Ceiling fans -- the key is to keep 'em moving! It's harder to see the dust then. LOL! :) Yep - As sheilajoyce said, it's important to get a granite with lots of pattern and swirls if you want to hide anything. Also, we polished our granite once when we had it installed and again about 6 months later. It's been 3 years now, and we haven't done it again (I'm SOOOO ashamed... not!) and it's fine. I don't notice any stains or marks and it's still shiny. Yay! The only thing I had to learn to do was to not set a glass or dish down on it very hard. There is NO give like on a laminate countertop with a plywood underbase. I went from a vinyl floor and laminate counter kitchen to a ceramic tile and granite counter kitchen -- it took awhile before I adjusted! At least it's an excuse to buy new dishes since I chipped several of mine before I got used to it (plus, I think my sister and neice chipped some too when they lived here -- again, inexperienced granite counter users!). Enjoy!

I think they can go well together as the grey solid one picks up the meduim grey color color of the island stone. I can't comment on the appropriateness or not of your stone choices 'going together' because I don't know what your entire color scheme and style is. But I'm sure it will be stunning. I personally like the darker stones. Regarding your question as to the finish, I have lived with all types of stone countertops with a variety of finishes. And I've been doing quite a few different ones in my own remodel. Polished is generally the easiest to clean and will also show the most brilliant colors, and have the most contrast, against the same stone in honed or leathered. Look at the stone yard for ANY slab that has both a polished and a honed version (or polished and a leathered version).The most brilliant color will be the polished one. Also if there are any crystals (which I love having in a stone!), they will jump right out when polished and really blend in the background if honed or leathered. Polished will really emphasize all of the contrast of colors and textures. Polished is generally easy to keep clean but if a stone is softer and more of a marble than granite, and if prone to etching like classic marble is, a honed surface will be an easier care finish because it will hide the etch marks more than if polished. A sealer can protect from stains but etching is another problem. The honed surfaces, of marbles especially, will have a natural glow and soft sheen rather than a high gloss and might be more appropriate for a vintage look for example. Also the honed will not have the reflection that the polished will (see your picture and the light reflection difference), but that depends on where it will be located. Perimeter polished countertops for example will show the under counter lighting in the reflected surface for example and a honed or leathered will not. Sometimes people don't notice that and it does not bother them at all and sometimes it does. Or can be a trade off (like most things!). Some people love the classic polished. It all depends on what effect you want the entire room to have. Honed surfaces will soften colors and contrasts of the stone and have a less dramatic effect. Also the honed stone surfaces, to me, will be less cold to the touch than the polished (under the exact same conditions and temperatures), or I have thought so in my sample testing, if that is a consideration. Of course, you can always heat the edges if you like (see a recent GW post about that.) Using the thin (1/8" or so) mesh that is typically used for under tile flooring. The leathered finish add a physical texture to the stone and it has the other characteristics of the honed. It is typically more difficult to have a clean seam with leathered but since yours will be an island, you probably should not have a seam. The leathered will have an additional texture that will be seen with grazing light across the surface (think morning or evening light coming in across the counter through a window), but not as much with overhead light. The leathered is much more popular and more available than it used to be (and fabricators with the right equipment and talent can leather most any slab). There are quite a few that are available right from the slab yards. I have seen several striking ones recently that I would have thought would not have looked good, but it was striking. From what I mentioned earlier about a softer look and the matte vs gloss finish, the leathered (or honed for that matter) can have an enhancing sealer applied that will darken it. You may or may not want it that way so BE SURE to know what the sealer the fabricator uses or know what you want it to be, and tell them. Be very cautious on this step. Sealers are an afterthought to many fabricators and some just get on auto pilot and do what they always do, and if its different from what you want, you can get disappointed. (Just look at some recent GW threads). So be sure to know which you want. See if you can find any place that has the same stone in two different finishes. Look at the DIFFERENCES in the stone in texture, color and details. It does not matter if you like the stone or color. For just looks alone, which finish gives you the look you want? Most sealers can help with stain resistance issues (and some stones don't need sealing at all). And if you like the texture and clarity, but want it darker, an enhancing sealer can be applied. And by the way, most enhancing sealers just darken and do not add a shiny finish, do always ask them to do a small sample to show you for approval. And get that in writing too. If you're not sure if you would like it darker or you want to see how dark it would get, just wet with water. It will get that color. This is an important question and don't feel rushed. What is a little extra time in the big scheme of things? Have them wait till you do a little more research. I'm not sure if I've directly answered your question but I hope I've given you some things to check on and some information to help make your decision. Please share your progress.

Hi. I'm getting a new granite countertop myself--it will be installed on Tuesday! So I have been doing lots and lots of looking at granite-- both in person (went to lots of warehouses) and in magazines. The trend is definitely toward lighter stone countertops, judging by what I see in the the magazines. (Carrera marble is also getting more popular in those designer kitchens, for some inexplicable reason. Marble is not practical in a kitchen, so many people are trying to imitate that look with certain granites, like white river. ) This trend toward lighter granite was verified by several granite sales people at the warehouses and fabricators I spoke with. Of course, this may be a regional thing. I live in Maryland, near D.C. , where everyone and his brother, it seems, is getting granite! Have you thought about checking out a lighter stone, like a cream or white? (such as Bianco romano, white shivakashi, Colonial Cream, white river, among others.)I am getting Harvest Cream, which is similiar to Colonial cream. It has a white or off-white background with lots of golden accents that pick up the color of my cabinets, and grey/black and taupe accents and a light sprinkling of garnet(burgandy) in there too. My cabinets are honey-spice maple (installed 10 years ago with a formica countertop). We did some minor remodeling that called for a new countertop--so I was so glad I didn't spend the big bucks for the corian that was so popular back then, and that I had an excuse to now get granite! I'm not sure how dark your "autumn" cabinets are, but you should try to have some contrast. If your cabinets are dark or medium dark, I think that a very light granite would provide a great contrast with your cabinets and darker floor, but that is just my personal opinion. Are you going for a traditional or contemporary look? Black tends to look "modern". If you do want a very dark countertop, I would think that a very dark brown would look better than black with your mocha floors(which I assume is a very dark brown.) You probably already have thought of this, but when you go to the granite warehouses to select your slab, bring a cabinet door and piece of your flooring to see how it all looks together. Another thing to consider is what you want on your backsplash. If you want a very "busy" stone or tile, then you should select a granite that would not look too busy, so the darker colors would work well for that, usually. I am going to go with a tumbled white travertine backsplash. If I went with anything busier, it would "fight" with my granite. Hope this helps. Hope this helps.

Need advice please. have island 10ft long island x 4ft 2" (50inches)wide. overhang will be 12 inches down the entire 10ft length. have 24"d base cabinets plus another 12"d set of base cabinets back to back. (36 inches of base cabinets that granite will sit on). question is how many support posts will be needed down the 10ft length of overhang ?(14inch overhang) Will one support post on each end be sufficient or do I need 3? can't add metal supports into top of cabinets, not enough space between the cabinet doors and top of cabinets. no room for corbels. support posts are the only option. would like one on each end vs adding one in middle. help!