This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

bullielove and motherof3inct - Yes, the Linen Cabinet was also built custom and to match the vanity - drawers same height and same wood/finish. The original Linen Closet had an 18" bi-fold door, which really only opened about 15", with wire shelving inside. The door was standard 80" height. We opened the width to 24" and the height to 96" for this cabinet. It is free-standing, though anchored, and the frame is scribed to fit as if built-in. Appreciate your kind remarks.

Thank you all..Spoke to my husband & he likes the Tile on the right with the subway (same one I like). So here is our hopefully final choice. It has more movement on person & is not quite so light. I also asked my kids for fun..they are 9 & 5. My 9 yr old son asked if they made a shiny metal tile & my 5 year old daughter wants a pink & purple bathroom. So much for their help ;)

Hi Bernadette, Maybe these custom wall sconces from our parent company, Lusive Decor, may work for the space above the mirrors: Onde Wall Sconce Balestra Wall Sconce Thompson Wall Sconce Or if there is a specific type of sconce you're looking for, our parent company may be able to replicate it. All that is needed from you is a picture of the fixture that you'd like to be made, the desired specifications and quantity and have it sent to LDSales@lusivedecor.com and a member of the Lusive team will be in touch with you to walk you through the process. Lusive Decor specializes in making fully custom light fixtures catering to the high-end luxury hotels, casinos, resorts and spa's with active & repeat clients that include MGM Grand, The Marriott, The Wynn, Hard Rock Hotel & Casino, and several others in the hospitality industry. We hope this information will help you make a more informed decision on your home needs. Very Best, Tai Truong Elements of Design 3400 Medford Street Los Angeles, CA 90063 tai@lusivedecor.com www.elementsofdesign.com