Slate - Does this make sense?
fayemarie
16 years ago
Featured Answer
Comments (24)
oruboris
16 years agofayemarie
16 years agoRelated Discussions
Does peninsula seating make sense in our kitchen? Layout help
Comments (10)Round and round on what to do...very familiar ground for most of us here! About your layout above... I get that you want: More counterspace (and, I assume, placed where it will actually be useful for prepping) Keep some form of FR in the existing space - is that b/c of the fireplace? Keep the formal DR as-is b/c you don't want to knock down the load-bearing wall b/w the kitchen & DR Keep the formal LR as-is since you don't want to knock down the load-bearing wall b/w the kitchen/FR & LR Have table seating in the kitchen itself -- or -- Have peninsula seating But... You have very limited space to fit all that in - that's why you currently don't have a lot of counterspace. So, if you aren't willing to add more space (by adding onto the house or by merging existing spaces), it's going to be difficult to "have it all" The peninsula, as drawn, will not comfortably seat 5 people and seating inside the "U" puts people in the middle of the work space. That seat on the end is also in the aisle of what you have said is a busy path. So, are you willing to consider doing a few things such as: Move/change windows? Open a doorway in the LR wall to lead into the LR - not so wide that you have to do expensive load-bearing posts, etc., but wide enough for a doorway? Move the Powder Room to add that space to the kitchen? Move the closet? Eliminate the FR as a "FR" and merge it into the kitchen to add yet more space? Here's a layout that might work if you're willing to make the changes I asked about above. (Note: Your floor plan is missing key elements like the windows on the top wall in the kitchen and the measurements in the other rooms since they are not all the same size...I think I've got them.) General... The Powder Room and Closet have been relocated to off the Foyer. They do take about 6" off the FR/LR, but I don't think it's an issue(YMMV) The former PR + Kitchen have been merged into a larger kitchen The FR has been converted into a dining area that's completely open to the kitchen - much more comfortable seating for everyone for meals, visiting, etc. With it open to the kitchen, guests can easily sit there and enjoy your company + fireplace + comfortable seating. A 5' wide doorway has been opened b/w the former FR/now table space and the formal LR The formal LR has been converted into a Family/Living Room. You might consider a future fireplace (gas or wood-burning) in that room as well...if you're into fireplaces (I am, so if you are, I can relate!) The formal DR can remain as-is or it could be converted to a Library/Computer Room with a comfy chair or two that would be a quiet respite from the hectic day-to-day activities! Put a door at both entrances (Kitchen & Foyer) to close it off when needed - for either quiet or to keep casual traffic out of it to help keep it tidy. ......See MoreRanch remodel/addition Does it make sense to move walls?
Comments (19)Judy G did you find "track home?" Like so many words ending in "ct," the word "tract" often gets butchered. I won't even tell you how much "Duck Tape" gets my goat! When I learned that a company actually named theirs that, I was quite discouraged that we would ever get duct tape pronounced correctly. Everyone does it, so don't feel I am picking on you, Samantha. I like Rinq's ideas. But since you cannot move the bedroom wall to the left, you just move it toward the back. Notice that the dining room has moved entirely to be behind the kitchen, so the dining area is now part of the living room. It makes that room bigger without moving the plumbing, That saves a ton over moving the living room into where the bathrooms are. The only possible problem with this plan is that the garage walk-though door is now in the laundry. It may be that you need it, by code, to go into the garage. Is there going to be another door from the house into the garage in your plan, Rinq? I see a little bit of space in the hall between the door to the half-bath and the wall to the garage where a shallow pantry cabinet can go. I had 12" deep ones in my last hose and they held a lot....See MoreDoes upgrading to impact resistant windows make sense?
