Counter top installation tolerances
Marinebob
10 years ago
Featured Answer
Sort by:Oldest
Comments (36)
Granite City Services
10 years agosnoonyb
10 years agoRelated Discussions
Installing pedestal sink basin on vanity counter top question
Comments (12)Thanks. I don't comment on fixtures often, but I do have to say I think the Memoirs is a lovely sink. The sink itself is large, the wide rim I absolutely love, and it has a good-sized bowl. It is indeed a nice sink. We had the same feelings over the backsplash. We went back and forth between painted wood or teak. I thought the teak backsplash would make the Memoirs pop more due to contrast, but my wife didn't want too much wood grain in the room. So we did painted wood which I topped with a teak cap. If my wife ever did want teak, I told her I'd simply glue a teak veneer over the painted wood. It's still painted. That run of cabinetry changed a couple of times during the design process. It was originally going to be a spacious 2-sink vanity. My wife really insisted on one sink! So that freed up space for the floor-to-ceiling storage closet on the left and what we call the "toilet pantry" on the right. The design has worked quite well for us over the years, I built it around 15 years ago. My daughter, who was 7 or 8 years old at the time, designed the profile for the toe kick cutouts. That was quite a bit of fun "working" with her. If you go in another direction, no worries. Choose what works best for you....See Morecarrara marble counter tops installed today!
Comments (28)Thanks for the nudge Breezy and Fishies! It's long over due. See my link below... drbeanie2000 - you better believe it! Yes, I love my kitchen (and the rest of the house) mostly because it's all mine and we are settled. All the little things I agonized and fretted over don't seem so worrisome now. Actually, all the little things I own and will go on the "in the next house" list. ha! All in all, I am happy will all my choices and am thoroughly enjoying it all! What more could I ask for, eh? Here is a link that might be useful: my full spec reveal post...See MoreBad counter top installation
Comments (5)You are over reacting. It is common to need to do some drywall work and touch up following counter install. Granite has a crystalline structure. Very often a newly installed counter will have small crystals popping out for quite a while. You can rub it with steel wool every so often until it stops shedding. That too is normal. Never ever use the nuclear option until you are sure that you are in the right. You are not here, and it makes you look completely unreasonable....See MoreI'm so frustrated! Quartz counter-top installation problems again
Comments (51)Here are a some pics and my dilemma. Keep in mind this is my old fridge...new one comes today! Here is how we ended up with this: I have never had an enclosed fridge so didn't think about the peninsula dying into panels or how deep panels were going to be. I "semi" designed the new footprint and took it to Lowe's where the KD took over. (yes---I know......) Bought Schuler plywood with maple fronts cabinets. Although the kitchen designer had the model number of the fridge we were buying, which is a full-size, she designed the kitchen with 24" deep panels. She knew I was trying to have the look of an enclosed fridge. Being that I've never had an enclosed fridge, it was something I just didn't think of until the install started. Evidently she put a counter-depth in the design program because the elevation sketches she gave me showed an enclosed fridge. "Luckily" the panels actually came in wrong and were cut at only 23" for some strange reason and the installer caught it right away when looking over everything. Otherwise he probably would have installed them and I would be stuck. So called Lowe's to reorder the panels and somehow in all this it suddenly dawned on me that a full size fridge was going to be deeper and require deeper panels. I thought "no problem! Yay I can order them at 30!" By this time the KD had quit her job due to the pandemic. The other KD didn't know what was going on so we called in the Schuler rep. She was the one who immediately told me that those 30" panels would be sticking out in front of the peninsula. She asked if we could move the peninsula forward since the other side is an overhang for seating, but we couldn't since it would bottleneck the entrance into the kitchen down to under 36" and getting rid of an existing bottleneck was one of the reasons for the re-design to start with. So we had a dilemma. We cannot go down to a counter depth fridge which was the other option. What I decided was to split the difference and order 27" refrigerator panels. The fridge without doors is 29.5" so I will have about 3" of the side of the fridge sticking out which I don't like, but while I want my kitchen to look