My choice in that situation would be a Miele speed oven. Costs even more (cheaper H4044 model is $2200), and requires 240V, but it is well reviewed here and elsewhere. I was going for that, but then I ended up with a range plus a combi oven, so couldn't really justify another oven.

We own a cluny. What I think you need to ask yourself, is how much do I need each of these items. From your list, to my mind the least required would be a warming cupboard. We haven't had a microwave for ten years and interestingly, don't seem to miss it. FWIW, having a microwave at undercounter height doesn't seem any worse than an oven undercounter.

I did that exactly, ellessebee. I have the 240V OTR Advantium mounted above the counter. I also have 15" wall cabinets so it fits and works like a charm. I don't think there are any differences in the cooking features between the wall oven and OTR models. The oven cavity is pretty big, because I can fit a half sheet. There are two considerations you need to keep in mind. 1. The OTR does need to vent, because it performs a cooling function after using the non-MW functions. I have mine blow out the front, above the door. In hindsight, I would have run some duct up and over to the adjacent rangehood. 2. The door needs and extra inch of clearance on the hinge side (left) to open. When the contractor first installed it, the whole unit was flush with the cabinet and looked awesome. He was so proud of himself, as was I. I went to use it later and couldn't open the door. It also blocked the exhaust in the front. He had to come back and reinstall it by tacking 2x4s (actually measured 1.5x3.5) to the back wall and then installing it. Now it all works beautifully, while taking a slight hit in the aesthetics. Another benefit to mounting the OTR model OTC is that the underside is heat and moisture resistant. So my coffee maker has a permanent home under there where I don't have to worry about the steam damaging the undersides of the cabinet. Oh, and the built in light of the OTR serves as task lighting for the area underneath. So I also saved money on lighting there. This post was edited by jscout on Mon, Jan 28, 13 at 13:26

I don't know the answer but I am curious. if I were you (and having the benefit of hindsight) I wouldn't hesitate to call any of the Miele USA "Experience Centers" and ask to talk to any of the design staff. If you are in the US start with the Princeton, NJ center, their US headquarters. Even better if you can get to a center. The staff at these centers are a world apart from anyone you'll encounter at any appliance dealer, they use the products for demos and classes and typically have the appliances in their own homes. And it's their job to know the details on what you are asking. And report back and let us know. P.S: A little searching and I found this: https://www.mieleusa.com/media/ex/us/PressReleases/2021/9.2021_Generation_7000_Launch.pdf. Food View sounds interesting. There's also this thread: https://www.houzz.com/discussions/6229141/miele-7000-series-speed-combi-steam#n=10 Advice on calling the experience centers still stands.