Comments (46)Evolution, For what it's worth, I happen to really like your product concept which leads to a quick story.... About 15 years ago (give or take a couple), a guy i was working with on a project asked me to help him out with an idea that he had about hurricane protection shutters. His thinking was that the major downside of shutters and plywood (pretty much 100% at the time) was that they covered the window making it impossible to see in or out. He had the idea of building shutters out of polycarbonate that wouldn't ever have to be removed from fixed windows, and when installed over any window wouldn't block the light or the view. My thinking was that he had a heck of a good idea and I offered encouragement and helped him with a few simple calculations and some minor proof of concept ideas. We lost contact not long after and I THINK he was contemplating moving to florida, but don't recall for certain. Anyway my point was that I had to wonder when I was looking at your website. Have to admit it made me wonder... To questions/comments.... 1) Nothing involving storm protection (or bullets, or bombs, etc) is proof. Resistant, yes, proof, no. Laminated glass is shatter-resistant, that's what it's for and there are required tests that exist to confirm. A dual pane impact window is with very few exceptions manufactured with one laminated lite and one non-laminated lite. As I mentioned previously, it's possible for the laminated lite to be mounted as interior or exterior, often depending on how the glass was glazed into the sash. If the laminated lite is inside and the window is broken by an impact then the loose (non laminated) broken glass WILL remain outside the building blocked by the laminated lite that isn't going to shatter. This is the make-up that I personally prefer and would generally recommend, and i have never been shy about telling people that here or real time. If the laminated lite is outside and it takes an impact that is powerful enough to break both windows, then breaking the inner non-laminated lite will result in broken glass inside the home. You have seen the hurricane impact on you tube, so have I, but I haven't seen a video of an impact that shows the glass shattering and flying into a room. In all seriousness I can't find one even though I looked for it. Can you drop a link, I am very curious to see it. I have personally performed, participated in, and/or witnessed impacts over 3000 times. I have also witnessed testing for impacts based on tornado level wind-speeds, but have never performed that test myself. The tornado test is a 12', 15#, 2x4 at 150fps. Interesting thing about the tornado testing was that over half of the impacts that I witnessed (and that was typical), the 2x4 shattered into kindling when it hit the glass and the glass was undamaged. I mentioned earlier that it is entirely possible to manufacture laminated glass that won't break when tested to TAS201 large missile and/or ASTM 1996, any level. I can think of three ways to do it as I type, and while I KNOW for a fact they all work because either I have personally been involved with manufacture and testing it or else coordinated with people who were, they aren't generally available outside of specialized applications. 2} There is no requirement for testing a window for water penetration after impact, primarily because they are two different test requirements from two different agencies. The impact test is all about the product's resistance to penetration by the 2x4. The glass can break, but penetration of the glass isn't allowed. If the interlayer isn't torn then water can't penetrate it, broken glass or not. 3) The requirement for water resistance testing is not related to or is part of the impact test protocol. As mentioned previously, windows are required to be tested for water penetration based on the DP level, and it makes zero difference whether the window is impact resistant or not, other than impact windows often have higher DP than non-impact windows. Although the requirement is based on the DP, this doesn't mean that's the maximum window performance. While I do know specific companies that do test higher than the DP requirement for their impact windows, I have no idea how many actually do so....See MoreDoes this warming drawer placement make sense?
Comments (11)@tealouI currently have a Wolfe dual fuel. I love the gas burners and that Wolfe designs them such that if you need LP for the fuel, you can purchase a range specifically for LP fuel and the BTUs won't drop when a converter is added to gas ranges built for natural gas. While the oven in my current Wolfe bakes well, it has the oddity of needing to let the oven cool down by 150 degrees in temperature should I need to increase the oven temperature later for another need once the oven has already been at temp for a lower temperature. To me, this was a very stupid design by Wolfe (my range was purchased in 2005). Additionally, I hear there is now a problem with the newer models where the blue enamel is chipping off. This is why I am buying a range top and a wall oven, to avoid the oven issues in the Wolfe. I do use my current warming (including for proofing bread dough), but it is at the bottom of the cabinet, and it would be used more if more conveniently placed. My oven is mainly used for roasting, I do not use it for baking a lot of pies/cakes, cooki...See Morelive_wire_oak
16 years agofayemarie
16 years agokksmama
16 years agooruboris
16 years agomanhattanmatt
16 years agoBoopadaboo
16 years agooruboris
16 years agobernerfolk
16 years agomanhattanmatt
16 years agoilmbg
16 years agoglennsfc
16 years agofayemarie
16 years agoglennsfc
16 years agooruboris
16 years agomondragon
16 years agotootiepugsmom
15 years agomondragon
15 years agobill_vincent
15 years agoparedown
15 years agoLwarren2_roadrunner_com
15 years agoOlga Kramar
8 years agolast modified: 8 years ago
Related Stories
GARDENING AND LANDSCAPINGSenses and Sensibility Make a Melbourne Patio Magical
Plants that appeal to the 5 senses, one-of-a-kind fences and plenty of space for entertaining cast a pleasing spell on the whole family
Full StoryINSIDE HOUZZHow Much Does a Remodel Cost, and How Long Does It Take?
The 2016 Houzz & Home survey asked 120,000 Houzzers about their renovation projects. Here’s what they said
Full StoryGREEN BUILDING5 Common-Sense Ways to Get a Greener Home Design
You don't need fancy systems or elaborate schemes to make your home energy efficient and sustainable. You just need to choose wisely
Full StoryMOST POPULAR5 Remodels That Make Good Resale Value Sense — and 5 That Don’t
Find out which projects offer the best return on your investment dollars
Full StoryLANDSCAPE DESIGNMake Your Garden Come Alive With a Sense of Movement
Master the illusion of motion for an exceptional garden that stirs emotions and the imagination
Full StoryFEEL-GOOD HOMEDesigning for Pleasure: Appeal to the Senses at Home
Homes that look, feel and smell good foster mental and physical well-being. Here's how to create sensory comfort in all kinds of rooms
Full StoryFEEL-GOOD HOMEDoes Your Home Make You Happy?
How to design an interior that speaks to your heart as well as your eyes
Full StoryBATHROOM DESIGNDream Spaces: Spa-Worthy Showers to Refresh the Senses
In these fantasy baths, open designs let in natural light and views, and intriguing materials create drama
Full StoryMOST POPULARWhen Does a House Become a Home?
Getting settled can take more than arranging all your stuff. Discover how to make a real connection with where you live
Full StoryREMODELING GUIDESBathroom Workbook: How Much Does a Bathroom Remodel Cost?
Learn what features to expect for $3,000 to $100,000-plus, to help you plan your bathroom remodel
Full Story
bill_vincent