Microplane Your Feet
18 years ago
Featured Answer
Sort by:Oldest
Comments (28)
- 18 years ago
- 18 years ago
Related Discussions
Microplane?'s
Comments (16)I have one Microplane with handle and an Accutec - no handle and extra-fine holes on one half and fairly coarse holes on the other half. Both are stainless steel. In all, I have three different sizes of holes. I don't have one with large holes and not sure if I need it because I have a nice box grater. All of mine get used all the time. It's nice having a variety of sizes, so if you can find a "package" deal with several sizes in it, it may be less expensive than buying them individually. I agree about taking care cleaning them - they can "bite". Remember to clear off the back side because there is usually a lot of grated material accumulated there. I have a nice 6-cup Cuisinart Food Processor and I hate using it. I probably drag it out a couple times a year - and have to figure out how to use it all over again, decide which disk for what use, and then the horrors of clean-up....... No, I don't put it in the dishwasher, I clean it by-hand. I use my little Ninja Food Chopper all the time instead of dragging out the Cuisinart. It's small, easy to use, and does a good job for things I need done. Definitely a "different strokes for different folks" thing. -Grainlady...See MoreNeed microplane/garlic technique help
Comments (10)I have posted this picture before as a cautionary tale. That is the compression bandage the doc had to put on my finger to try to staunch the bleeding so he could see exactly what I had done to myself. If it looks a little odd, it is because it was done at his home instead of his office. He's a neighbor and it was late on a Saturday afternoon. Yes, I thought I didn't need the guard and I could just be really really careful. Thanks for the glove link. I want one for my mandoline...to use in addition to the guard....See MoreGetting Cold Feet - Your experience please
Comments (5)Operating costs? If you can open and close the pool yourself, and you should learn to do that, the labor is free. I'm in CT. It takes me about a half-day to close my pool in the fall. I drain the water down overnight to drop the water level about 20" below normal. The next day I blow out the plumbing and cap all the water lines in the pool and spa shell. I drain the skimmer and put a couple of those collapsable/crushable thing-a-ma-jigs for freeze protection. I install the loop-loc pool cover. I drain the equipment (pump, heater, filer), clean the filter cartridges, etc. Close the propane valves on the tank and heater. To open the pool? Remove the cover. Winter snow and rain have my pool water level back up to full. Remove the plugs on the pool and spa return lines and from the skimmer basket. Prep the filter/heater/pump, which simply means closing any drain plugs, setting the cartridges in the filter, etc. Opening the gas valves for the heater. Takes a few hours to open the pool. Once open, I vacuum the pool and hit it with chlorine. I use liquid (12%) Chlorine. In a couple of days when the chlorine returns to normal levels, I do a full water test and balance as needed. My pool (20' x 40', about 20000 gallons) is open from April to mid-November. It has a side-spa. I don't heat the pool, but I do heat the spa. I have a variable speed pump, a Pentair 011018. Highly recommended. I draw about 2kW per day total running the pump on low-flow for about 10 hours a day, for about 2 hours a day it's bumped up to high-flow for spa use or when the sidewall cleaner is in the pool. It's quiet, and all the fluff about energy savings? For me it's true. Electricity is expensive in CT and this pump is saving me about $100 a month over what my old Pentair single-speed 1-1/2 hp Whisper pump cost to run. The level of savings surprised me. But it is real. Test kit? I recommend a good Taylor-type of test kit. The initial kit ran me about $100, but over time I'm probably spending $30-$40 a year to test. You need a good test kit. It'll save you big time in head scratching and in wasting chemicals as you chase balanced water chemistry. I sanitize with 12% liquid chlorine, about $3.50 a gallon. I use a little over a gallon per week, or roughly $20 per month. When I open the pool there's usually $50 each year to balance the water. Sometimes baking soda, sometimes acid, or whatever. Some years I open the pool and the water is perfect. All I have to add is chlorine. The Taylor-type of kit won't lead you astray. I spend roughly $200 on chemicals from opening day to closing day. Daily maintenance? I get cup of coffee most mornings and go out by the pool. It takes a few minutes to skim off any leaves or debris. Most days there isn't any. In spring (pollen) and fall (leaves) I may have to do it twice a day. Takes a few minutes. Once or twice a week I'll toss in the sidewall cleaner and let it run for a few hours. For me, daily maintenance is pretty minimal. The pool has been in now for about a dozen years. I swim most every day that I'm home. I have turn tiles on each end of the pool, so I swim laps. My kids are now out of the house. I wanted a pool, because I knew I'd use it myself. If I didn't want it and I put it in for my kids, or for my wife, or to impress the neighbors, then the pool might be a bit of a chore, even if the daily/weekly maintenance is minimal. Equipment? For a spa, I recommend you get a 400k heater. It essentially takes the same volume of propane or natural gas to heat your spa from 80-degrees to 98-degrees. A 400k heater simply does it faster than a 200k heater. I don't know much about heat pumps, but my understanding is they have a v-e-r-y slow response time. I have a Raypak 400k heater. No regrets. Easy to maintain. Pump. Already mentioned the Pentair. Quiet and efficient. I'd get another if this one failed. Filter. I over-sized my filter. I have a Pentair Quad DE 100 filter. I like cartridge filters, it may simply be because that's what I've always used. I only have to clean the filter carts once, that's at the end of the season when I winterize. With my old "properly sized" filter I had to clean the carts 2, sometimes 3 times a year. So...a lengthy reply. Hopefully somewhat useful. But it is simply my opinion on how my pool works for me. And how sometimes I work for it. lol Overall, no regrets....See MoreYour help in choosing MB finishes for claw feet and mirrors and sconce
Comments (3)You have a lot of different elements here, yes, they’re all pretty, but I would reconsider the two toned cabinet thing - I think it will be too much. So where is the patterned tile going and the small dark square tile going? I’m a bit confused by everything lol...See More- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
- 18 years ago
Related Stories

KITCHEN APPLIANCESConsidering a New Kitchen Gadget? Read This First
Save money, time and space by learning to separate the helpers from the hassles
Full Story
KITCHEN DESIGNCreate Your Own Checklist for a Well-Stocked Kitchen
Personalize the kitchen with your own must-haves from our list of top cooking tools, small appliances, pots, pans and more
Full Story
jimtex