Painting dresser .... suggestions

17 years ago

DD and I are going to paint a dresser this spring (when it get warmer) that is currently stained. I figured I'd sand it a bit and since she wants knobs, we'll use wood putty to fill holes and then paint. My question is with latex paint I've never gotten "great" results painting the few pieces I've painted. Should I use an oil based paint instead of latex? Which would be best - not necessarily easiest. We're thinking painting it something bright and funky .......... thanks!

Christy

Sort by:Oldest

Comments (5)

sweets98
17 years ago
I'm not sure if you will be able to find Oil based...it's getting harder and harder to find these days...

Latex does work. I wouldn't worry about sanding except the wood putty. I have yet to sand anything before painting it. Then I would prime it good (I use Kilz) and allow that to dry. Then I usually do like 2-3 coats of paint to make sure things are good and covered. I use brushes for around the hard to reach places and a small roller for the rest. Allow that to dry a few days and then if you want extra protection from scratches and such, use a sealer.
0
cburch
Original Author
17 years ago
Sounds good. THANKS!
0
Related Discussions
Any ideas for painting a little girls dresser?
Q
Comments (1)
Here's one the previous owners left for my daughter
...See More
Painting a dresser: paint the drawer sides/insides? Prime?
Q
Comments (7)
Thanks guys :) Here's a photo of the dresser: (wi-sailorgirl, can you believe I'm doing something so vintage?!?!?!? It's so not my usual style... but this is the second bath: it's the general household-use bath but ALSO my teen daughter's bathroom. And she REALLY didn't want sleek and modern!) I don't have a photo of the sides of the drawers, but they are mostly still raw wood, except the person who painted it last slopped the maroon paint around the edge onto the dovetail joint. I guess I will try to sand that off and then just paint the fronts. sailorgirl, the lower two drawers won't have glides, they'll remain as-is, with just old-fashioned wooden guide rails. The top two drawers need to be cut back pretty severely, and their center rail removed for the sink, so those two WILL have new, undermount glides installed. I'll try to take some pics of the drawer insides and sides, too... I have a gorgeous piece of Vermont White quartzite (pretty grey, actually) that's been cut to fit the top, with the curvy front, and a white Kohler undermount sink. I'm thinking about doing faceted crystal knobs, too. it's a real departure from my normal style :) I've just laid the radiant floor heat wiring last night and will be pouring the self-levelling compound today. Can't wait to start tiling! Stacey
...See More
Painting laminate dresser
Q
Comments (3)
Way back in 1991, budget being very low, I got a horridly laminated but pleasantly simple TV cabinet and painted it white. Good quality undercoat, and two coats of good quality eggshell enamel. I still have it -- not a chip in all that time. Indeed, no guarantees, but it worked for me.
...See More
painting dresser
Q
Comments (7)
You know, well, you don't, but a few years ago I painted some IKEA bureaux and I used super-sticky primer, the kind which will attach to a non-porous surface. I used ZINSSER BIN, and I would absolutely recommend it. For the paint I used whatever paint (meaning, it doesn't have to be a special formulation -- mine was a Benjamin Moore product), and I rolled it on using a foam roller and then a brush in the corners. (Before priming I puttied the existing hardware holes and drilled my own. And then after painting [and when it had fully dried, and it'll take a l-o-n-g time to dry if it's laminate] I added the nailhead trim.) But seriously, do not skip the primer step -- you will seriously regret it if you don't because the paint will begin to peel and / or bubble, and that would just make it a waste of your time. That being said, nothing is perfect. I still had an area bubble, so I had to cut away the gummy paint, lightly sand that cut-away area, spot-prime, spot-paint, and then paint again over that one area (so it was smooth). But, I got what I wanted for a little bit of money, and truthfully, I adore this kind of project. So much fun. I hope yours is fun as well! There was something on my camera near the bottom left pull, but to the left of that spot *is* a scratched area so you can see what I mean about nothing being perfect ....
...See More
Related Professionals
View Park-Windsor Hills Interior Designers & Decorators · Mesa Furniture & Accessories · Tulsa Furniture & Accessories · Washington Furniture & Accessories · Aventura Furniture & Accessories · Millburn Furniture & Accessories · Rancho Santa Margarita Furniture & Accessories · Sahuarita Furniture & Accessories · Pico Rivera Custom Artists · Miami Lighting · Pasadena Lighting · Sarasota Lighting · Suitland Lighting · Chicago Window Treatments · Grosse Ile Window Treatments
hockeymom4
17 years ago
If you go over to the paint forum and scroll around a little, you will probably find a post on painting furniture. There is lots of good advice over there.
0
acomom
17 years ago
I had a painter use the Benjamin Moore Satin Impervo enamel paint on some old cabinets on the advice of another GW member (Grlwithaspirin, maybe?). I loved it - it wears like a semi-gloss without the super-shiny finish. I think it would work great on a dresser.
0
smile
17 years ago
We just finished painting an entertainment center that was originally stained. The people on the paint forum generally recommend either Cabinet Coat paint (hard to find), BM Satin Impervo, or SW All-surface enamel. We used the BM paint and it came out pretty good. I wanted a white storage system for the playroom (similar to PBK), but since they were so expensive, we decided to try to paint our oak cabinet. DH didn't spend alot of time on it either, b/c we didn't care for it to be perfect (a. since we figured we'd be replacing it next year with the new TV standards, and its not in a room that is seen by guests). He used primer (a mix of what we had in the garage, some parts were painted in Kilz and then Zinnser), and then a small roller + brush for the rest. He sanded only between primer and paint, and used approx 2 coats but didn't wait much for the coats to dry. So basically, what I'm trying to say that even though he didn't do things by the book, it still turned out pretty good, even with a tough wood to paint (oak has all that grain that shows through the paint, my original reason for wanting to replace rather than attempt to paint). We have used Satin Impervo before for trim painting and DH has prefered it over semigloss latex. I once used the All Surface Enamel for outdoor rockers. I think it was harder to use than the impervo, but still good quality paint (it was recommended for outdoor use unlike the Impervo). HTHs!
0

Painting dresser .... suggestions

Comments (5)

sweets98

cburch
Original Author

Related Discussions

Related Professionals

hockeymom4

acomom

smile

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

Painting dresser .... suggestions

Comments (5)

sweets98

cburchOriginal Author

Related Discussions

Related Professionals

hockeymom4

acomom

smile

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

cburch
Original Author