beautiful, I value the functionality too. The old fridge that you see in the pic sticks out a total of 32" The new fridge will stick out 34 with doors but without handles (4.5" of that is doors that would stick out anyway) Here's the really complicated part....we will be installing decorative panels on the end of the fridge as we have them on all the cabinets. This is how you enter the kitchen and I don't want that big blank space there next to the peninsula. The panels should be installed with just 1/4" reveal. I posted a photo below of how the panels look that are already installed on the side of the pantry that adjoins to a 17" high window seat. Luckily those face the opposite way from the fridge panels so you will never see both at the same time. I also posted photos of us holding up panels on the side of the fridge (they are NOT the right size panels...we have to order those still---we just used these to look at the right edge as to how wide to make the panels.) Also keep in mind we can remove the quartz backsplash piece if that would look better. That was not originally planned...the panels were going to sit directly on top of the countertop. So do we order the panels with just the 1/4" reveal to match the panels in the rest of the kitchen? Or, as the Schuler rep recommended, order the panels so they are the same width with the countertop, leaving about 1 3/4" reveal on the right side, but then your eye follows the countertop all the way up. I asked the countertop templater guy if I should just lengthen the overhang on the kitchen side of the peninsula to 2.5" to bring it out to within 1/4" of the fridge panel but he said no....I'm now thinking I should have insisted on it. Especially since we have full overlay cabinets that already make the overlay look very small since the 1.5" planned overhang is measured from the box, not the front of the drawers. Note how small the overhang looks to the drawers. And then of course, they had templated for a 1.5" overhang and I only got 1.25" UGH! Every quarter inch there would have made the reveal on the side of the fridge less. Suggestions appreciated! I'm hoping that I will eventually make peace in my mind with this issue and won't notice it but it is driving me crazy right now. I think of all the things that screwed up just because of this one error by the KD that I didn't catch and I am beating myself up for it!...See MoreJoseph Corlett, LLC
10 years agoMarinebob
10 years agoMarinebob
10 years agosnoonyb
10 years agoUser
10 years agoMarinebob
10 years agohank-mountainmarble
10 years agosnoonyb
10 years agoMarinebob
10 years agoJoseph Corlett, LLC
10 years agorollie
10 years agosnoonyb
10 years agoUser
10 years agoMarinebob
10 years agosnoonyb
10 years agohank-mountainmarble
10 years agolive_wire_oak
10 years agosnoonyb
10 years agoMarinebob
10 years agodebrak2008
10 years agosnoonyb
10 years agoMarinebob
10 years agosuzanne_sl
10 years agoannkh_nd
10 years agosnoonyb
10 years agosuzanne_sl
10 years agoMarinebob
10 years agoM4rtin
10 years agoMarinebob
10 years agoMarinebob
10 years agoMarinebob
10 years agojellytoast
10 years agoMarinebob
5 years ago
Related Stories
KITCHEN BACKSPLASHES10 Top Backsplashes to Pair With Concrete Counters
Simplify your decision making with these ideas for materials that work well with concrete
Full StoryKITCHEN DESIGNTop Colors and Materials for Counters, Backsplashes and Walls
Neutral colors and engineered quartz reign in kitchen remodels, according to the 2020 U.S. Houzz Kitchen Trends Study
Full StoryGREAT HOME PROJECTSHow to Install a New Tile Floor
Is it time to replace your tile floor? Here’s how to get it done, which pros to call and what it will cost
Full StoryKITCHEN BACKSPLASHESHow to Install a Tile Backsplash
If you've got a steady hand, a few easy-to-find supplies and patience, you can install a tile backsplash in a kitchen or bathroom
Full StoryREMODELING GUIDESContractor Tips: How to Install Tile
Before you pick up a single tile, pull from these tips for expert results
Full StoryHOUZZ TVHouzz TV: How to Install a Rain Barrel
This DIY tutorial shows how easy it can be to capture rainwater from your roof to use in your garden later
Full StoryDINING ROOMSNo Room for a Dining Area? Install a Banquette
With built-in banquette seating, you can squeeze in a place to dine, even in a small space
Full StoryGREAT HOME PROJECTSHow to Install Energy-Efficient Windows
Learn what Energy Star ratings mean, what special license your contractor should have, whether permits are required and more
Full StoryPETSHow to Install a Dog-Washing Station
Find out the options for pet showers and bathing tubs — plus whom to hire and what it might cost
Full StoryEARTH DAYHow to Install a Green Roof
Covering a roof with low-maintenance plants has benefits beyond just beauty. Get the details here
Full Story
MarinebobOriginal Author