nancy--most, if not all, dispensers fill from the top nowadays. I did that for years and can't stand it. More often than I not I overfilled and had to clean up a mess.

I've had two different models and brands of soap dispensers. Both have cleared the side of the sink just fine. I carefully selected my current dispensers with spout length in mind. Most specs I looked at had spouts long enough, but there are a few stubby ones on the market.

Soap dispensers are one of my favorite things ever!
threeapples
11 years ago
Will this work with any model dispenser?
Holly- Kay
11 years ago
Thanks for the link breezy. I bought three and will get a fourth free.
Lake_Girl
11 years ago
I agree. I fill my from the top, and it usually leads to a mess. I'm going to get the Never MT!
lyfia
11 years ago
I used to fill mine from the top and got the mess, both from pulling the tube out of there and from spilling while filling. The neverMT is very nice since I now buy the mega size dishliquid bottle and just use that and don't have to worry about it for about year or more.

I need to get a new pump though. I don't think mine does a good job of holding the dish liquid in place after some time. Say in the morning I have to do a lot of pumping before anything comes out. However it holds it long enough so if I use it a lot it doesn't do that. I think that is an issue with my dispenser though and not the NeverMT.
HU-95481049453
last year
How long was your hose did it work ok. I need 65 inches!

Never MT vs. other soap dispensers

talley_sue_nyc

Comments (18)

breezygirl

eleena
Original Author

Related Discussions

breezygirl

eleena
Original Author

francoise47

eleena
Original Author

a2gemini

twomartins

oldbat2be

eleena
Original Author

Nancy in Mich

breezygirl

threeapples

Holly- Kay

Lake_Girl

lyfia

HU-95481049453

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

Never MT vs. other soap dispensers

Comments (18)

eleenaOriginal Author

Related Discussions

eleenaOriginal Author

eleenaOriginal Author

eleenaOriginal Author

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

eleena
Original Author

eleena
Original Author

eleena
Original Author

eleena
Original Author